Download or read book Signal Processing and Integrated Circuits written by Hussein Baher and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced account of analog, digital and mixed-mode signal processing with applications in telecommunications. Part I Perspective gives an overview of the areas of Systems on a Chip (Soc) and mobile communication which are used to demonstrate the complementary relationship between analog and digital systems. Part II Analog (continuous-time) and Digital Signal Processing contains both fundamental and advanced analysis, and design techniques, of analog and digital systems. This includes analog and digital filter design; fast Fourier transform (FFT) algorithms; stochastic signals; linear estimation and adaptive filters. Part III Analog MOS Integrated Circuits for Signal Processing covers basic MOS transistor operation and fabrication through to the design of complex integrated circuits such as high performance Op Amps, Operational Transconductance Amplifiers (OTA's) and Gm-C circuits. Part IV Switched-capacitor and Mixed-mode Signal Processing outlines the design of switched-capacitor filters, and concludes with sigma-delta data converters as an extensive application of analog and digital signal processing Contains the fundamentals and advanced techniques of continuous-time and discrete-time signal processing. Presents in detail the design of analog MOS integrated circuits for signal processing, with application to the design of switched-capacitor filters. Uses the comprehensive design of integrated sigma-delta data converters to illustrate and unify the techniques of signal processing. Includes solved examples, end of chapter problems and MATLAB® throughout the book, to help readers understand the mathematical complexities of signal processing. The treatment of the topic is at the senior undergraduate to graduate and professional levels, with sufficient introductory material for the book to be used as a self-contained reference.
Download or read book Integrated Circuits for Analog Signal Processing written by Esteban Tlelo-Cuautle and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.
Download or read book DSP Integrated Circuits written by Lars Wanhammar and published by Elsevier. This book was released on 1999-02-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: DSP Integrated Circuits establishes the essential interface between theory of digital signal processing algorithms and their implementation in full-custom CMOS technology. With an emphasis on techniques for co-design of DSP algorithms and hardware in order to achieve high performance in terms of throughput, low power consumption, and design effort, this book provides the professional engineer, researcher, and student with a firm foundation in the theoretical as well as the practical aspects of designing high performance DSP integrated circuits. Centered around three design case studies, DSP Integrated Circuits thoroughly details a high-performance FFT processor, a 2-D Discrete Cosine Transform for HDTV, and a wave digital filter for interpolation of the sampling frequency. The case studies cover the essential parts of the design process in a top-down manner, from specification of algorithm design and optimization, scheduling of operations, synthesis of optimal architectures, realization of processing elements, to the floor-planning of the integrated circuit. Details the theory and design of digital filters - particularly wave digital filters, multi-rate digital filters, fast Fourier transforms (FFT's), and discrete cosine transforms (DCT's) Follows three complete "real-world" case studies throughout the book Provides complete coverage of finite word length effects in DSP algorithms In-depth survey of the computational properties of DSP algorithms and their mapping to optimal architectures Outlines DSP architectures and parallel, bit-serial, and distributed arithmetic Presents the design process in a top-down manner and incorporates numerous problems and solutions
Download or read book EMC of Analog Integrated Circuits written by Jean-Michel Redouté and published by Springer Science & Business Media. This book was released on 2009-10-10 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental electromagnetic pollution has drastically increased over the last decades. The omnipresence of communication systems, various electronic appliances and the use of ever increasing frequencies, all contribute to a noisy electromagnetic environment which acts detrimentally on sensitive electronic equipment. Integrated circuits must be able to operate satisfactorily while cohabiting harmoniously in the same appliance, and not generate intolerable levels of electromagnetic emission, while maintaining a sound immunity to potential electromagnetic disturbances: analog integrated circuits are in particular more easily disturbed than their digital counterparts, since they don't have the benefit of dealing with predefined levels ensuring an innate immunity to disturbances. The objective of the research domain presented in EMC of Analog Integrated Circuits is to improve the electromagnetic immunity of considered analog integrated circuits, so that they start to fail at relevantly higher conduction levels than before.
Download or read book Analog IC Design Techniques for Nanopower Biomedical Signal Processing written by Chutham Sawigun and published by River Publishers. This book was released on 2016-05-31 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the requirements for low power consumption and very small physical dimensions in portable, wearable and implantable medical devices are calling for integrated circuit design techniques using MOSFETs operating in the subthreshold regime, this book first revisits some well-known circuit techniques that use CMOS devices biased in subthreshold in order to establish nanopower integrated circuit designs. Based on the these findings, this book shows the development of a class-AB current-mode sample-and-hold circuit with an order of magnitude improvement in its figure of merit compared to other state-of-the-art designs. Also, the concepts and design procedures of 1) single-branch filters 2) follower-integrator-based lowpass filters and 3) modular transconductance reduction techniques for very low frequency filters are presented. Finally, to serve the requirement of a very large signal swing in an energy-based action potential detector, a nanopower class-AB current-mode analog multiplier is designed to handle input current amplitudes of more than 10 times the bias current of the multiplier circuit. The invented filter circuits have been fabricated in a standard 0.18 µ CMOS process in order to verify our circuit concepts and design procedures. Their experimental results are reported.
Download or read book Signal Processing and Analysis of Electrical Circuit written by Adam Glowacz and published by MDPI. This book was released on 2020-03-13 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Download or read book ANALOG MOS INTEGRATED CIRCUITS FOR SIGNAL PROCESSING written by Roubik Gregorian and published by . This book was released on 2008-09-01 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Engineers· Managers· Technicians About The Book: The book describes the operating principles of analog MOS integrated circuits and how to design and use such circuits. The initial section explores general properties of analog MOS integrated circuits and the math and physics background required. The remainder of the book is devoted to the design of circuits. It includes such devices as switched-capacitor filters, analog-to-digital and digital-to-analog converters, amplifiers, modulators, oscillators, and others. Tables and numerical design examples clarify the step-by-step processes involved. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book Precision Instrumentation Amplifiers and Read Out Integrated Circuits written by Rong Wu and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative solutions in the design of precision instrumentation amplifier and read-out ICs, which can be used to boost millivolt-level signals transmitted by modern sensors, to levels compatible with the input ranges of typical Analog-to-Digital Converters (ADCs). The discussion includes the theory, design and realization of interface electronics for bridge transducers and thermocouples. It describes the use of power efficient techniques to mitigate low frequency errors, resulting in interface electronics with high accuracy, low noise and low drift. Since this book is mainly about techniques for eliminating low frequency errors, it describes the nature of these errors and the associated dynamic offset cancellation techniques used to mitigate them.
Download or read book Signal Processing and Integrated Circuits written by Hussein Baher and published by John Wiley & Sons. This book was released on 2012-03-06 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced account of analog, digital and mixed-mode signal processing with applications in telecommunications. Part I Perspective gives an overview of the areas of Systems on a Chip (Soc) and mobile communication which are used to demonstrate the complementary relationship between analog and digital systems. Part II Analog (continuous-time) and Digital Signal Processing contains both fundamental and advanced analysis, and design techniques, of analog and digital systems. This includes analog and digital filter design; fast Fourier transform (FFT) algorithms; stochastic signals; linear estimation and adaptive filters. Part III Analog MOS Integrated Circuits for Signal Processing covers basic MOS transistor operation and fabrication through to the design of complex integrated circuits such as high performance Op Amps, Operational Transconductance Amplifiers (OTA's) and Gm-C circuits. Part IV Switched-capacitor and Mixed-mode Signal Processing outlines the design of switched-capacitor filters, and concludes with sigma-delta data converters as an extensive application of analog and digital signal processing Contains the fundamentals and advanced techniques of continuous-time and discrete-time signal processing. Presents in detail the design of analog MOS integrated circuits for signal processing, with application to the design of switched-capacitor filters. Uses the comprehensive design of integrated sigma-delta data converters to illustrate and unify the techniques of signal processing. Includes solved examples, end of chapter problems and MATLAB® throughout the book, to help readers understand the mathematical complexities of signal processing. The treatment of the topic is at the senior undergraduate to graduate and professional levels, with sufficient introductory material for the book to be used as a self-contained reference.
Download or read book DSP Integrated Circuits written by Lars Wanhammar and published by . This book was released on 1999 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultra Low Power Integrated Circuit Design written by Nianxiong Nick Tan and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.
Download or read book Switched Current Signal Processing and A D Conversion Circuits written by Bengt E. Jonsson and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switched-Current Signal Processing and A/D Conversion Circuits: Design and Implementation describes the design and implementation of switched-current (SI) circuits with emphasis on signal processing and data-conversion applications. The work includes theoretical analysis, high-level and circuit-level simulation results as well as measurement results from a few of the author's circuit implementations. An extensive overview of the SI field of research is also given. The book contains an extensive overview of the switched-current field of research, and can therefore be used as a quick-reference to the field. The description of each design example has been organized to describe the entire design flow from system level design and simulation, to circuit simulation, layout and measurement as accurately as possible. Thus it is possible to follow each step in the design process. Switched-Current Signal Processing and A/D Conversion Circuits: Design and Implementation is an invaluable reference for researchers and circuit designers working with one-chip mixed-signal system solutions, and low-voltage analog CMOS design. It will also be appreciated by anyone requiring a quick overview of what has been done in the SI field.
Download or read book VLSI Digital Signal Processors written by Vijay Madisetti and published by Butterworth-Heinemann. This book was released on 1995 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only book that offers a thorough treatment of the following: design and application of programmable digital signal processors; formal specification and optimization of signal processing architectures and circuits; high-level synthesis of DSP architectures and datapaths; detailed treatment of application-specific integrated circuits (ASICs); scheduling, allocation and assignment algorithms for multiple processor DSP systems; and hardware/software co-design issues in DSP. VLSI Digital Signal Processors: An Introduction to Rapid Prototyping and Design Synthesis provides a cohesive, quantitative and clear exposition of the implementation and prototyping of digital signal processing algorithms on programmable signal processors, parallel processing systems and application-specific ICs. Included are both programmable and dedicated digital signal processors, and discussions of the latest optimization methods and the use of computer-aided-design techniques.
Download or read book VLSI Analog Signal Processing Circuits written by Hongjiang Song and published by Lulu.com. This book was released on 2014-02-14 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a collection of the past exams for the VLSI Analog Signal Processing Circuits class (EEE598) the author offered in the School of Engineering at Arizona State University. The topics cover various aspects of the design, analysis and application of VLSI analog signal processing circuits. This book is intended to be used together with the VLSI Analog Signal Processing Circuits textbook by the same author. It can also be used alone for the experienced readers.
Download or read book Analog Electronics written by David Crecraft and published by Elsevier. This book was released on 2002-05-21 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content has been carefully designed to meet the requirements of first and second year students of electronic engineering, communications engineering and telecommunications, following full honours degree programs or two-year courses including HNC/HND. - A completely new analog electronics textbook for the digital age - Coverage ideal for courses with a communications / wireless focus
Download or read book VLSI DIGITAL SIGNAL PROCESSING SYSTEMS DESIGN AND IMPLEMENTATION written by Keshab K. Parhi and published by John Wiley & Sons. This book was released on 2007 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Market_Desc: · Students in graduate level courses· Electrical Engineers· Computer Scientists· Computer Architecture Designers· Circuit Designers· Algorithm Designers· System Designers· Computer Programmers in the Multimedia and Wireless Communications Industries· VLSI System Designers Special Features: This example-packed resource provides invaluable professional training for a rapidly-expanding industry. · Presents a variety of approaches to analysis, estimation, and reduction of power consumption in order to help designers extend battery life.· Includes application-driven problems at the end of each chapter· Features six appendices covering shortest path algorithms used in retiming, scheduling, and allocation techniques, as well as determining the iteration bound· The Author is a recognized expert in the field, having written several books, taught several graduate-level classes, and served on several IEEE boards About The Book: This book complements the other Digital Signaling Processing books in our list, which include an introductory treatment (Marven), a comprehensive handbook (Mitra), a professional reference (Kaloupsidis), and others which pertain to a specific topic such as noise control. This graduate level textbook will fill an important niche in a rapidly expanding market.
Download or read book MOS Switched Capacitor and Continuous Time Integrated Circuits and Systems written by Rolf Unbehauen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present analysis and design principles, procedures and techniques of analog integrated circuits which are to be implemented in MOS (metal oxide semiconductor) technology. MOS technology is becoming dominant in the realization of digital systems, and its use for analog circuits opens new pos sibilities for the design of complex mixed analog/digital VLSI (very large scale in tegration) chips. Although we are focusing attention in this book principally on circuits and systems which can be implemented in CMOS technology, many con siderations and structures are of a general nature and can be adapted to other promising and emerging technologies, namely GaAs (Gallium Arsenide) and BI MOS (bipolar MOS, i. e. circuits which combine both bipolar and CMOS devices) technology. Moreover, some of the structures and circuits described in this book can also be useful without integration. In this book we describe two large classes of analog integrated circuits: • switched capacitor (SC) networks, • continuous-time CMOS (unswitched) circuits. SC networks are sampled-data systems in which electric charges are transferred from one point to another at regular discrete intervals of time and thus the signal samples are stored and processed. Other circuits belonging to this class of sampled-data systems are charge transfer devices (CTD) and charge coupled dev ices (CCD). In contrast to SC circuits, continuous-time CMOS circuits operate continuously in time. They can be considered as subcircuits or building blocks (e. g.
