Download or read book Metals Advances in Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 1893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals—Advances in Research and Application: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Metals. The editors have built Metals—Advances in Research and Application: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Metals in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Metals—Advances in Research and Application: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Advances in Heterogeneous Material Mechanics 2011 written by Jinghong Fan and published by DEStech Publications, Inc. This book was released on 2011 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ductility and Formability of Metals written by Giovanni Straffelini and published by Elsevier. This book was released on 2023-03-23 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductility and Formability of Metals: A Metallurgical Engineering Perspective uses metallurgical, mechanical and physical principles and concepts to explain ductility while emphasizing the influence of material microstructure on damage mechanisms. Focusing on steel, aluminum, copper, titanium and magnesium alloys, the book examines the strain hardening behaviors of these metals and alloys, the influence of strain rate and temperature, and ductile fracture mechanics. Hot plastic deformation is covered with special consideration given to its interplay with recrystallization phenomena. Other phenomena such as Dynamic Strain Ageing (DSA) and Adiabatic Shear Banding (ASB) are discussed, and metal working applications such as forging, extrusion and machining are included throughout. Methods for control of ductile cracks in metal parts resulting from rolling, forging, extrusion, drawing, and sheet metal forming are also outlined. - Provides an overview on the plastic deformation behavior and ductile fracture of steel, aluminum, copper, titanium and magnesium alloys - Illustrates the influence of microstructure on yield behavior, strain hardening of metals, and the influence of strain rate and temperature - Covers the role of the strain hardening coefficient (n), strain rate index (m), Dynamic Strain Ageing (DSA), and Adiabatic Shear Banding (ASB) - Metalworking applications are provided throughout, including forging, rolling, extrusion, wire drawing, sheet metal forming and machining
Download or read book Complex Concentrated Alloys CCAs written by Sundeep Mukherjee and published by MDPI. This book was released on 2020-11-04 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of several unique articles on the current state of research on complex concentrated alloys, as well as their compelling future opportunities in wide ranging applications. Complex concentrated alloys consist of multiple principal elements and represent a new paradigm in structural alloy design. They show a range of exceptional properties that are unachievable in conventional alloys, including high strength–ductility combination, resistance to oxidation, corrosion/wear resistance, and excellent high-temperature properties. The research articles, reviews, and perspectives are intended to provide a wholistic view of this multidisciplinary subject of interest to scientists and engineers.
Download or read book Aluminium Alloys written by Jürgen Hirsch and published by John Wiley & Sons. This book was released on 2008-11-17 with total page 2580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is a well established modern lightweight engineering and functional material with a unique combination of specific properties like strengh, formability, durability, conductivity, corrosion resistance, etc. It is present in many intelligent solutions in established markets like building, transport, packaging, printing, and many others, in our fast moving modern society. The various aluminium alloys can be processed quite efficiently in large quantities by conventional fabrication routes, as well as in special sophisticated forms and material combinations for highly innovative high–tec solutions and applications. This book contains latest information about all these aspects in form of the refereed papers of the II th International Conference on Aluminium Alloys "ICAA", where world–wide experts from academia and engineers from industry present latest results and new ideas in fundamental as well as applied research. Since 22 years the ICAA series provides scientists and engineers with a complete overview over the latest scientific and technological developments, featuring profound technology–based overviews and new innovative perspectives. This book is a reference for the scientific community as well as for the aluminium industry working on aluminium alloy development, processing and application issues. It gives a global perspective on the current focus of international research with emphasis on in–depth understanding of specific properties and applications of conventional and advanced aluminium alloys.
Download or read book Metals Abstracts written by and published by . This book was released on 1999 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical and Creep Behavior of Advanced Materials written by Indrajit Charit and published by Springer. This book was released on 2017-02-04 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection commemorates the occasion of the honorary symposium that celebrated the 75th birthday and lifelong contributions of Professor K.L. Murty. The topics cover the present status and recent advances in research areas in which he made seminal contributions. The volume includes articles on a variety of topics such as high-temperature deformation behaviors of materials (elevated temperature creep, tensile, fatigue, superplasticity) and their micromechanistic interpretation, understanding mechanical behavior of HCP metals/alloys using crystallographic texture, radiation effects on deformation and creep of materials, mechanical behavior of nanostructured materials, fracture and fracture mechanisms, development and application of small-volume mechanical testing techniques, and general structure-property correlations.
Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heterostructured Materials written by Xiaolei Wu and published by CRC Press. This book was released on 2021-11-24 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterostructured (HS) materials represent an emerging class of materials that are expected to become a major research field for the communities of materials, mechanics, and physics in the next couple of decades. One of the biggest advantages of HS materials is that they can be produced by large-scale industrial facilities and technologies and therefore can be commercialized without the scaling up and high-cost barriers that are often encountered by other advanced materials. This book collects recent papers on the progress in the field of HS materials, especially their fundamental physics. The papers are arranged in a sequence of chapters that will help new researchers entering the field to have a quick and comprehensive understanding of HS materials, including the fundamentals and recent progress in their processing, characterization, and properties.
Download or read book Mechanical Properties written by and published by . This book was released on 1976 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superplasticity in Advanced Materials ICSAM 94 written by Terence G. Langdon and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the superplastic phenomenon was first demonstrated in scientific experiments conducted in the United Kingdom, much of the early systematic work in this area was performed in Russia. This volume covers the recent developments concerning superplastictity phenomena in many materials classes of current interest.
Download or read book Superplasticity in Aerospace written by H. Charles Heikkenen and published by American Society of Civil Engineers. This book was released on 1988 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers of the symposium held in Phoenix, Az., Jan. 1988. Applications of superplastic forming in aerospace manufacturing, as well as basic and applied research will be the focus of this publication. Major sections will detail mechanisms and failure modes of superplasticity; superplastic Al-Li alloys
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2016-04-19 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differenti
Download or read book Extrusion of Aluminium Alloys written by T. Sheppard and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the importance of extruded alloys has increased due to the decline in copper extrusion, increased use in structural applications, environmental impact and reduced energy consumption. There have also been huge technical advances. This text provides comprehensive coverage of the metallurgical, mathematical and practical features of the process.
