Download or read book Structural Sensitivity Analysis and Optimization 1 written by Kyung K. Choi and published by Springer Science & Business Media. This book was released on 2006-12-30 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive numerical methods for computing design sensitivity are included in the text for practical application and software development. The numerical method allows integration of CAD-FEA-DSA software tools, so that design optimization can be carried out using CAD geometric models instead of FEA models. This capability allows integration of CAD-CAE-CAM so that optimized designs can be manufactured effectively.

Download or read book Structural Sensitivity Analysis and Optimization 2 written by K. K. Choi and published by Springer Science & Business Media. This book was released on 2006-12-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive numerical methods for computing design sensitivity are included in the text for practical application and software development. The numerical method allows integration of CAD-FEA-DSA software tools, so that design optimization can be carried out using CAD geometric models instead of FEA models. This capability allows integration of CAD-CAE-CAM so that optimized designs can be manufactured effectively.

Download or read book Design Sensitivity Analysis of Structural Systems written by Vadim Komkov and published by Academic Press. This book was released on 1986-05-01 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is organized into four chapters. The first three treat distinct types of design variables, and the fourth presents a built-up structure formulation that combines the other three. The first chapter treats finite-dimensional problems, in which the state variable is a finite-dimensional vector of structure displacements and the design parameters. The structual state equations are matrix equations for static response, vibration, and buckling of structures and matrix differential equations for transient dynamic response of structures, which design variables appearing in the coefficient matrices.

Download or read book Advances in Structural Optimization written by J. Herskovits and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Structural Optimization presents the techniques for a wide set of applications, ranging from the problems of size and shape optimization (historically the first to be studied) to topology and material optimization. Structural models are considered that use both discrete and finite elements. Structural materials can be classical or new. Emerging methods are also addressed, such as automatic differentiation, intelligent structures optimization, integration of structural optimization in concurrent engineering environments, and multidisciplinary optimization. For researchers and designers in industries such as aerospace, automotive, mechanical, civil, nuclear, naval and offshore. A reference book for advanced undergraduate or graduate courses on structural optimization and optimum design.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boundary Element Advances in Solid Mechanics written by Dimitri Beskos and published by Springer. This book was released on 2014-05-04 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents and discusses recent advances in boundary element methods and their solid mechanics applications. It illustrates these methods in their latest forms, developed during the last five to ten years, and demonstrates their advantages in solving a wide range of solid mechanics problems.

Download or read book The Optimum Shape written by James Bennett and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at the International Symposium, "The Optimum Shape: Automated Structural Design," held at the General Motors Research Laboratories on September 3D-October 1, 1985. This was the 30th symposium in a series which the Research Laboratories began sponsoring in 1957. Each symposium has focused on a topic that is both under active study at the Research Laboratories and is also of interest to the larger technical community. While attempts to produce a structure which performs a certain task with the minimum amount of resources probably predates recorded civilization, the idea of coupling formal optimization techniques with computer-based structural analysis techniques was first proposed in the early 1960s. Although it was recognized at this time that the most fundamental description of the problem would be in terms of the shape or contours of the structure, much of the early work described the problem in terms of structural sizing parameters instead of geometrical descriptions. Within the past few years, several research groups have started to explore this more fundamental area of shape design. Initial research has raised many new questions about appropriate selection of design variables, methods of calculating derivatives, and generation of the underlying analysis problem.

Download or read book Meshless Methods in Solid Mechanics written by Youping Chen and published by Springer Science & Business Media. This book was released on 2006-12-31 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of continuum mechanics, the integral formulation methods of continuum problems, the basic concepts of finite element methods, and the methodologies, formulations, procedures, and applications of various meshless methods. It also provides general and detailed procedures of meshless analysis on elastostatics, elastodynamics, non-local continuum mechanics and plasticity with a large number of numerical examples. Some basic and important mathematical methods are included in the Appendixes. For readers who want to gain knowledge through hands-on experience, the meshless programs for elastostatics and elastodynamics are provided on an included disc.

Download or read book Shapes and Geometries written by Michel C. Delfour and published by SIAM. This book was released on 2001-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools to use for problems where the modeling, optimization, or control variable is the structure of a geometric object.

Download or read book Concurrent Engineering Tools and Technologies for Mechanical System Design written by Edward J. Haug and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain lectures presented at the NATO Advanced Study Institute on Concurrent Engineering Tools and Technologies for Mechanical System Design held in Iowa City, Iowa, 25 May -5 June, 1992. Lectures were presented by leaders from Europe and North America in disciplines contributing to the emerging international focus on Concurrent Engineering of mechanical systems. Participants in the Institute were specialists from throughout NATO in disciplines constituting Concurrent Engineering, many of whom presented contributed papers during the Institute and all of whom participated actively in discussions on technical aspects of the subject. The proceedings are organized into the following five parts: Part 1 Basic Concepts and Methods Part 2 Application Sectors Part 3 Manufacturing Part 4 Design Sensitivity Analysis and Optimization Part 5 Virtual Prototyping and Human Factors Each of the parts is comprised of papers that present state-of-the-art concepts and methods in fields contributing to Concurrent Engineering of mechanical systems. The lead-off papers in each part are based on invited lectures, followed by papers based on contributed presentations made by participants in the Institute.

Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety and performance concept Reliability assessment of concrete structures written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures have been built for more than 100 years. At first, reinforced concrete was used for buildings and bridges, even for those with large spans. Lack of methods for structural analysis led to conservative and reliable design. Application of prestressed concrete started in the 40s and strongly developed in the 60s. The spans of bridges and other structures like halls, industrial structures, stands, etc. grew significantly larger. At that time, the knowledge of material behaviour, durability and overall structural performance was substantially less developed than it is today. In many countries statically determined systems with a fragile behavior were designed for cast in situ as well as precast structures. Lack of redundancy resulted in a low level of robustness in structural systems. In addition, the technical level of individual technologies (e.g. grouting of prestressed cables) was lower than it is today. The number of concrete structures, including prestressed ones, is extremely high. Over time and with increased loading, the necessity of maintaining safety and performance parameters is impossible without careful maintenance, smaller interventions, strengthening and even larger reconstructions. Although some claim that unsatisfactory structures should be replaced by new ones, it is often impossible, as authorities, in general, have only limited resources. Most structures have to remain in service, probably even longer than initially expected. In order to keep the existing concrete structures in an acceptable condition, the development of methods for monitoring, inspection and assessment, structural identification, nonlinear analysis, life cycle evaluation and safety and prediction of the future behaviour, etc. is necessary. The scatter of individual input parameters must be considered as a whole. This requires probabilistic approaches to individual partial problems and to the overall analysis. The members of the fib Task Group 2.8 “Safety and performance concepts” wrote, on the basis of the actual knowledge and experience, a comprehensive document that provides crucial knowledge for existing structures, which is also applicable to new structures. This guide to good practice is divided into 10 basic chapters dealing with individual issues that are critical for activities associated with preferably existing concrete structures. Bulletin 86 starts with the specification of the performance-based requirements during the entire lifecycle. The risk issues are described in chapter two. An extensive part is devoted to structural reliability, including practical engineering approaches and reliability assessment of existing structures. Safety concepts for design consider the lifetime of structures and summarise safety formats from simple partial safety factors to develop approaches suitable for application in sophisticated, probabilistic, non-linear analyses. Testing for design and the determination of design values from the tests is an extremely important issue. This is especially true for the evaluation of existing structures. Inspection and monitoring of existing structures are essential for maintenance, for the prediction of remaining service life and for the planning of interventions. Chapter nine presents probabilistically-based models for material degradation processes. Finally, case studies are presented in chapter ten. The results of the concrete structures monitoring as well as their application for assessment and prediction of their future behaviour are shown. The risk analysis of highway bridges was based on extensive monitoring and numerical evaluation programs. Case studies perfectly illustrate the application of the methods presented in the Bulletin. The information provided in this guide is very useful for practitioners and scientists. It provides the reader with general procedures, from the specification of requirements, monitoring, assessment to the prediction of the structures’ lifecycles. However, one must have a sufficiently large amount of experimental and other data (e.g. construction experience) in order to use these methods correctly. This data finally allows for a statistical evaluation. As it is shown in case studies, extensive monitoring programs are necessary. The publication of this guide and other documents developed within the fib will hopefully help convince the authorities responsible for safe and fluent traffic on bridges and other structures that the costs spent in monitoring are first rather small, and second, they will repay in the form of a serious assessment providing necessary information for decision about maintenance and future of important structures.

Download or read book Shapes and Geometries written by M. C. Delfour and published by SIAM. This book was released on 2011-01-01 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This considerably enriched new edition provides a self-contained presentation of the mathematical foundations, constructions, and tools necessary for studying problems where the modeling, optimization, or control variable is the shape or the structure of a geometric object.

Download or read book Modeling and Control in Solid Mechanics written by A.M. Khludnev and published by Birkhäuser. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: New trends in free boundary problems and new mathematical tools together with broadening areas of applications have led to attempts at presenting the state of art of the field in a unified way. In this monograph we focus on formal models representing contact problems for elastic and elastoplastic plates and shells. New approaches open up new fields for research. For example, in crack theory a systematic treatment of mathematical modelling and optimization of problems with cracks is required. Similarly, sensitivity analysis of solutions to problems subjected to perturbations, which forms an important part of the problem solving process, is the source of many open questions. Two aspects of sensitivity analysis, namely the behaviour of solutions under deformations of the domain of integration and perturbations of surfaces seem to be particularly demanding in this context. On writing this book we aimed at providing the reader with a self-contained study of the mathematical modelling in mechanics. Much attention is given to modelling of typical constructions applied in many different areas. Plates and shallow shells which are widely used in the aerospace industry provide good exam ples. Allied optimization problems consist in finding the constructions which are of maximal strength (endurance) and satisfy some other requirements, ego weight limitations. Mathematical modelling of plates and shells always requires a reasonable compromise between two principal needs. One of them is the accuracy of the de scription of a physical phenomenon (as required by the principles of mechanics).

Download or read book Modelling and Control in Solid Mechanics written by A.M. Khludnev and published by Springer Science & Business Media. This book was released on 1997-01-21 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the boundary value problems for a wide range of mathematical models of the mechanics of deformable bodies, in particular, the boundary value problems concerning plates and shells, crack theory, and elastoplastic bodies. An essential feature of the discussed boundary value problems is the availability of the inequality type constraints imposed on solutions such as the impenetration condition for contact problems, the yield plasticity condition, etc. As a consequence, the presence of free boundaries is typical of the boundary value problems concerned. The objective of the book is to display some new methods of analyzing such problems, as well as to perform research on new models evolved from engineering practice. Readers will find a variety of new mathematical models describing some contact problems for plates and shells, an equilibrium of plates involving cracks, etc. Furthermore, some new mathematical methods are presented which were specially developed by the authors to study the problems concerned. These help to convey a comprehensive picture of the present state of mathematical problems on the free-boundary elasticity and plasticity theory. The book is intended for postgraduates, scientists and engineers.and for Students interested in problems of modelling and optimal control in the mechanics of deformable bodies.

Download or read book Control of Distributed Parameter Systems 1989 written by M. Amouroux and published by Elsevier. This book was released on 2014-06-28 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents state-of-the-art reports on the theory, and current and future applications of control of distributed parameter systems. The papers cover the progress not only in traditional methodology and pure research in control theory, but also the rapid growth of its importance for different applications. This title will be of interest to researchers working in the areas of mathematics, automatic control, computer science and engineering.

Download or read book Computer Aided Optimal Design Structural and Mechanical Systems written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the edited version of lectures and selected papers presented at the NATO ADVANCED STUDY INSTITUTE ON COMPUTER AIDED OPTIMAL DESIGN: Structural and Mechanical Systems, held in Tr6ia, Portugal, 29th June to 11th July 1986, and organized by CEMUL -Center of Mechanics and Materials of the Technical University of Lisbon. The Institute was attended by 120 participants from 21 countries, including leading scientists and engineers from universities, research institutions and industry, and Ph.D. students. Some participants presented invited and contributed papers during the Institute and almost all participated actively in discussions on scientific aspects during the Institute. The Advanced Study Institute provided a forum for interaction among eminent scientists and engineers from different schools of thought and young reseachers. The Institute addressed the foundations and current state of the art of essential techniques related to computer aided optimal design of structural and mechanical systems, namely: Vari ational and Finite Element Methods in Optimal Design, Numerical Optimization Techniques, Design Sensitivity Analysis, Shape Optimal Design, Adaptive Finite Element Methods in Shape Optimization, CAD Technology, Software Development Techniques, Integrated Computer Aided Design and Knowledge Based Systems. Special topics of growing importance were also pre sented.