Download or read book Separation Techniques in Clinical Chemistry written by Hassan Y. Aboul-Enein and published by CRC Press. This book was released on 2003-05-28 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference examines innovations in separation science for improved sensitivity and cost-efficiency, increased speed, higher sample throughput and lower solvent consumption in the assessment, evaluation, and validation of emerging drug compounds. It investigates breakthroughs in sample pretreatment, HPLC, mass spectrometry, capillary electrophor
Download or read book New Separation Chemistry Techniques for Radioactive Waste and Other Specific Applications written by Messrs L. Cecille and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this technical seminar was to evaluate the present state of the art in matter of advanced separation techniques like solvent extraction, ion-exchange, chemical precipitation, membrane and electrical processes for the treatment of radioactive liquid waste and a selection of some specific industrial non-radioactive effluents. Through this initiative, the organisers aimed at promoting the exchange of information between scientists from various origins (universities, research centres and industries) while contributing to the necessary overcoming of the artificial barriers which too often limit the "technology transfer" between the nuclear and non-nuclear sectors. Vll CONTENTS PREFACE ........................................ V ABBREVIATIONS ...................................... xiv OPENING SESSION WELCOME ADDRESS C. MANCINI (ENEA) .................................... 3 OPENING ADDRESS S. FINZI (CEC) ....................................... 7 AREAS WHERE ADVANCED SEPARATION TECHNIQUES ARE DESIRABLE G. GROSSI (ENEA), L. CECILLE (CEC) ....................... 11 REVIEW OF NEW EXTRACT ANTS POTENTIALLY APPLICABLE TO THE PROCESSING OF RADIOACTIVE LIQUID WASTES (Summary) P.R. DANESI, International Atomic Energy Agency, Vienna, Austria . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 . . . . . . . . . .
Download or read book Handbook of Separation Techniques for Chemical Engineers written by Philip A. Schweitzer and published by McGraw-Hill Companies. This book was released on 1988 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separation Technologies for the Industries of the Future written by Panel on Separation Technology for Industrial Reuse and Recycling and published by National Academies Press. This book was released on 1999-01-22 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation processesor processes that use physical, chemical, or electrical forces to isolate or concentrate selected constituents of a mixtureare essential to the chemical, petroleum refining, and materials processing industries. In this volume, an expert panel reviews the separation process needs of seven industries and identifies technologies that hold promise for meeting these needs, as well as key technologies that could enable separations. In addition, the book recommends criteria for the selection of separations research projects for the Department of Energy's Office of Industrial Technology.
Download or read book Separations Chemistry written by Fedor Macášek and published by Xlibris Corporation. This book was released on 2016-06-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation of chemical species is a gate to final success of synthesis and preparation of compounds in pure and defined state. Variability of natural and artificial mixtures to be treated is enormous. Task of chemistry is to separate components of homogeneous mixtures (the gaseous and liquid solutions). The book concentrates on understanding the basic philosophies of both equilibrium and nonequilibrium chemical thermodynamics and engineering performance that lay in principle of separation technique such as distillation, crystallization, centrifugation, sorption, membrane separations, chromatography, and liquid-liquid extraction. Specific phenomena connected with photochemical separation, isotope composition, and radioactivity are discussed as well. The book is written for advanced students of chemistry having the knowledge of physical chemistry. Calculation examples are based on the international system of units. Unique list of over 1,300 full references covers scientific literature of the eighteenth to the twenty-first centuries.
Download or read book New Separation Chemistry Techniques for Radioactive Waste and Other Specific Applications written by L. Cécille and published by Springer. This book was released on 1991-07-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Proceedings of a technical seminar jointly organized by the Commission of the European Communities (CEC), Directorate-General for Science, Research, and Development and by the Italian Commission for Nuclear and Alternative Energy Sources (ENEA)"--T.p. verso.
Download or read book Separation Processes written by C. Judson King and published by Courier Corporation. This book was released on 2013-12-18 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published: New York: McGraw-Hill, 1971. 2nd ed. Includes a new introduction.
Download or read book Recent Progress in Actinides Separation Chemistry written by Zenko Yoshida and published by World Scientific. This book was released on 1997 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book brings together some of the latest developments in solution chemistry and separation chemistry of f-block elements, which include (i) new solvent extraction systems and extractants for the separation of actinide and lanthanide elements, (ii) novel approach for fundamental solution chemistry study of solvent extraction reactions, and (iii) separation methods of new principle for f-block elements."--Publisher's website.
Download or read book Chemical Separation Technologies and Related Methods of Nuclear Waste Management written by Gregory R. Choppin and published by Springer Science & Business Media. This book was released on 1999-02-28 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation technologies are of crucial importance to the goal of significantly reducing the volume of high-level nuclear waste, thereby reducing the long-term health risks to mankind. International co-operation, including the sharing of concepts and methods, as well as technology transfer, is essential in accelerating research and development in the field. The writers of this book are all internationally recognised experts in the field of separation technology, well qualified to assess and criticize the current state of separation research as well as to identify future opportunities for the application of separation technologies to the solution of nuclear waste management problems. The major emphases in the book are research opportunities in the utilization of innovative and potentially more efficient and cost effective processes for waste processing/treatment, actinide speciation/separation methods, technological processing, and environmental restoration.
Download or read book Boron Separation Processes written by Nalan Kabay and published by Elsevier. This book was released on 2015-01-19 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impending crisis posed by water stress and poor sanitation represents one of greatest human challenges for the 21st century, and membrane technology has emerged as a serious contender to confront the crisis. Yet, whilst there are countless texts on wastewater treatment and on membrane technologies, none address the boron problem and separation processes for boron elimination. Boron Separation Processes fills this gap and provides a unique and single source that highlights the growing and competitive importance of these processes. For the first time, the reader is able to see in one reference work the state-of-the-art research in this rapidly growing field. The book focuses on four main areas: - Effect of boron on humans and plants - Separation of boron by ion exchange and adsorption processes - Separation of boron by membrane processes - Simulation and optimization studies for boron separation - Provides in one source a state-of-the-art overview of this compelling area - Reviews the environmental impact of boron before introducing emerging boron separation processes - Includes simulation and optimization studies for boron separation processes - Describes boron separation processes applicable to specific sources, such as seawater, geothermal water and wastewater
Download or read book Separation Process Essentials written by Alan M. Lane and published by CRC Press. This book was released on 2019-11-07 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation Process Essentials provides an interactive approach for students to learn the main separation processes (distillation, absorption, stripping, and solvent extraction) using material and energy balances with equilibrium relationships, while referring readers to other more complete works when needed. Membrane separations are included as an example of non-equilibrium processes. This book reviews and builds on material learned in the first chemical engineering courses such as Material and Energy Balances and Thermodynamics as applied to separations. It relies heavily on example problems, including completely worked and explained problems followed by "Try This At Home" guided examples. Most examples have accompanying downloadable Excel spreadsheet simulations. The book also offers a complementary website, http://separationsbook.com, with supplementary material such as links to YouTube tutorials, practice problems, and the Excel simulations. This book is aimed at second and third year undergraduate students in Chemical engineering, as well as professionals in the field of Chemical engineering, and can be used for a one semester course in separation processes and unit operations.
Download or read book Catalyst Separation Recovery and Recycling written by David J. Cole-Hamilton and published by Springer Science & Business Media. This book was released on 2006-01-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at new ways of tackling the problem of separating reaction products from homogeneous catalytic solutions. The new processes involve low leaching supported catalysts, soluble supports such as polymers and dendrimers and unusual solvents such as water, fluorinated organics, ionic liquids and supercritical fluids. The advantages of the different possibilities are discussed alongside suggestions for further research that will be required for commercialisation. Unlike other books, in addition to the chemistry involved, the book looks at the process design that would be required to bring the new approaches to fruition. Comparisons are given with existing processes that have already been successfully applied and examples are given where these approaches are not suitable. The book includes: - New processes for the separation of products from solutions containing homogeneous catalysts - Catalysts on insoluble or soluble supports – fixed bed catalysts - continuous flow or ultrafiltration - Biphasic systems: water - organic, fluorous - organic, ionic liquid – organic, supercritical fluids (monophasic or biphasic with water, organic or ionic liquid) - Comparisons with current processes involving atmospheric or low temperature distillation - Consideration of Chemistry and Process Design - Advantages and disadvantages of each process exposed - Consideration of what else is need for commercialisation
Download or read book A Research Agenda for Transforming Separation Science written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-10-30 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Separation science plays a critical role in maintaining our standard of living and quality of life. Many industrial processes and general necessities such as chemicals, medicines, clean water, safe food, and energy sources rely on chemical separations. However, the process of chemical separations is often overlooked during product development and this has led to inefficiency, unnecessary waste, and lack of consensus among chemists and engineers. A reevaluation of system design, establishment of standards, and an increased focus on the advancement of separation science are imperative in supporting increased efficiency, continued U.S. manufacturing competitiveness, and public welfare. A Research Agenda for Transforming Separation Science explores developments in the industry since the 1987 National Academies report, Separation and Purification: Critical Needs and Opportunities. Many needs stated in the original report remain today, in addition to a variety of new challenges due to improved detection limits, advances in medicine, and a recent emphasis on sustainability and environmental stewardship. This report examines emerging chemical separation technologies, relevant developments in intersecting disciplines, and gaps in existing research, and provides recommendations for the application of improved separation science technologies and processes. This research serves as a foundation for transforming separation science, which could reduce global energy use, improve human and environmental health, and advance more efficient practices in various industries.
Download or read book Separation of Molecules Macromolecules and Particles written by Kamalesh K. Sirkar and published by Cambridge University Press. This book was released on 2014-01-16 with total page 923 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing chemical engineering undergraduate and graduate students with a basic understanding of how separation of a mixture of molecules, macromolecules or particles is achieved, this textbook is a comprehensive introduction to the engineering science of separation. • Students learn how to apply their knowledge to determine the separation achieved in a given device or process • Real-world examples are taken from biotechnology, chemical, food, petrochemical, pharmaceutical and pollution control industries • Worked examples, elementary separator designs and chapter-end problems are provided, giving students a practical understanding of separation. The textbook systematically develops different separation processes by considering the forces causing the separation and how this separation is influenced by the patterns of bulk flow in the separation device. Readers will be able to take this knowledge and apply it to their own future studies and research in separation and purification. Online resources include solutions to the exercises and guidance for computer simulations.
Download or read book Enantiomer Separation written by Fumio Toda and published by Springer Science & Business Media. This book was released on 2007-11-04 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of important advances in asymmetric synthesis, chiral compounds cannot all be obtained in a pure state by asymmetric synthesis. As a result, enantiomer separation remains an important technique for obtaining optically active materials. Although asymmetric synthesis is a once-only procedure, an enantiomer separation process can be repeated until the optically pure sample is obtained. This book discusses several new enantiomer separation methods using modern techniques developed by experts in the field. These methods consist mainly of the following three types: 1) Enantiomer separation by inclusion complexation with a chiral host compound 2) Enantiomer separation using biological methods 3) Enantiomer separation by HPLC chromatography using a column containing a chiral stationary phase. Separation of a racemic compound has been called “optical resolution” or simply “resolution”. Nowadays, the descriptions “enantiomer resolution” or “enantiomer separation” are also commonly used. Accordingly, “Enantiomer Separation” is used in the title of this book. The editor and all chapter contributors hope that this book is helpful for scientists and engineers working in this field.
Download or read book Chromatography written by Muhammad Asif Hanif and published by Independently Published. This book was released on 2021-06 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chromatography book provides easy understanding for students, technicians, faculty members and researchers. It covers chromatography techniques in sufficient depth while being concise. The book includes all recent technology advances and has fundamental textbook structures for further improving the learning experiences. Importantly, the text covers all major modern chromatographic techniques including columns, thin layer, paper, gas, high pressure liquid, supercritical fluid, micellar, counter current and size exclusion chromatography as well as electrophoretic separations and selected experimental procedures adopted in chromatographic separations. A complete book chapter is included on theoretical considerations of chromatography.
Download or read book Advanced Separation Techniques for Nuclear Fuel Reprocessing and Radioactive Waste Treatment written by Kenneth L Nash and published by Elsevier. This book was released on 2011-03-15 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced separations technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of radioactive waste produced by the nuclear power industry. Nuclear fuel reprocessing techniques not only allow for recycling of useful fuel components for further power generation, but by also separating out the actinides, lanthanides and other fission products produced by the nuclear reaction, the residual radioactive waste can be minimised. Indeed, the future of the industry relies on the advancement of separation and transmutation technology to ensure environmental protection, criticality-safety and non-proliferation (i.e., security) of radioactive materials by reducing their long-term radiological hazard.Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment provides a comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment. Part one covers the fundamental chemistry, engineering and safety of radioactive materials separations processes in the nuclear fuel cycle, including coverage of advanced aqueous separations engineering, as well as on-line monitoring for process control and safeguards technology. Part two critically reviews the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment. The section includes discussions of advanced PUREX processes, the UREX+ concept, fission product separations, and combined systems for simultaneous radionuclide extraction. Part three details emerging and innovative treatment techniques, initially reviewing pyrochemical processes and engineering, highly selective compounds for solvent extraction, and developments in partitioning and transmutation processes that aim to close the nuclear fuel cycle. The book concludes with other advanced techniques such as solid phase extraction, supercritical fluid and ionic liquid extraction, and biological treatment processes.With its distinguished international team of contributors, Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment is a standard reference for all nuclear waste management and nuclear safety professionals, radiochemists, academics and researchers in this field. - A comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment - Details emerging and innovative treatment techniques, reviewing pyrochemical processes and engineering, as well as highly selective compounds for solvent extraction - Discusses the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment
