Download or read book Shape Memory Alloy Rotary Actuator written by Rushabh Kothari (Mukesh) and published by . This book was released on 2003 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shape Memory Alloy Actuators written by Mohammad H. Elahinia and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic approach to realizing NiTi shape memory alloy actuation, and is aimed at science and engineering students who would like to develop a better understanding of the behaviors of SMAs, and learn to design, simulate, control, and fabricate these actuators in a systematic approach. Several innovative biomedical applications of SMAs are discussed. These include orthopedic, rehabilitation, assistive, cardiovascular, and surgery devices and tools. To this end unique actuation mechanisms are discussed. These include antagonistic bi-stable shape memory-superelastic actuation, shape memory spring actuation, and multi axial tension-torsion actuation. These actuation mechanisms open new possibilities for creating adaptive structures and biomedical devices by using SMAs.

Download or read book Shape Memory Alloy Rotary Actuator for CubeSat Deployable Structures written by Katherine Shisuka Chun and published by . This book was released on 2020 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small satellites have lowered the barrier to entry for space-bound science and technology demonstrations. However, the small form factor requires extremely low size, weight, and power for any on-board hardware. Precision actuation of deployable structures has previously been achievable only through low SWaP single-use actuators or motor-driven, high SWaP multiple-use actuators. The Folded Lightweight Actuated Positioning System has the potential to provide an ultra-lightweight multiple-use actuator by using a Joule-heated shape memory alloy-based hinge. The hinge uses two shape memory alloy strips which are trained in opposite directions and mounted into a rotary actuator. Two different shape memory alloy geometries are explored: a rectangular cross-section and a circular cross-section. The rectangular hinge actuates over a range of ±20° with an average power of 0.14 W. The circular hinge actuates over a range of ±23° with an average power of 0.073 W. A closed-loop controller uses pulse width modulation and encoder measurements to actuate the rectangular hinge to within 2∘ of the desired angle.

Download or read book Design of Shape Memory Alloy SMA Actuators written by Ashwin Rao and published by Springer. This book was released on 2015-05-08 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short monograph presents an analysis and design methodology for shape memory alloy (SMA) components such as wires, beams, and springs for different applications. The solid-solid, diffusionless phase transformations in thermally responsive SMA allows them to demonstrate unique characteristics like superelasticity and shape memory effects. The combined sensing and actuating capabilities of such materials allows them to provide a system level response by combining multiple functions in a single material system. In SMA, the combined mechanical and thermal loading effects influence the functionality of such materials. The aim of this book is to make the analysis of these materials accessible to designers by developing a "strength of materials" approach to the analysis and design of such SMA components inspired from their various applications with a review of various factors influencing the design process for such materials.

Download or read book Design Construction and Analysis of a 2 degree of freedom Shape Memory Alloy Rotary Actuator written by Nathan Allen Howard and published by . This book was released on 2000 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Analysis and Control of a Nitinol Shape Memory Alloy Rotary Actuator for Spacecraft Deployable Structures written by Mario Melendrez Contreras and published by . This book was released on 2019 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small satellites known as CubeSats are becoming more and more popular in the aerospace industry and in academia. The new availability of rockets such as SpaceX's Falcon 9 or even dedicated CubeSat rockets such as Rocket Lab's Electron rocket have provided a new opportunity for many organizations to launch satellites. Depending on the goals of each satellite, they can be configured with many different payloads and mechanisms. Solar panels are one of the most common payloads on CubeSats but are mostly spring-actuated, meaning they cannot be deployed to precise angles. Shape memory alloys have been used to create rotary mechanisms in the past but closed loop control of shape memory alloys in a bending architecture is relatively novel. A rotary shape memory alloy actuator was designed with the use case of precisely pointing solar panels to maximize energy collection. Here we show identification of a system transfer function through multiple step responses and the use of a closed-loop PID control to achieve rise times of about 15 seconds with overshoot errors of 2 to 8 degrees. The experiments also showed the possibility of achieving rapid rise times of less than 2 seconds and accuracy within 2 degrees with some slight changes to the control system. This actuator prototype further develops the possibilities of precision angular actuation in a lightweight, robust, low volume, low power, and simple mechanical system.

Download or read book A New Rotary Shape Memory Alloy Actuator written by Hamid Dehestani and published by . This book was released on 1999 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.

Download or read book New Advances in Mechanisms Mechanical Transmissions and Robotics written by Burkhard Corves and published by Springer. This book was released on 2016-09-30 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the proceedings of the Joint International Conference of the XII International Conference on Mechanisms and Mechanical Transmissions (MTM) and the XXIII International Conference on Robotics (Robotics ’16), that was held in Aachen, Germany, October 26th-27th, 2016. It contains applications of mechanisms and transmissions in several modern technical fields such as mechatronics, biomechanics, machines, micromachines, robotics and apparatus. In connection with these fields, the work combines the theoretical results with experimental testing. The book presents reviewed papers developed by researchers specialized in mechanisms analysis and synthesis, dynamics of mechanisms and machines, mechanical transmissions, biomechanics, precision mechanics, mechatronics, micromechanisms and microactuators, computational and experimental methods, CAD in mechanism and machine design, mechanical design of robot architecture, parallel robots, mobile robots, micro and nano robots, sensors and actuators in robotics, intelligent control systems, biomedical engineering, teleoperation, haptics, and virtual reality.

Download or read book Shape Memory Alloy Valves written by Alexander Czechowicz and published by Springer. This book was released on 2015-09-07 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces shape memory alloy technology with a specific focus on valve applications. The authors describe application characteristics as well the current and potential uses of this technology. They include an overview of thermal and electrical valves as well as detailed valve design strategies.

Download or read book Shape Memory Microactuators written by Manfred Kohl and published by Springer. This book was released on 2010-12-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of recent achievements, describing the microactuator development of microvalves and liner actuators comprehensively from concept through prototype. Further key aspects included are three-dimensional models for handling complex SMA actuator geometries and coupled simulation routines that take multifunctional properties into account. Mechanical and thermal optimization criteria are introduced for actuator design, allowing an optimum use of the shape memory effect. It is shown that some of the prototypes presented, e.g. SMA microgrippers, already outperform conventional components.

Download or read book A Rotary Shape Memory Alloy Actuator for CubeSat Deployable Structures written by Maxim O. Khatsenko and published by . This book was released on 2017 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over a decade of continuing CubeSat technology improvements are driving the wide adoption of CubeSats for research and commercial missions. Resource constraints onboard CubeSats still limit their ability to support multi-use actuators, but there is a need for a rotary CubeSat actuator that can be actively commanded to different angles. This type of actuator can be implemented in a CubeSat mechanism for differential drag management, increased power generation, and reconfigurable deployable structures. We propose using a shape memory alloy (SMA) actuator to meet this need. A SMA can be annealed at high temperatures to remember a trained shape. Upon cool down, the SMA element transforms to the martensite phase and is easily deformed. When the element is heated above the transformation temperature it transforms to the stiff austenite phase and assumes its remembered shape, driving the mechanism. Two SMA actuators are trained to different shapes and provide bidirectional rotary motion for use as a space mechanism. The actuators are designed by implementing kinematic, thermal, and bending models to size the SMA element. The models also predict the performance, size, weight, and power of the actuator and ensure it can operate in the CubeSat environment. Then, a prototype of the proposed actuator is manufactured, assembled, and ground tested. Testing is used to validate the models and verify the requirements necessary to operate onboard a CubeSat. The prototype meets all requirements and offers a reduced mass, volume, and complexity alternative to current CubeSat electromagnetic actuators. Future work is necessary to improve the mechanical performance and positional control of the SMA actuator.

Download or read book The Development of a Monolithic Shape Memory Alloy Actuator electronic Resource written by Toews, Leslie Marilyn and published by University of Waterloo. This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory alloys (SMAs) provide exciting opportunities for miniature actuation systems. As SMA actuators are scaled down in size, cooling increases and bandwidth, improves. However, the inclusion of a bias element with which to cycle the SMA actuator becomes difficult at very small scales. One technique used to avoid the necessity of having to include a separate bias element is the use of local annealing to fabricate a monolithic device out of nickel titanium (NiTi). The actuator geometry is machined out of a single piece of non-annealed NiTi. After locally annealing a portion of the complete device, that section exhibits the shape memory effect while the remainder acts as structural support and provides the bias force required for cycling. This work proposes one such locally-annealed monolithic SMA actuator for future incorporation in a device that navigates the digestive tract. After detailing the derivation of lumped electro-mechanical models for the actuator, a description of the prototyping procedure, including fabrication and local annealing of the actuator, is provided. This thesis presents the experimental prototype actuator behaviour and compares it with simulations generated using the developed models.

Download or read book The Modeling and Controlling of Shape Memory Alloy Actuator written by David Arifin and published by . This book was released on 1989 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shape Memory Alloy Actuators written by Burcu Dönmez and published by . This book was released on 2011-11 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sectionally Heated Shape Memory Alloy Actuator for Multiple Position Aircraft Roll Control written by Joshua Bernath Frommer and published by . This book was released on 2002 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Development of Titanium Nickel Shape Memory Alloy Devices written by Erik Rashaun James and published by . This book was released on 2007 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adapts shape memory alloys (SMA)s into actuator designs and develops related active devices. Focuses on rotary motion systems and creating crawling, biologically inspired, simulated inchworms. Investigates the electromechanical characteristics of these devices and seeks to develop a functional biologically inspired SMA electric motor.