Download or read book Short Run SPC for Manufacturing and Quality Professionals written by William A. Levinson and published by CRC Press. This book was released on 2022-09-07 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the manufacturing shop floor, the principle of "value comes from the production of parts rather than charts" crucially applies when using practical statistical process control (SPC). The production worker should need to enter only a sample’s measurements to get immediately actionable information as to whether corrective action (e.g., as defined by a control plan’s reaction plan) is necessary for an out-of-control situation, and should not have to perform any calculations, draw control charts, or use sophisticated statistical software. This book’s key benefit for readers consists of spreadsheet-deployable solutions with all the mathematical precision of a vernier along with the simplicity of a stone ax. Traditional SPC relies on the assumption that sufficient data are available with which to estimate the process parameters and set suitable control limits. Many practical applications involve, however, short production runs for which no process history is available. There are nonetheless tested and practical control methods such as PRE-Control and short-run SPC that use the product specifications to set appropriate limits. PRE-Control relies solely on the specification limits while short-run SPC starts with the assumption that the process is capable—that is, at least a 4-sigma process, and works from there to set control limits. Cumulative Sum (CUSUM) and exponentially weighted moving average (EWMA) charts also can be used for this purpose. Specialized charts can also track multiple part characteristics, and parts with different specifications, simultaneously. This is often useful, for example, where the same tool is engaged in mixed-model production. Readers will be able to deploy practical and simple control charts for production runs for which no prior history is available and control the processes until enough data accumulate to enable the traditional methods (assuming it ever does). They will be able to track multiple product features with different specifications and also control mixed-model applications in which a tool generates very short runs of parts with different specifications. The methods will not require software beyond readily available spreadsheets, nor will they require specialized tables that are not widely available. Process owners and quality engineers will be able to perform all supporting calculations in Microsoft Excel, and without the need for advanced software.

Download or read book Essential Statistical Concepts for the Quality Professional written by D. H. Stamatis and published by CRC Press. This book was released on 2012-05-02 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essence of any root cause analysis in our modern quality thinking is to go beyond the actual problem. This means not only do we have to fix the problem at hand but we also have to identify why the failure occurred and what was the opportunity to apply the appropriate knowledge to avoid the problem in the future. Essential Statistical Concepts f

Download or read book Innovative Control Charting written by Stephen A. Wise and published by Quality Press. This book was released on 2006-06-30 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for the quality professional with a basic understanding of traditional SPC, this book presents solutions for the problems encountered when trying to apply traditional control charting techniques in a complex manufacturing environment. Anyone using SPC who has felt limited by its traditional methods will find this book timely and beneficial. Along with basic SPC topics such as, control chart theories, process capability studies, data collection strategies, and sampling, this book concentrates on describing tools which solve the limitations of traditional SPC techniques. Specifically designed for those who face the challenges of limited data collection opportunities, small production runs, multiple characteristics, and demanding manufacturing situations, Innovative Control Charting will become a favorite, modern SPC reference. Benefits: Discover how SPC can be effectively applied even with complex parts, numerous part dimensions, similar but different characteristics, and small lot sizes. Learn how to overcome the three main limitations of traditional SPC techniques. Explore new SPC techniques in a step-by-step analysis approach using real-life examples.

Download or read book Statistical Process Control written by Robert James Oakland and published by Routledge. This book was released on 2018-10-08 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The business, commercial and public-sector world has changed dramatically since John Oakland wrote the first edition of Statistical Process Control – a practical guide in the mid-eighties. Then people were rediscovering statistical methods of ‘quality control’ and the book responded to an often desperate need to find out about the techniques and use them on data. Pressure over time from organizations supplying directly to the consumer, typically in the automotive and high technology sectors, forced those in charge of the supplying production and service operations to think more about preventing problems than how to find and fix them. Subsequent editions retained the ‘took kit’ approach of the first but included some of the ‘philosophy’ behind the techniques and their use. The theme which runs throughout the 7th edition is still processes - that require understanding, have variation, must be properly controlled, have a capability, and need improvement - the five sections of this new edition. SPC never has been and never will be simply a ‘took kit’ and in this book the authors provide, not only the instructional guide for the tools, but communicate the management practices which have become so vital to success in organizations throughout the world. The book is supported by the authors' extensive and latest consulting work within thousands of organisations worldwide. Fully updated to include real-life case studies, new research based on client work from an array of industries, and integration with the latest computer methods and Minitab software, the book also retains its valued textbook quality through clear learning objectives and end of chapter discussion questions. It can still serve as a textbook for both student and practicing engineers, scientists, technologists, managers and for anyone wishing to understand or implement modern statistical process control techniques.

Download or read book Introduction to Statistical Quality Control written by Douglas C. Montgomery and published by Wiley Global Education. This book was released on 2019-11-06 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once solely the domain of engineers, quality control has become a vital business operation used to increase productivity and secure competitive advantage. Introduction to Statistical Quality Control offers a detailed presentation of the modern statistical methods for quality control and improvement. Thorough coverage of statistical process control (SPC) demonstrates the efficacy of statistically-oriented experiments in the context of process characterization, optimization, and acceptance sampling, while examination of the implementation process provides context to real-world applications. Emphasis on Six Sigma DMAIC (Define, Measure, Analyze, Improve and Control) provides a strategic problem-solving framework that can be applied across a variety of disciplines. Adopting a balanced approach to traditional and modern methods, this text includes coverage of SQC techniques in both industrial and non-manufacturing settings, providing fundamental knowledge to students of engineering, statistics, business, and management sciences. A strong pedagogical toolset, including multiple practice problems, real-world data sets and examples, and incorporation of Minitab statistics software, provides students with a solid base of conceptual and practical knowledge.

Download or read book Statistical Process Control for Real World Applications written by William A. Levinson and published by CRC Press. This book was released on 2010-12-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The normal or bell curve distribution is far more common in statistics textbooks than it is in real factories, where processes follow non-normal and often highly skewed distributions. Statistical Process Control for Real-World Applications shows how to handle non-normal applications scientifically and explain the methodology to suppliers and custom

Download or read book Measuring Process Capability written by Davis R. Bothe and published by McGraw-Hill Companies. This book was released on 1997 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Quality Progress written by and published by . This book was released on 1993-07 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Managing Controlling and Improving Quality written by Douglas C. Montgomery and published by Wiley. This book was released on 2010-04-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an organized approach to quality management, control, and improvement. Because quality problems usually are the outcome of uncontrolled or excessive variability, statistical tools and other analytical methods play an important role in solving these problems. However, these techniques need to be implemented within a management structure that will ensure success. This text focuses on both the management structure and the statistical and analytical tools. It organizes and presents this material according to many years of teaching, research, and professional practice across a wide range of business and industrial settings.

Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.

Download or read book The Linton Recommended Training Suppliers Consultants Directory written by and published by . This book was released on 1996 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statistical Process Control for the Food Industry written by Sarina A. Lim and published by John Wiley & Sons. This book was released on 2019-02-25 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment for implementing Statistical Process Control (SPC) in the food industry This book provides managers, engineers, and practitioners with an overview of necessary and relevant tools of Statistical Process Control, a roadmap for their implementation, the importance of engagement and teamwork, SPC leadership, success factors of the readiness and implementation, and some of the key lessons learned from a number of food companies. Illustrated with numerous examples from global real-world case studies, this book demonstrates the power of various SPC tools in a comprehensive manner. The final part of the book highlights the critical challenges encountered while implementing SPC in the food industry globally. Statistical Process Control for the Food Industry: A Guide for Practitioners and Managers explores the opportunities to deliver customized SPC training programs for local food companies. It offers insightful chapter covering everything from the philosophy and fundamentals of quality control in the food industry all the way up to case studies of SPC application in the food industry on both the quality and safety aspect, making it an excellent "cookbook" for the managers in the food industry to assess and initiating the SPC application in their respective companies. Covers concise and clear guidelines for the application of SPC tools in any food companies' environment Provides appropriate guidelines showing the organizational readiness level before the food companies adopt SPC Explicitly comments on success factors, motivations, and challenges in the food industry Addresses quality and safety issues in the food industry Presents numerous, global, real-world case studies of SPC in the food industry Statistical Process Control for the Food Industry: A Guide for Practitioners and Managers can be used to train upper middle and senior managers in improving food quality and reducing food waste using SPC as one of the core techniques. It's also an excellent book for graduate students of food engineering, food quality management and/or food technology, and process management.

Download or read book Design for Six Sigma in Technology and Product Development written by Clyde M. Creveling and published by Prentice Hall Professional. This book was released on 2002-10-25 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses many new topical areas for the development of 6 Sigma performance. The text is structured to demonstrate how 6 Sigma methods can be used as a very powerful tool within System Engineering and integration evaluations to help enable the process of Critical Parameter Management. The case studies and examples used throughout the book come from recent successful applications of the material developed in the text.

Download or read book Why Things Go Wrong written by Gary Fellers and published by Pelican Publishing. This book was released on 2011-02-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simplifying complex business practices for application. An expert bridges the gap between learning business practices and implementing them with this compact volume of principles from W. Edwards Deming. The Deming system was the secret to Japan's economic miracle after World War II. Now the "14 Points for Managers" and "7 Deadly Diseases of Management" are explained without complicated mathematical formulae. Fellers' easy-to-read format makes this imporant resource accessible to everyone. Chapters on interdepartmental coordination and manager-employee relationships explain why some outdated forms of leadership fail and how to replace them with effective frontline management.

Download or read book Global Japanization written by Tony Elger and published by Routledge. This book was released on 2010-11-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global Japaniziation? Brings together research from North America, Japan, Europe and Latin America to analyse the influence of Japanese manufacturing investment and Japanese working practices across the global economy. The editors present original case studies of work reorganization and workers’ experiences within both Japanese companies and those of their competitors in diverse sectors and national settings. These studies provide a wide-ranging critique of conventional accounts of Japanese models of management and production, and their implications for employees. They offer new evidence and fresh perspectives on the role of "transplants" in disseminating manufacturing innovations, and on the responses of non-Japanese firm in reorganizing production operations and industrial relations.

Download or read book Advanced Product Quality Planning APQP and Control Plan written by and published by . This book was released on 1995 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Statistical Methods for Quality Improvement written by Thomas P. Ryan and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the Second Edition "As a comprehensive statistics reference book for quality improvement, it certainly is one of the best books available." —Technometrics This new edition continues to provide the most current, proven statistical methods for quality control and quality improvement The use of quantitative methods offers numerous benefits in the fields of industry and business, both through identifying existing trouble spots and alerting management and technical personnel to potential problems. Statistical Methods for Quality Improvement, Third Edition guides readers through a broad range of tools and techniques that make it possible to quickly identify and resolve both current and potential trouble spots within almost any manufacturing or nonmanufacturing process. The book provides detailed coverage of the application of control charts, while also exploring critical topics such as regression, design of experiments, and Taguchi methods. In this new edition, the author continues to explain how to combine the many statistical methods explored in the book in order to optimize quality control and improvement. The book has been thoroughly revised and updated to reflect the latest research and practices in statistical methods and quality control, and new features include: Updated coverage of control charts, with newly added tools The latest research on the monitoring of linear profiles and other types of profiles Sections on generalized likelihood ratio charts and the effects of parameter estimation on the properties of CUSUM and EWMA procedures New discussions on design of experiments that include conditional effects and fraction of design space plots New material on Lean Six Sigma and Six Sigma programs and training Incorporating the latest software applications, the author has added coverage on how to use Minitab software to obtain probability limits for attribute charts. new exercises have been added throughout the book, allowing readers to put the latest statistical methods into practice. Updated references are also provided, shedding light on the current literature and providing resources for further study of the topic. Statistical Methods for Quality Improvement, Third Edition is an excellent book for courses on quality control and design of experiments at the upper-undergraduate and graduate levels. the book also serves as a valuable reference for practicing statisticians, engineers, and physical scientists interested in statistical quality improvement.