Download or read book International Aerospace Abstracts written by and published by . This book was released on 1970 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Note written by and published by . This book was released on 1970 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation Study of Three Instrument Displays to Assist in Airplane Thrust Management written by Milton D. McLaughlin and published by . This book was released on 1970 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three displays were evaluated on a piloted simulator, each of which provided information which could be used in thrust management. The three displays were (1) rate of change of speed, (2) potential flight-path angle, and (3) potential rate of climb. Results are presented in the form of time histories, histograms, and pilot comments. The results include comparisons of flight-path and speed control and throttle activity with and without each display and pilot comments.

Download or read book Friction and Contact Resistance for Gallium lubricated Low speed Copper Sliprings in Vacuum written by John S. Przybyszewski and published by . This book was released on 1970 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings in Print written by and published by . This book was released on 1970 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Space Vehicle Mechanisms written by Peter L. Conley and published by John Wiley & Sons. This book was released on 1998-02-27 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Entwicklung von Weltraumfahrzeugen ist ein Industriezweig, der in den vergangenen drei Jahrzehnten beständig gewachsen ist. Heute ist es eine komplexe technische, internationale Branche. Dieses Buch vermittelt Informationen über alle Mechanismen von Weltraumfahrzeugen. Spitzenexperten auf diesem Gebiet, die in verschiedenen Disziplinen zu Hause sind, haben einen wichtigen Beitrag hierzu geleistet. Das Buch ist in drei Teile untergliedert: Grundlagen und technische Eigenschaften wichtiger Materialien; Entwicklung und Verhalten kritischer Komponenten und eine Einführung in Fahrzeugniveau-Analysen und Integrationstechniken. (01/98)

Download or read book Onsite Wastewater Treatment Systems Manual written by and published by . This book was released on 2002 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This manual contains overview information on treatment technologies, installation practices, and past performance."--Introduction.

Download or read book Modelling and Control of Switched Reluctance Machines written by Rui Araújo and published by BoD – Books on Demand. This book was released on 2020-09-09 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, switched reluctance machines (SRMs) play an increasingly important role in various sectors due to advantages such as robustness, simplicity of construction, low cost, insensitivity to high temperatures, and high fault tolerance. They are frequently used in fields such as aeronautics, electric and hybrid vehicles, and wind power generation. This book is a comprehensive resource on the design, modeling, and control of SRMs with methods that demonstrate their good performance as motors and generators.

Download or read book Foundations Earth Structures written by and published by . This book was released on 1986 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Large Space Structures Systems in the Space Station Era written by and published by . This book was released on 1991 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Food Sanitation written by Norman G. Marriott and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large volume food processing and preparation operations have increased the need for improved sanitary practices from processing to consumption. This trend presents a challenge to every employee in the food processing and food prepara tion industry. Sanitation is an applied science for the attainment of hygienic conditions. Because of increased emphasis on food safety, sanitation is receiving increased attention from those in the food industry. Traditionally, inexperienced employees with few skills who have received little or no training have been delegated sanitation duties. Yet sanitation employees require intensive training. In the past, these employees, including sanitation program managers, have had only limited access to material on this subject. Technical information has been confined primarily to a limited number of training manuals provided by regulatory agen cies, industry and association manuals, and recommendations from equipment and cleaning compound firms. Most of this material lacks specific information related to the selection of appropriate cleaning methods, equipment, compounds, and sanitizers for maintaining hygienic conditions in food processing and prepara tion facilities. The purpose of this text is to provide sanitation information needed to ensure hygienic practices. Sanitation is a broad subject; thus, principles related to con tamination, cleaning compounds, sanitizers, and cleaning equipment, and specific directions for applying these principles to attain hygienic conditions in food processing and food preparation are discussed. The discussion starts with the importance of sanitation and also includes regulatory requirements and voluntary sanitation programs including additional and updated information on Hazard Analysis Critical Control Points (HACCP).

Download or read book Pile Design and Construction Practice Fifth Edition written by Michael Tomlinson and published by CRC Press. This book was released on 2007-12-06 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.

Download or read book Lubrication Corrosion and Wear written by United States. National Aeronautics and Space Administration Scientific and Technical Information Division and published by . This book was released on 1966 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standard Handbook of Machine Design written by Joseph Edward Shigley and published by McGraw-Hill Professional Publishing. This book was released on 1996 with total page 1672 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest ideas in machine analysis and design have led to a major revision of the field's leading handbook. New chapters cover ergonomics, safety, and computer-aided design, with revised information on numerical methods, belt devices, statistics, standards, and codes and regulations. Key features include: *new material on ergonomics, safety, and computer-aided design; *practical reference data that helps machines designers solve common problems--with a minimum of theory. *current CAS/CAM applications, other machine computational aids, and robotic applications in machine design. This definitive machine design handbook for product designers, project engineers, design engineers, and manufacturing engineers covers every aspect of machine construction and operations. Voluminous and heavily illustrated, it discusses standards, codes and regulations; wear; solid materials, seals; flywheels; power screws; threaded fasteners; springs; lubrication; gaskets; coupling; belt drive; gears; shafting; vibration and control; linkage; and corrosion.

Download or read book Friction Science and Technology written by Peter J. Blau and published by CRC Press. This book was released on 2008-10-20 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Should have broad appeal in many kinds of industry, ranging from automotive to computers-basically any organization concerned with products having moving parts!"-David A. Rigney, Materials Science and Engineering Department, Ohio State University, Columbus, USAIn-Depth Coverage of Frictional ConceptsFriction affects so many aspects of daily l

Download or read book Geothermal Direct Use Engineering and Design Guidebook written by Paul J. Lienau and published by . This book was released on 1989 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Basketball Sports Medicine and Science written by Lior Laver and published by Springer Nature. This book was released on 2020-10-05 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a comprehensive educational resource not only for basketball medical caregivers and scientists but for all basketball personnel. Written by a multidisciplinary team of leading experts in their fields, it provides information and guidance on injury prevention, injury management, and rehabilitation for physicians, physical therapists, athletic trainers, rehabilitation specialists, conditioning trainers, and coaches. All commonly encountered injuries and a variety of situations and scenarios specific to basketball are covered with the aid of more than 200 color photos and illustrations. Basketball Sports Medicine and Science is published in collaboration with ESSKA and will represent a superb, comprehensive educational resource. It is further hoped that the book will serve as a link between the different disciplines and modalities involved in basketball care, creating a common language and improving communication within the team staff and environment.