Download or read book Semi Solid Processing of Alloys and Composites written by Shahrooz Nafisi and published by MDPI. This book was released on 2020-06-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-solid metal (SSM) processing, as a viable alternative manufacturing route to those of conventional casting and forging, has not yet been fully exploited despite nearly half a century since its introduction to the metal industry. The slow pace of adopting SSM routes may be due to various reasons, including capital costs, profit margins, and, most importantly, the lack of detailed analysis of various SSM processes in open literature to confidently establish their advantages over more conventional routes. Therefore, the SSM community must disseminate their findings more effectively to generate increased confidence in SSM processes in the eyes of our industrial leaders. As such, we have embarked on the task to invite the leaders in SSM research to share their findings in a Special Issue dedicated to semi-solid processing of metals and composites. SSM processing takes advantage of both forming and shaping characteristics usually employed for liquid and solid materials. In the absence of shear forces, the semi-solid metal has similar characteristics to solids, i.e., easily transferred and shaped; by applying a defined force, the viscosity is reduced and the material flows like a liquid. These unique dual characteristics have made SSM routes attractive alternatives to conventional casting on an industrial scale. With the intention of taking full advantage of SSM characteristics, it is crucial to understand SSM processing, including topics such as solidification and structural evolution, flow behavior through modelling and rheology, new processes and process control, alloy development, and properties in general. This Special Issue focuses on the recent research and findings in the field with the aim of filling the gap between industry and academia, and to shed light on some of the fundamentals of science and technology of semi-solid processing.
Download or read book Semi Solid of Alloys and Composites XV written by Qiang Zhu and published by Trans Tech Publications Ltd. This book was released on 2019-01-03 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: 15th International Conference on Semi-Solid Processing of Alloys and Composites (S2P) Selected, peer reviewed papers from the 15th International Conference on Semi-Solid of Alloys and Composites XV (S2P 2018), October 22-24, 2018, Shenzhen, China
Download or read book Semi solid Processing of Alloys written by David H. Kirkwood and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semisolid metallurgy (SSM) is now some 37-years-old in terms of time from its conception and ?rst reduction to practice in the laboratory. In the intervening years, there has been a steadily growing body of research on the subject and the beginning of signi?cant industrial applications. The overall ?eld of SSM comprises today a large number of speci?c process routes, almost all of which fall in the category of either “Rheocasting” or Thi- casting.” The former begins with liquid metal and involves agitation during partial solidi?cation followed by forming. The latter begins with solid metal of suitable structure and involves heating to the desired fraction solid and forming. Research over the past 37 years, and particularly over the last decade, has provided a detailed picture of process fundamentals and led to a wide range of speci?c SSM processes and process innovations. Industrial studies and actual p- duction experience are providing a growing picture of the process advantages and limitations. At this time, the conditions for eventual wide adoption of SSM appear favorable, both for nonferrous and ferrous alloys. It must, however, be recognized that major innovations, such as SSM become adopted only slowly by industries where capital costsarehigh,pro?tmarginsaremodest,andfailuretomeetcustomercommitments carries a high penalty.
Download or read book Thixoforming written by Gerhard Hirt and published by John Wiley & Sons. This book was released on 2009-02-11 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a sound technological overview, while also including the fundamental aspects, this book provides the knowledge needed to master the highly challenging process characteristics for successful application in industrial production. It summarizes the first-hand experience gained from twelve years of collaborative research covering materials science, rheology, casting and forming, control and surface technology as well as the modeling of flow behavior, tool engineering and systems engineering, and thus treats all the vital aspects of this field. For materials scientists, physicists, engineers, and those working in the metal processing industry.
Download or read book Semi Solid Processing of Aluminum Alloys written by Shahrooz Nafisi and published by Springer. This book was released on 2016-09-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in great detail the semi-solid processing of aluminum alloys. The authors examine the fundamentals of semi-solid metal processing, provide guidelines for research, illustrate the tools that are employed, and explain the measured parameters for semi-solid processing characterization.
Download or read book Modeling for Casting and Solidification Processing written by Kuang-Oscar Yu and published by CRC Press. This book was released on 2001-10-16 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text seeks to provide a comprehensive technical foundation and practical examples for casting process modelling technology. It highlights fundamental theory for solidification and useful applications for industrial production. It also details shape and ingot castings, semi-solid metalworking, and spray forming.
Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.
Download or read book Magnesium Technology 2001 written by John N. Hryn and published by John Wiley & Sons. This book was released on 2013-09-23 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented at the Proceedings of the symposium jointly sponsored by the Magnesium Committee and Reactive Metals Committee of the TMS Light Metals Division (LMD), the International Magnesium Association, and the Corrosion and Environmental Effects Committee, a joint committee of the TMS Structural Materials Division (SMD) and the ASM International Materials Science Critical Technology Sector, held during the 2001 TMS Annual Meeting in New Orleans, Louisiana, U.S.A, February 11-15, 2001.
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
Download or read book Magnesium Injection Molding written by Frank Czerwinski and published by Springer Science & Business Media. This book was released on 2007-12-07 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book, being the first one on magnesium injection molding, is to treat both the scientific background and the technological aspects as they are understood at present. All aspects of material development, manufacturing and engineering are covered. The book provides a single source of information covering the interdisciplinary field of net shape forming of magnesium alloys. It reflects a unique blend of science and industrial practice.
Download or read book ICCAP 2021 written by A Mohan and published by European Alliance for Innovation. This book was released on 2021-12-22 with total page 2763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding constitutes the thoroughly refereed proceedings of the 1st International Conference on Combinatorial and Optimization, ICCAP 2021, December 7-8, 2021. This event was organized by the group of Professors in Chennai. The Conference aims to provide the opportunities for informal conversations, have proven to be of great interest to other scientists and analysts employing these mathematical sciences in their professional work in business, industry, and government. The Conference continues to promote better understanding of the roles of modern applied mathematics, combinatorics, and computer science to acquaint the investigator in each of these areas with the various techniques and algorithms which are available to assist in his or her research. We selected 257 papers were carefully reviewed and selected from 741 submissions. The presentations covered multiple research fields like Computer Science, Artificial Intelligence, internet technology, smart health care etc., brought the discussion on how to shape optimization methods around human and social needs.
Download or read book Advances in Material Forming written by Francisco Chinesta and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book groups the main advances in material forming, considering different processes, both conventional and non-conventional. It focuses on polymers, composites and metals, which are analyzed from the state of the art. Special emphasis is devoted to the contributions of the European Scientific Association for Material Forming (ESAFORM) during the last decade and in particular the ones coming from its annual international conference.
Download or read book Semi Solid Processing of Alloys and Composites written by C. G. Kang and published by . This book was released on 2006 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is dedicated to the science and technology of the semi-solid processing of metals.
Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.
Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book Light Metals 2012 written by Carlos Suarez and published by Springer. This book was released on 2016-12-23 with total page 1314 pages. Available in PDF, EPUB and Kindle. Book excerpt: An update of the definitive annual reference source in the field of aluminum production and related light metals technologies, a great mix of materials science and practical, applied technology surrounding aluminum, bauxite, aluminum reduction, rolling, casting, and production.
