Download or read book Gas Separation by Adsorption Processes written by Ralph T. Yang and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas Separation by Adsorption Processes provides a thorough discussion of the advancement in gas adsorption process. The book is comprised of eight chapters that emphasize the fundamentals concept and principles. The text first covers the adsorbents and adsorption isotherms, and then proceeds to detailing the equilibrium adsorption of gas mixtures. Next, the book covers rate processes in adsorbers and adsorber dynamics. The next chapter discusses cyclic gas separation processes, and the remaining two chapters cover pressure-swing adsorption. The book will be of great use to students, researchers, and practitioners of disciplines that involve gas separation processes, such as chemical engineering.
Download or read book Materials Science of Membranes for Gas and Vapor Separation written by Benny Freeman and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science of Membranes for Gas and Vapor Separation is a one-stop reference for the latest advances in membrane-based separation and technology. Put together by an international team of contributors and academia, the book focuses on the advances in both theoretical and experimental materials science and engineering, as well as progress in membrane technology. Special attention is given to comparing polymer and inorganic/organic separation and other emerging applications such as sensors. This book aims to give a balanced treatment of the subject area, allowing the reader an excellent overall perspective of new theoretical results that can be applied to advanced materials, as well as the separation of polymers. The contributions will provide a compact source of relevant and timely information and will be of interest to government, industrial and academic polymer chemists, chemical engineers and materials scientists, as well as an ideal introduction to students.
Download or read book Industrial Gas Handbook written by Frank G. Kerry and published by CRC Press. This book was released on 2007-02-22 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing on Frank G. Kerry's more than 60 years of experience as a practicing engineer, the Industrial Gas Handbook: Gas Separation and Purification provides from-the-trenches advice that helps practicing engineers master and advance in the field. It offers detailed discussions and up-to-date approaches to process cycles for cryogenic separation of
Download or read book Metal Organic Framework Materials written by Leonard R. MacGillivray and published by John Wiley & Sons. This book was released on 2014-09-19 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Organic Frameworks (MOFs) are crystalline compounds consisting of rigid organic molecules held together and organized by metal ions or clusters. Special interests in these materials arise from the fact that many are highly porous and can be used for storage of small molecules, for example H2 or CO2. Consequently, the materials are ideal candidates for a wide range of applications including gas storage, separation technologies and catalysis. Potential applications include the storage of hydrogen for fuel-cell cars, and the removal and storage of carbon dioxide in sustainable technical processes. MOFs offer the inorganic chemist and materials scientist a wide range of new synthetic possibilities and open the doors to new and exciting basic research. Metal-Organic Frameworks Materials provides a solid basis for the understanding of MOFs and insights into new inorganic materials structures and properties. The volume also reflects progress that has been made in recent years, presenting a wide range of new applications including state-of-the art developments in the promising technology for alternative fuels. The comprehensive volume investigates structures, symmetry, supramolecular chemistry, surface engineering, recognition, properties, and reactions. The content from this book will be added online to the Encyclopedia of Inorganic and Bioinorganic Chemistry: http://www.wileyonlinelibrary.com/ref/eibc
Download or read book Membrane Engineering for the Treatment of Gases written by Enrico Drioli and published by Royal Society of Chemistry. This book was released on 2011-07-06 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Membranes already have important applications in artificial organs, the processing of biotechnological products, food manufacture, waste water treatment, and seawater desalination. Their uses in gaseous mixture separations are, however, far from achieving their full potential. Separation of air components, natural gas dehumidification and sweeting, separation and recovery of CO2 from biogas, and H2 from refinery gases are all examples of current industrial applications. The use of membranes for reducing the greenhouse effect and improving energy efficiency has also been suggested. New process intensification strategies in the petrochemical industry have opened up another growth area for gas separation membrane systems and membrane reactors. This two volume set presents the state-of-the-art in membrane engineering for the separation of gases. It addresses future developments in carbon capture and utilization, H2 production and purification, and O2/N2 separation. Topics covered include the: applications of membrane gas separation in the petrochemical industry; implementation of membrane processes for post-combustion capture; commercial applications of membranes in gas separations; simulation of membrane systems for CO2 capture; design and development of membrane reactors for industrial applications; Pd-based membranes in hydrogen production; modelling and simulation of membrane reactors for hydrogen production and purification; novel hybrid membrane/pressure swing adsorption process for gas separation; molecular dynamics as a new tool for membrane design, and physical aging of membranes for gas separations. Volume 2 looks at problems combined with membrane reactors.
Download or read book Membrane Gas Separation written by Benny Freeman and published by John Wiley & Sons. This book was released on 2011-06-20 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gas separation membranes offer a number of benefits over other separation technologies, and they play an increasingly important role in reducing the environmental impacts and costs of many industrial processes. This book describes recent and emerging results in membrane gas separation, including highlights of nanoscience and technology, novel polymeric and inorganic membrane materials, new membrane approaches to solve environmental problems e.g. greenhouse gases, aspects of membrane engineering, and recent achievements in industrial gas separation. It includes: Hyperbranched polyimides, amorphous glassy polymers and perfluorinated copolymers Nanocomposite (mixed matrix) membranes Polymeric magnetic membranes Sequestration of CO2 to reduce global warming Industrial applications of gas separation Developed from sessions of the most recent International Congress on Membranes and Membrane Processes, Membrane Gas Separation gives a snapshot of the current situation, and presents both fundamental results and applied achievements.
Download or read book Gas Separation Membranes written by Ahmad Fauzi Ismail and published by Springer. This book was released on 2015-04-28 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the tremendous progress that has been made in the development of gas separation membranes based both on inorganic and polymeric materials. Materials discussed include polymer inclusion membranes (PIMs), metal organic frameworks (MOFs), carbon based materials, zeolites, as well as other materials, and mixed matrix membranes (MMMs) in which the above novel materials are incorporated. This broad survey of gas membranes covers material, theory, modeling, preparation, characterization (for example, by AFM, IR, XRD, ESR, Positron annihilation spectroscopy), tailoring of membranes, membrane module and system design, and applications. The book is concluded with some perspectives about the future direction of the field.
Download or read book Gas Extraction written by Gerd Brunner and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of compressed gases as solvents has found widespread interest within the scientific community. Its processes have industrial applications. Gas Extraction deals with the possibilities of supercritical gases as solvents for separation processes. The volume combines physico-chemical aspects with chemical engineering methods. The text generalizes as far as possible, and treats examples in detail. Gas Extraction covers, for the first time, the subject in textbook form. Most of the examples provide new results that will be helpful for practicing scientists, engineers, and students who want to make use of the techniques.
Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesor processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureare essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Polymeric Gas Separation Membranes written by D.R. Paul and published by CRC Press. This book was released on 2018-05-04 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Gas Separation Membranes is an outstanding reference devoted to discussing the separation of gases by membranes. An international team of contributors examines the latest findings of membrane science and practical applications and explores the complete spectrum of relevant topics from fundamentals of gas sorption and diffusion in polymers to vapor separation from air. They also compare membrane processes with other separation technologies. This essential book will be valuable to all practitioners and students in membrane science and technology.
Download or read book Encyclopedia of Membranes written by Enrico Drioli and published by Springer. This book was released on 2016-07-14 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: A landmark work covering the major aspects of the science, technology and application of membrane operations and related fields, from basic phenomena to the most advanced applications and future perspectives. Over 1500 concise entries in an A-Z format cover a vibrant field with a multitude of applications in diverse disciplines such as biotechnology, medicine, agro-food and petrochemical industries, environmental protection, as well as drinking water supply. Coverage includes membrane reactors and catalytic design (catalytic membrane reactors). Practically all unit operations of process engineering can be redesigned as membrane unit operations (e. g. membrane distillation, membrane crystallization, membrane stripping, membrane scrubbing). Entries are provided by an international team of experts from academia, research institutions as well as from industry.
Download or read book Membranes For Gas Separations written by Moises A Carreon and published by World Scientific. This book was released on 2017-08-11 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at illustrating several examples of different membrane compositions ranging from inorganic, polymeric, metallic, metal organic framework, and composite which have been successfully deployed to separate industrially relevant gas mixtures including hydrogen, nitrogen, methane, carbon dioxide, olefins/parafins among others. Each book chapter highlights some of the current and key fundamental and technological challenges for these membranes that must be overcome in order to envision its application at industrial level.
Download or read book Basic Equations of the Mass Transport Through a Membrane Layer written by Endre Nagy and published by Elsevier. This book was released on 2012 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a detailed analysis of the mass transport through membrane layers and its effect on different separation processes, this book provides a comprehensive look at the theoretical and practical aspects of membrane transport properties and functions. Basic equations for every membrane are provided to predict the mass transfer rate, the concentration distribution, the convective velocity, the separation efficiency, and the effect of chemical or biochemical reaction taking into account the heterogeneity of the membrane layer to help better understand the mechanisms of the separation processes. The reader will be able to describe membrane separation processes and the membrane reactors as well as choose the most suitable membrane structure for separation and for membrane reactor. Containing detailed discussion of the latest results in transport processes and separation processes, this book is essential for chemistry students and practitioners of chemical engineering and process engineering. Detailed survey of the theoretical and practical aspects of every membrane process with specific equations Practical examples discussed in detail with clear steps Will assist in planning and preparation of more efficient membrane structure separation
Download or read book Natural Zeolites written by G. V. T͡Sit͡sishvili and published by Ellis Horwood. This book was released on 1992 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials for Carbon Capture written by De-en Jiang and published by John Wiley & Sons. This book was released on 2020-02-25 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers a wide range of advanced materials and technologies for CO2 capture As a frontier research area, carbon capture has been a major driving force behind many materials technologies. This book highlights the current state-of-the-art in materials for carbon capture, providing a comprehensive understanding of separations ranging from solid sorbents to liquid sorbents and membranes. Filled with diverse and unconventional topics throughout, it seeks to inspire students, as well as experts, to go beyond the novel materials highlighted and develop new materials with enhanced separations properties. Edited by leading authorities in the field, Materials for Carbon Capture offers in-depth chapters covering: CO2 Capture and Separation of Metal-Organic Frameworks; Porous Carbon Materials: Designed Synthesis and CO2 Capture; Porous Aromatic Frameworks for Carbon Dioxide Capture; and Virtual Screening of Materials for Carbon Capture. Other chapters look at Ultrathin Membranes for Gas Separation; Polymeric Membranes; Carbon Membranes for CO2 Separation; and Composite Materials for Carbon Captures. The book finishes with sections on Poly(amidoamine) Dendrimers for Carbon Capture and Ionic Liquids for Chemisorption of CO2 and Ionic Liquid-Based Membranes. A comprehensive overview and survey of the present status of materials and technologies for carbon capture Covers materials synthesis, gas separations, membrane fabrication, and CO2 removal to highlight recent progress in the materials and chemistry aspects of carbon capture Allows the reader to better understand the challenges and opportunities in carbon capture Edited by leading experts working on materials and membranes for carbon separation and capture Materials for Carbon Capture is an excellent book for advanced students of chemistry, materials science, chemical and energy engineering, and early career scientists who are interested in carbon capture. It will also be of great benefit to researchers in academia, national labs, research institutes, and industry working in the field of gas separations and carbon capture.
Download or read book Membrane Engineering for the Treatment of Gases Gas separation problems with membranes written by Enrico Drioli and published by Royal Society of Chemistry. This book was released on 2011 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set presents the state of the art, and potential for future developments, in membrane engineering for the separation of gases.
Download or read book Membranes for Clean and Renewable Power Applications written by A Gugliuzza and published by Woodhead Publishing. This book was released on 2014-03-31 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development and deployment of membrane technologies continues to advance thanks to innovative materials and novel engineering approaches. Membranes for clean and renewable power applications introduces the principles and concepts of membrane technology and explores the use of this technology in clean energy applications.Chapters in part one introduce the utilization of membrane technology in the production of clean and renewable power and the combining of membrane processes with renewable energy technologies. Part two focusses on membranes for biofuel production and processing including membranes and membrane reactors for the production of biodiesel and second generation biofuels. Part three discusses membranes for syngas, hydrogen and oxygen production and processing. Chapters highlight steam reforming of biofuels for the production of hydrogen-rich gas A., perovskite membrane reactors, and environmental analysis of hydrogen-methane blends for transportation. Chapters in part four explore membranes for fuel cells including ceramic membranes for intermediate temperature solid oxide fuel cells (SOFC), microbial fuel cells, and direct bioethanol fuel cells. Finally, part five discusses membranes integrated with solar, wind energy and water-related applications including membrane technologies for solar-hydrogen production, solar-desalination plants, and the storage as methane of energy generated by wind power and other renewable sources. A final chapter introduces wastewater processing, energy conservation and energy generation.Membranes for clean and renewable power applications is a comprehensive resource for professionals and consultants in the clean and renewable energy industry, membrane and materials scientists and professionals, and academics and researchers in the field. - Introduces the principles and concepts of membrane technology and explores the use of this technology in clean energy applications
