Download or read book Silicon Carbide Ceramics written by Andrew J. Ruys and published by Elsevier. This book was released on 2023-01-22 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been three decades since the last significant book was published on SiC ceramics (other than those books that specifically focus on SiC semiconductors). Thirty years has been a long time in the world of SiC ceramics. In the early 1990s, SiC was still a relatively obscure ceramic even within the materials community, prominent only as an industrial abrasive (carborundum), and a refractory (Chapter 7). This has all changed dramatically in the 21st century. For example, As a semiconductor, SiC greatly surpasses silicon in performance, especially in high-power systems. Its market penetration since its launch in 2001 has been exponential. Single-crystal SiC semiconductors are covered in Chapter 3 Millions of military and paramilitary personnel have globally been protected with lightweight SiC body armour, since the late 1990s. Body armour is covered in Chapters 4 and 5 SiC–SiC is a composite material close to commercialization that makes possible high-temperature load-bearing applications hitherto only able to be hypothesized: from ultra-high-temperature jet turbine blades to advanced nuclear fuel encapsulation, the possibilities are very promising. Aerospace applications are covered in Chapter 9 Other key areas that are addressed are blast-resistant SiC vehicle/vessel armour in Chapter 8 and wear-resistant SiC ceramics in Chapter 6 Silicon Carbide Ceramics will be an essential reference resource for academic and industrial researchers and materials scientists and engineers working in ceramic materials for the semiconductor, defence, aerospace, wear resistance and refractory fields Presents an extensive review of the history, production and properties of SiC ceramics, including their characterization and applications Discusses classical and state-of-the-art sintering technologies for SiC ceramics Focuses on the future of ceramic manufacturing and advanced ceramic additive technologies
Download or read book Semiconductor Ceramics written by Leszek Hozer and published by Prentice Hall. This book was released on 1994 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide Ceramics 1 written by S. Somiya and published by Springer Science & Business Media. This book was released on 1991-08-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discovered by Edward G. Acheson about 1890, silicon carbide is one of the oldest materials and also a new material. It occurs naturally in meteorites, but in very small amounts and is not in a useable state as an industrial material. For industrial require ments, large amounts of silicon carbide must be synthesized by solid state reactions at high temperatures. Silicon carbide has been used for grinding and as an abrasive material since its discovery. During World War II, silicon carbide was used as a heating element; however, it was difficult to obtain high density sintered silicon carbide bodies. In 1974, S. Prochazka reported that the addition of small amounts of boron compounds and carbide were effective in the sintering process to obtain high density. It was then possible to produce high density sintered bodies by pressureless sintering methods in ordinary atmosphere. Since this development, silicon carbide has received great attention as one of the high temperature structural ceramic materials. Since the 1970s, many research papers have appeared which report studies of silicon carbide and silicon nitride for structural ceramics.
Download or read book Semiconductor Ceramics written by Leszek Hozer and published by . This book was released on 1994 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramics Databook written by Hiroaki Yanagida and published by CRC Press. This book was released on 1987 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Packaging written by Andrea Chen and published by CRC Press. This book was released on 2016-04-19 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: In semiconductor manufacturing, understanding how various materials behave and interact is critical to making a reliable and robust semiconductor package. Semiconductor Packaging: Materials Interaction and Reliability provides a fundamental understanding of the underlying physical properties of the materials used in a semiconductor package. By tying together the disparate elements essential to a semiconductor package, the authors show how all the parts fit and work together to provide durable protection for the integrated circuit chip within as well as a means for the chip to communicate with the outside world. The text also covers packaging materials for MEMS, solar technology, and LEDs and explores future trends in semiconductor packages.
Download or read book Semiconductor Materials written by B.G. Yacobi and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technological progress is closely related to the developments of various materials and tools made of those materials. Even the different ages have been defined in relation to the materials used. Some of the major attributes of the present-day age (i.e., the electronic materials’ age) are such common tools as computers and fiber-optic telecommunication systems, in which semiconductor materials provide vital components for various mic- electronic and optoelectronic devices in applications such as computing, memory storage, and communication. The field of semiconductors encompasses a variety of disciplines. This book is not intended to provide a comprehensive description of a wide range of semiconductor properties or of a continually increasing number of the semiconductor device applications. Rather, the main purpose of this book is to provide an introductory perspective on the basic principles of semiconductor materials and their applications that are described in a relatively concise format in a single volume. Thus, this book should especially be suitable as an introductory text for a single course on semiconductor materials that may be taken by both undergraduate and graduate engineering students. This book should also be useful, as a concise reference on semiconductor materials, for researchers working in a wide variety of fields in physical and engineering sciences.
Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-07-01 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements
Download or read book Packaging of High Power Semiconductor Lasers written by Xingsheng Liu and published by Springer. This book was released on 2014-07-14 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces high power semiconductor laser packaging design. The challenges of the design and various packaging and testing techniques are detailed by the authors. New technologies and current applications are described in detail.
Download or read book Handbook of Advanced Ceramics written by and published by Academic Press. This book was released on 2013-04-11 with total page 1259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world and includes sections on Basic Science of Advanced Ceramics, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics. - Contributions from more than 50 leading researchers from around the world - Covers basic science of advanced ceramics, functional ceramics (electro-ceramics and optoelectro-ceramics), and engineering ceramics - Approximately 750 illustrations
Download or read book Wide Bandgap Power Semiconductor Packaging written by Katsuaki Suganuma and published by Woodhead Publishing. This book was released on 2018-05-28 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide Bandgap Power Semiconductor Packaging: Materials, Components, and Reliability addresses the key challenges that WBG power semiconductors face during integration, including heat resistance, heat dissipation and thermal stress, noise reduction at high frequency and discrete components, and challenges in interfacing, metallization, plating, bonding and wiring. Experts on the topic present the latest research on materials, components and methods of reliability and evaluation for WBG power semiconductors and suggest solutions to pave the way for integration. As wide bandgap (WBG) power semiconductors, SiC and GaN, are the latest promising electric conversion devices because of their excellent features, such as high breakdown voltage, high frequency capability, and high heat-resistance beyond 200 C, this book is a timely resource on the topic. - Examines the key challenges of wide bandgap power semiconductor packaging at various levels, including materials, components and device performance - Provides the latest research on potential solutions, with an eye towards the end goal of system integration - Discusses key problems, such as thermal management, noise reduction, challenges in interconnects and substrates
Download or read book Modern Machining Technology written by Bijoy Bhattacharyya and published by Academic Press. This book was released on 2019-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Machining Technology: Advanced, Hybrid, Micro Machining and Super Finishing Technology explores complex and precise components with challenging shapes that are increasing in demand in industry. As the first book to cover all major technologies in this field, readers will find the latest technical developments and research in one place, allowing for easy comparison of specifications. Technologies covered include mechanical, thermal, chemical, micro and hybrid machining processes, as well as the latest advanced finishing technologies. Each topic is accompanied by a basic overview, examples of typical applications and studies of performance criteria. In addition, readers will find comparative advantages, model questions and solutions. - Addresses a broad range of modern machining techniques, providing specifications for easy comparison - Includes descriptions of the main applications for each method, along with the materials or products needed - Provides the very latest research in processes, including hybrid machining
Download or read book Microstructure Property and Processing of Functional Ceramics written by Qingrui Yin and published by Springer Science & Business Media. This book was released on 2010-06-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructure, Property and Processing of Functional Ceramics describes the preparation, property and local structure microscopy of functional ceramics. It covers functional ceramic fabrication processing, grain boundary phenomena and micro-, nanoscale structures characterizations including scanning electron acoustic microscopy, scanning probe acoustic microscopy and piezoresponse force microscopy. This book is intended for advanced undergraduates, graduates and researchers in the field of materials science, microelectronics, optoelectronics and microscopy. Qingrui Yin and Binghe Zhu both are professors at the Shanghai Institute of Ceramics, Chinese Academy of Sciences; Dr. Huarong Zeng is an associate professor at the Shanghai Institute of Ceramics, Chinese Academy of Sciences.
Download or read book Structural Ceramics written by John Jr. Wachtman and published by Elsevier. This book was released on 2012-12-02 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 29: Structural Ceramics presents an overview of structural ceramics. This book begins with a survey of potential uses, designs, and barriers of particular types of structural ceramics. The silicon carbide family, silicon nitride and sialon family, and transformation toughened ceramics are discussed in detail, followed by an analysis of the various processing routes of each family of structural ceramics. This publication concludes with a review of the tribology of structural ceramics, considering many applications for structural ceramics in heat engines and other machinery that involve moving parts which must often resist wear or erosion. This volume is recommended for engineers, scientists, and researchers concerned with structural ceramics.
Download or read book An Introduction to Ceramics written by Roman Pampuch and published by Springer. This book was released on 2014-09-13 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book embraces both traditional and advanced ceramics produced from synthetic or deeply transformed natural raw materials. Following the path of ceramic innovation, this introduction explains electric properties of ceramic conductors, like high-temperature superconductors, reflects on the interaction of material and electromagnetic radiation, presents the importance of voids and defects in the material, and provides an outlook on most recent developments in the field of ceramics, such as smart or self-healing materials . It provides a quick grasp of the main points of ceramic thinking and is an ideal starting point for students in the field of chemistry, materials science or solid state physics.
Download or read book Ceramic Microstructures written by Antoni P. Tomsia and published by Springer Science & Business Media. This book was released on 1998-04-30 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, titled Proceedings of the International Materials Symposium on Ce ramic Microstructures: Control at the Atomic Level summarizes the progress that has been achieved during the past decade in understanding and controlling microstructures in ceram ics. A particular emphasis of the symposium, and therefore of this volume, is advances in the characterization, understanding, and control of micro structures at the atomic or near-atomic level. This symposium is the fourth in a series of meetings, held every ten years, devoted to ceramic microstructures. The inaugural meeting took place in 1966, and focussed on the analysis, significance, and production of microstructure; the symposium emphasized the need for, and importance of characterization in achieving a more complete understanding of the physical and chemical characteristics of ceramics. A consensus emerged at that meeting on the critical importance of characterization in achieving a more complete understanding of ceramic properties. That point of view became widely accepted in the ensuing decade. The second meeting took place in 1976 at a time of world-wide energy shortages and thus emphasized energy-related applications of ceramics, and more specifically, microstructure-property relationships of those materials. The third meeting, held in 1986, was devoted to the role that interfaces played both during processing, and in influencing the ultimate properties of single and polyphase ceramics, and ceramic-metal systems.
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2001-10-23 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
