Download or read book Shape Memory Alloys 2017 written by Takuo Sakon and published by MDPI. This book was released on 2018-03-15 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Shape Memory Alloys 2017" that was published in Metals
Download or read book Shape Memory Alloys 2017 written by Takuo Sakon and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloys 2017.
Download or read book Shape Memory Effects in Alloys written by Jeff Perkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Shape Memory Effects and Appli cations was held at the University of Toronto on May 19-20, 1975, in four sessions over two days, as part of the regular 1975 Spring Meeting of The Metallurgical Society of AlME, sponsored by the Physical Metallurgy Committee of The Metallurgical Society. This was the first symposium on the subject, the only previous meeting at all related being the 1968 NOL Symposium on TiNi and Associated Compounds. One of the major intentions of this Symposium was to provide a forum for cross-communication between workers in the diverse metallurgical areas pertinent to shape memory effects, areas such as martensitic transformation, crystallography and thermodynamics, mechanical behavior, stress-induced transformation, lattice sta bility, and alloy development. Authors were encouraged to place an emphasis on delineation of general controlling factors and mech anisms, and on comparison of shape memory effect alloy systems with systems not exhibiting SME.
Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Elsevier. This book was released on 2014-09-25 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models
Download or read book Advances in Shape Memory Materials written by Qingping Sun and published by Springer. This book was released on 2017-03-14 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the development of the shape memory materials and their applications. It covers many aspects of smart materials. It also describes the method on how we can obtain not only large recovery strains but also high recovery stress, energy storage and energy dissipation in applications. This volume treats the mechanical properties of shape memory alloys, shape memory polymers and the constitutive equations of the materials which are necessary to design the shape memory elements in applications. It also deals with the fatigue properties of materials, the method to design the shape memory elements, and the shape memory composites. The authors are international experts on shape memory alloys and shape memory polymers in the metallurgical, chemical, mechanical and engineering fields. The book will be of interest to graduate students, engineers, scientists and designers who are working in the field of electric and mechanical engineering, industries, medical engineering, aerospace engineering, robots, automatic machines, clothes and recycling for research, design and manufacturing.
Download or read book Shape Memory Alloys written by Vasiliy Buchelnikov and published by Materials Research Forum LLC. This book was released on 2018-12-05 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents selected, peer reviewed papers from the 3rd International Conference on “Shape Memory Alloys” (SMA 2018) Keywords: Shape Memory Alloys, Martensitic Transformations, Biocompatible Porous Materials, Ni-Mn Intermetallic Alloys, Superelastic Alloys, Ti-Ni Shape Memory Alloys, Novel Superelastic Ti-Zr-Based Alloys, Solid State Cooling, Pulsed Electron Beam Treatment, Surface Modification, Carbon Polytypes, Fluorographene, Diamond-Like Phase Transformations, Solid Oxide Fuel Cell, Multiferroics, Fe-Ga Phase Diagram, Fe-Ge Phase Diagram , Fe-Al Phase Diagram.
Download or read book Shape Memory and Superelastic Alloys written by K Yamauchi and published by Elsevier. This book was released on 2011-04-30 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory and superelastic alloys possess properties not present in ordinary metals meaning that they can be used for a variety of applications. Shape memory and superelastic alloys: Applications and technologies explores these applications discussing their key features and commercial performance. Readers will gain invaluable information and insight into the current and potential future applications of shape memory alloys.Part one covers the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics of Ti-Ni-based and Ti-Nb-based shape memory and superelastic (SM/SE) alloys, the development and commercialisation of TiNi and Cu-based alloys, industrial processing and device elements, design of SMA coil springs for actuators before a final overview on the development of SM and SE applications. Part two introduces SMA application technologies with chapters investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering before looking at the properties, processing and applications of Ferrous (Fe)-based SMAs. Part three focuses on the applications of superelastic alloys and explores their functions in the medical, telecommunications, clothing, sports and leisure industries. The appendix briefly describes the history and activity of the Association of Shape Memory Alloys (ASMA).With its distinguished editors and team of expert contributors, Shape memory and superelastic alloys: Applications and technologies is be a valuable reference tool for metallurgists as well as for designers, engineers and students involved in one of the many industries in which shape memory effect and superelasticity are used such as construction, automotive, medical, aerospace, telecommunications, water/heating, clothing, sports and leisure. Explores important applications of shape memory and superelastic alloys discussing their key features and commercial performance Assesses the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics Introduces SMA application technologies investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering
Download or read book Fabrication and Processing of Shape Memory Alloys written by Kush Mehta and published by Springer. This book was released on 2018-09-01 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book showcases different processes of fabrication and processing applied to shape memory alloys. It provides details and collective information on working principles, process mechanisms, salient features, novel aspects, process capabilities, properties of material and unique applications of shape memory alloys. The recent progress on fabrication and processing are specially addressed in this book. It covers major topics of manufacturing such as machining, joining, welding and processing of shape memory alloys.
Download or read book Shape Memory Alloys written by M. Fremond and published by Springer. This book was released on 2014-05-04 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of two chapters. The first chapter deals with the thermomechanical macroscopic theory describing the transformation and deformation behavior of shape memory alloys. The second chapter deals with the extensive and fundamental review of the experimental works which include crystallography, transformations and mechanical characteristics in Ti-Ni, Cu-base and ferrous shape memory alloys.
Download or read book Thin Film Shape Memory Alloys written by Shuichi Miyazaki and published by Cambridge University Press. This book was released on 2009-09-03 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first dedicated book describing the properties, preparation, characterization and device applications of TiNi-based shape memory alloys.
Download or read book Shape Memory Alloys written by A. Bhattacharyya and published by . This book was released on 2000 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Aspects of Shape Memory Alloys written by T W Duerig and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.
Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Butterworth-Heinemann. This book was released on 2021-01-13 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering: For Aerospace, Structural and Biomedical Applications, Second Edition embraces new advancements in materials, systems and applications introduced since the first edition. Readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams. Sections address modeling and design process aspects, explore recent applications, and discuss research activities aimed at making new devices for innovative implementations. The book discusses both the potential of these fascinating materials, their limitations in everyday life, and tactics on how to overcome some limitations in order to achieve proper design of useful SMA mechanisms. Provides a greatly expanded scope, looking at new applications of SMA devices and current research activities Covers all aspects of SMA technology - from a global state-of-the-art survey, to the classification of existing materials, basic material design, material manufacture, and from device engineering design to implementation within actual systems Presents the material within a modular architecture over different topics, from material conception to practical engineering realization
Download or read book Ni free Ti based Shape Memory Alloys written by Hee Young Kim and published by Butterworth-Heinemann. This book was released on 2018-09-17 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ni-free Ti-based Shape Memory Alloys reviews the fundamental issues of biomedical beta-type Ti base shape memory and superelastic alloys, including martensitic transformation, shape memory and superelastic properties, alloy development, thermomechanical treatment and microstructure control, and biocompatibility. Some unique properties, such as large nonlinear elastic behavior and low Young’s modulus, observed in metastable Ti alloys are discussed on the basis of phase stability. As it is expected that superelastic Ti alloys will further expand the applications of shape memory alloys within the biomedical field, this book provides a comprehensive review of these new findings in Ti-base shape memory and superelastic alloys. Includes coverage of phase transformations in titanium alloys Discusses mechanical properties and alloy development Presents a review of Ti-based shape alloys and their applications
Download or read book Shape Memory Alloys for Seismic Resilience written by Cheng Fang and published by Springer. This book was released on 2019-05-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to the fundamental properties and practical applications of shape memory alloys (SMAs) from the perspective of seismic engineering. It objectively discusses the superiority of this novel class of materials, which could potentially overcome the limitations of conventional seismic control technologies. The results, vividly presented in the form of tables and figures, are demonstrated with rigorous experimental verifications, supplemented by comprehensive numerical and analytical investigations. The book allows readers to gain an in-depth understanding of the working mechanisms of various SMA-based structural devices and members, including beam-to-column connections, dampers, and braces, while also providing them with a broader vision of next-generation, performance-based seismic design for novel adaptive structural systems. Helping to bridge the gap between material science and structural engineering, it also sheds light on the potential of commercializing SMA products in the construction industry. The cutting-edge research highlighted here provides technical incentives for design professionals, contractors, and building officials to use high-performance and smart materials in structural design, helping them stay at the forefront of construction technology.
Download or read book Magnetism and Structure in Functional Materials written by Antoni Planes and published by Springer Science & Business Media. This book was released on 2010-02-11 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetism and Structure in Functional Materials addresses three distinct but related topics: (i) magnetoelastic materials such as magnetic martensites and magnetic shape memory alloys, (ii) the magnetocaloric effect related to magnetostructural transitions, and (iii) colossal magnetoresistance (CMR) and related manganites. The goal is to identify common underlying principles in these classes of materials that are relevant for optimizing various functionalities. The emergence of apparently different magnetic/structural phenomena in disparate classes of materials clearly points to a need for common concepts in order to achieve a broader understanding of the interplay between magnetism and structure in this general class of new functional materials exhibiting ever more complex microstructure and function. The topic is interdisciplinary in nature and the contributors correspondingly include physicists, materials scientists and engineers. Likewise the book will appeal to scientists from all these areas.
Download or read book Shape Memory Alloys Properties Technologies Opportunities written by Natalia Resnina and published by Trans Tech Publications Ltd. This book was released on 2015-03-23 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collective monograph consists of five parts: Theory and modeling of martensitic transformation and functional properties; Martensitic transformations and shape memory effects; Controlling the functional properties of shape memory alloys; Shape memory alloys with complex structure; Application of shape memory alloys) covering of all aspects of shape memory alloys from theory and modelling to applications. It presents the scientific results obtained by leading scientific teams studying shape memory alloys in the former Soviet Republics together with their colleagues from other countries during the last decade.