Download or read book John Deere Two Cylinder Collectibles Collector s Reference Guide written by Greg Stephen and published by . This book was released on with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two classic love stories in a keepsake edition that will heat up your winter! The Winter Soldier Everyone in Jacobsville, Texas, steered clear of taciturn Cy Parks-everyone but the spirited Lisa Monroe, who electrified the formidable loner with her tantalizing kisses. Their fiery passion escalated when the soldier returned from the line of duty-and claimed Lisa as his bride, to shield her from a revenge-seeking desperado. Clearly Cy was getting mighty possessive of this enchanting woman who needed the type of safeguarding only he could provide. But who would protect the beguiling bride from him...' Cattleman's Pride He was strong, seductive and set in his ways. She was shy, unassuming and achingly innocent. Yet when Jordan made it his personal crusade to help Libby hold on to her beloved homestead, everyone in Jacobsville knew it was just a matter of time before wedding bells chimed. But a cattleman's pride was a force to be reckoned with. Could Libby accomplish what no woman had before and tame this Long, Tall Texan's restless heart?

Download or read book Prairie Farmer written by and published by . This book was released on 1984 with total page 2198 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Commercial Motor written by and published by . This book was released on 1978-05 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heavy Wheel Vehicle Mechanic written by United States. Department of the Army and published by . This book was released on 1980 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 7th International Munich Chassis Symposium 2016 written by Prof. Dr. Peter E. Pfeffer and published by Springer. This book was released on 2016-08-15 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: In chassis development, the three aspects of safety, vehicle dynamics and ride comfort are at the top of the list of challenges to be faced. Addressing this triad of challenges becomes even more complex when the chassis is required to interact with assistance systems and other systems for fully automated driving. What is more, new demands are created by the introduction of modern electric and electronic architectures. All these requirements must be met by the chassis, together with its subsystems, the steering, brakes, tires and wheels. At the same time, all physical relationships and interactions have to be taken into account.

Download or read book Lake and Reservoir Restoration written by G. Dennis Cooke and published by Elsevier. This book was released on 2013-10-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lake and Reservoir Restoration deals with the eutrophication process and the methods to protect, restore, and manage lakes and reservoirs. The most common in-lake techniques or procedures, plus nutrient diversion, are reviewed with regard to their scientific basis, methods of application, known effectiveness, feasibility, drawbacks, and costs. Areas for further research and development are also highlighted. This book is comprised of 16 chapters organized into four sections. After an introduction to the theory of the problem and the restoration technique, the discussion turns to the various restoration methods such as those used for physical and chemical control of nutrients. Diversion and advanced waste treatment, hypolimnetic withdrawal, and dilution and flushing are considered along with phosphorus precipitation and inactivation, sediment oxidation, sediment removal, and hypolimnetic aeration. Case studies and success stories are presented and the costs and potential negative impacts of the methods are examined. The following chapters focus on methods to control plant biomass, including artificial circulation, water-level drawdown, harvesting, biological control, and surface and sediment covers. A chapter on liming acidified lakes concludes this text. This monograph will be useful to professional limnologists and engineers, on-site lake or reservoir managers, and those who are interested in learning about the problems and management of lakes and reservoirs.

Download or read book Fundamentals of Tractor Design written by Karl Theodor Renius and published by Springer Nature. This book was released on 2019-10-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a comprehensive review of tractor design fundamentals. Discussing more than hundred problems and including about six hundred international references, it offers a unique resource to advanced undergraduate and graduate students, researchers and also practical engineers, managers, test engineers, consultants and even old-timer fans. Tractors are the most important pieces of agricultural mechanization, hence a key factor of feeding the world. In order to address the educational needs of both less and more developed countries, the author included fundamentals of simple but proved designs for tractors with moderate technical levels, along with extensive information concerning modern, premium tractors. The broad technical content has been structured according to five technology levels, addressing all components. Relevant ISO standards are considered in all chapters. The book covers historical highlights, tractor project management (including cost management), traction mechanics, tires (including inflation control), belt ground drives, and ride dynamics. Further topics are: chassis design, diesel engines (with emission limits and installation instructions), all important types of transmissions, topics in machine element design, and human factors (health, safety, comfort). Moreover, the content covers tractor-implement management systems, in particular ISOBUS automation and hydraulic systems. Cumulative damage fundamentals and tractor load spectra are described and implemented for dimensioning and design verification. Fundamentals of energy efficiency are discussed for single tractor components and solutions to reduce the tractor CO2 footprint are suggested.

Download or read book Waste Management for the Food Industries written by Ioannis S. Arvanitoyannis and published by Academic Press. This book was released on 2010-07-28 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuously increasing human population, has resulted in a huge demand for processed and packaged foods. As a result of this demand, large amounts of water, air, electricity and fuel are consumed on a daily basis for food processing, transportation and preservation purposes. Although not one of the most heavily polluting, the food industry does contribute to the increase in volume of waste produced as well as to the energy expended to do so. For the first time, nine separate food industry categories are thoroughly investigated in Waste Management for the Food Industries in an effort to help combat this already acute problem. The current state of environmental management systems is described, offering comparisons of global legislation rarely found in other resources. An extensive review of commercial equipment, including advantages and disadvantages per employed waste management technique, offers a unique perspective for any academic, student, professional, and/or consultant in the food, agriculture and environmental industries. - Thoroughly examines the most prevalent and most polluting industries such as Meat, Fish, Dairy, Olive Oil, Juice and Wine industries - Includes synoptical tables [methods employed, physicochemical or microbiological parameters altered after treatment etc] and comparative figures of the effectiveness of various waste management methods - Contains nearly 2500 of the most up-to-date references available

Download or read book Annual Energy Outlook 2016 With Projections to 2040 written by Energy Dept., Energy Information Administration and published by Government Printing Office. This book was released on 2017-02-15 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Annual Energy Outlook 2016 presents long-term projections of energy supply, demand, and prices through 2040. The projections, focused on U.S. energy markets, are based on results from EIA's National Energy Modeling System which enables EIA to make projections under alternative, internally consistent sets of assumptions.

Download or read book Decision Maker s Guide to Solid Waste Management written by Philip R. O'Leary and published by DIANE Publishing. This book was released on 1999-02 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guide has been developed particularly for solid waste management practitioners, such as local government officials, facility owners and operators, consultants, and regulatory agency specialists. Contains technical and economic information to help these practitioners meet the daily challenges of planning, managing, and operating municipal solid waste (MSW) programs and facilities. The Guide's primary goals are to encourage reduction of waste at the source and to foster implementation of integrated solid waste management systems that are cost-effective and protect human health and the environment. Illustrated.

Download or read book Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials written by Ubaidillah Sabino and published by Springer Nature. This book was released on 2020-06-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2019), held on 16–17 October 2019 in Surakarta, Indonesia. It focuses on two relatively broad areas – advanced materials and sustainable energy – and a diverse range of subtopics: Advanced Materials and Related Technologies: Liquid Crystals, Semiconductors, Superconductors, Optics, Lasers, Sensors, Mesoporous Materials, Nanomaterials, Smart Ferrous Materials, Amorphous Materials, Crystalline Materials, Biomaterials, Metamaterials, Composites, Polymers, Design, Analysis, Development, Manufacturing, Processing and Testing for Advanced Materials. Sustainable Energy and Related Technologies: Energy Management, Storage, Conservation, Industrial Energy Efficiency, Energy-Efficient Buildings, Energy-Efficient Traffic Systems, Energy Distribution, Energy Modeling, Hybrid and Integrated Energy Systems, Fossil Energy, Nuclear Energy, Bioenergy, Biogas, Biomass Geothermal Power, Non-Fossil Energies, Wind Energy, Hydropower, Solar Photovoltaic, Fuel Cells, Electrification, and Electrical Power Systems and Controls.

Download or read book Handbook 1910 written by John Crerar Library and published by . This book was released on 1910 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering Fundamentals An Introduction to Engineering SI Edition written by Saeed Moaveni and published by Cengage Learning. This book was released on 2011-01-01 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specifically designed as an introduction to the exciting world of engineering, ENGINEERING FUNDAMENTALS: AN INTRODUCTION TO ENGINEERING encourages students to become engineers and prepares them with a solid foundation in the fundamental principles and physical laws. The book begins with a discovery of what engineers do as well as an inside look into the various areas of specialization. An explanation on good study habits and what it takes to succeed is included as well as an introduction to design and problem solving, communication, and ethics. Once this foundation is established, the book moves on to the basic physical concepts and laws that students will encounter regularly. The framework of this text teaches students that engineers apply physical and chemical laws and principles as well as mathematics to design, test, and supervise the production of millions of parts, products, and services that people use every day. By gaining problem solving skills and an understanding of fundamental principles, students are on their way to becoming analytical, detail-oriented, and creative engineers. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Download or read book Mechanization for Rural Development written by Josef Kienzle and published by Food & Agriculture Organization of the UN (FAO). This book was released on 2013 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication gives a wide-ranging perspective on the present state of mechanization in the developing world, and, as such, constitutes a solid platform on which to build strategies for a sustainable future. Farm mechanization forms an integral plank in the implementation of sustainable crop production intensification methodologies and sustainable intensification necessarily means that the protection of natural resources and the production of ecosystem services go hand-in-hand with intensified production practices. This requires specific mechanization measures to allow crops to be established with minimum soil disturbance, to allow the soil to be protected under organic cover for as long as possible, and to establish crop rotations and associations to feed the soil and to exploit crop nutrients from various soil horizons. This work is the starting point to help the reader understand the complexities and requirements of the task ahead.

Download or read book Electric and Hybrid Vehicles written by Amir Khajepour and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level introductory book covering fundamental aspects, design and dynamics of electric and hybrid electric vehicles There is significant demand for an understanding of the fundamentals, technologies, and design of electric and hybrid electric vehicles and their components from researchers, engineers, and graduate students. Although there is a good body of work in the literature, there is still a great need for electric and hybrid vehicle teaching materials. Electric and Hybrid Vehicles: Technologies, Modeling and Control – A Mechatronic Approach is based on the authors’ current research in vehicle systems and will include chapters on vehicle propulsion systems, the fundamentals of vehicle dynamics, EV and HEV technologies, chassis systems, steering control systems, and state, parameter and force estimations. The book is highly illustrated, and examples will be given throughout the book based on real applications and challenges in the automotive industry. Designed to help a new generation of engineers needing to master the principles of and further advances in hybrid vehicle technology Includes examples of real applications and challenges in the automotive industry with problems and solutions Takes a mechatronics approach to the study of electric and hybrid electric vehicles, appealing to mechanical and electrical engineering interests Responds to the increase in demand of universities offering courses in newer electric vehicle technologies

Download or read book Techno Societal 2018 written by Prashant M. Pawar and published by Springer Nature. This book was released on 2019-11-06 with total page 968 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, divided in two volumes, originates from Techno-Societal 2018: the 2nd International Conference on Advanced Technologies for Societal Applications, Maharashtra, India, that brings together faculty members of various engineering colleges to solve Indian regional relevant problems under the guidance of eminent researchers from various reputed organizations. The focus is on technologies that help develop and improve society, in particular on issues such as the betterment of differently abled people, environment impact, livelihood, rural employment, agriculture, healthcare, energy, transport, sanitation, water, education. This conference aims to help innovators to share their best practices or products developed to solve specific local problems which in turn may help the other researchers to take inspiration to solve problems in their region. On the other hand, technologies proposed by expert researchers may find applications in different regions. This offers a multidisciplinary platform for researchers from a broad range of disciplines of Science, Engineering and Technology for reporting innovations at different levels.

Download or read book Basics of Geomatics written by Mario A. Gomarasca and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomatics is a neologism, the use of which is becoming increasingly widespread, even if it is not still universally accepted. It includes several disciplines and te- niques for the study of the Earth’s surface and its environments, and computer science plays a decisive role. A more meaningful and appropriate expression is G- spatial Information or GeoInformation. Geo-spatial Information embeds topography in its more modern forms (measurements with electronic instrumentation, sophisticated techniques of data analysis and network compensation, global satellite positioning techniques, laser scanning, etc.), analytical and digital photogrammetry, satellite and airborne remote sensing, numerical cartography, geographical information systems, decision support systems, WebGIS, etc. These specialized elds are intimately interrelated in terms of both the basic science and the results pursued: rigid separation does not allow us to discover several common aspects and the fundamental importance assumed in a search for solutions in the complex survey context. The objective pursued by Mario A. Gomarasca, one that is only apparently modest, is to publish an integrated text on the surveying theme, containing simple and comprehensible concepts relevant to experts in Geo-spatial Information and/or speci cally in one of the disciplines that compose it. At the same time, the book is rigorous and synthetic, describing with precision the main instruments and methods connected to the multiple techniques available today.