Download or read book American Doctoral Dissertations written by and published by . This book was released on 1996 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1997 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Semiconductor Nanostructures for Optoelectronic Applications written by Todd D. Steiner and published by Artech House. This book was released on 2004 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Tiny structures measurable on the nanometer scale (one-billionth of a meter) are known as nanostructures, and nanotechnology is the emerging application of these nanostructures into useful nanoscale devices. As we enter the 21st century, more and more professional are using nanotechnology to create semiconductors for a variety of applications, including communications, information technology, medical, and transportation devices. Written by today's best researchers of semiconductor nanostructures, this cutting-edge resource provides a snapshot of this exciting and fast-changing field. The book covers the latest advances in nanotechnology and discusses the applications of nanostructures to optoelectronics, photonics, and electronics.

Download or read book Sensing and Monitoring Technologies for Mines and Hazardous Areas written by Swadesh Chaulya and published by Elsevier. This book was released on 2016-06-10 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensing and Monitoring Technologies for Mines and Hazardous Areas: Monitoring and Prediction Technologies presents the fundamentals of mining related geotechnical risk and how the latest advances in sensing and data communication can be used both to prevent accidents and provide early warnings. Opencast mining operations involve huge quantities of overburden removal, dumping, and backfilling in excavated areas. Substantial increases in the rate of accumulation of waste dumps in recent years has resulted in greater height of dumps and also has given rise to the danger of dump failures as steeper open pit slopes are prone to failure. These failures lead to loss of valuable human lives and damage to mining machinery. This book presents the most recent advances in gas sensors, methane detectors, and power cut-off systems. It also introduces monitoring of the gas strata and environment, and an overview of the use of Internet of Things and cloud computing for mining sensing and surveillance purposes. Targeted at geotechnical and mining engineers, this volume covers the latest findings and technology to prevent mining accidents and mitigate the inherent risk of the activity. - Presents complete details of a real-time slope stability monitoring system using wireless sensor networking and prediction technique based on multivariate statistical analysis of various parameters and analytical hierarchy process methods - Discusses innovative ideas and new concepts of sensing technologies, mine transport surveillance, digital mining, and cloud computing to improve safety and productivity in mining industry - Includes slope stability prediction software, downloadable through a companion website, which can be used for monitoring, analyzing, and storing different sensors and providing audio-visual, SMS, and email alerts - Covers the latest findings and technology to prevent mining accidents and mitigate the inherent risk

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Laser Ablation in Liquids written by Guowei Yang and published by CRC Press. This book was released on 2012-02-22 with total page 1166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the fundamental concepts and physical and chemical aspects of pulsed laser ablation of solid targets in liquid environments and its applications in the preparation of nanomaterials and fabrication of nanostructures. The areas of focus include basic thermodynamic and kinetic processes of laser ablation in liquids, and its applic

Download or read book Compound Semiconductor Photonics written by Chua Soo-Jin and published by CRC Press. This book was released on 2020-03-26 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceeding is a collection of selected papers presented at Symposium O of Compound Semiconductor Photonics in the International Conference on Materials for Advanced Technology (ICMAT), which was held in Singapore from 28 June to 3 July 2009. The symposium covers a wide range of topics from fundamental semiconductor materials study to photonic device fabrication and application. The papers collected are of recent progress in the active and wide range of semiconductor photonics research. They include materials-related papers on III-As/P, III-nitride, quantum dot/wire/dash growth, ZnO, and chalcogenide, and devices-related papers on photonic crystals, VCSEL, quantum dot/dash lasers, LEDs, waveguides, solar cells and heterogeneous integrat

Download or read book Low Dimensional Structures in Semiconductors written by A.R. Peaker and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a sequence of reviews presented at the NATO Advanced Study Institute on 'Low Dimensional Structures in Semiconductors ... from Basic Physics to Applications.' This was part of the International School of Materials Science and 1990 at the Ettore Majorana Centre in Sicily. Technology held in July Only a few years ago, Low Dimensional Structures was an esoteric concept, but now it is apparent they are likely to playa major role in the next generation of electronic devices. The theme of the School acknowledged this rapidly developing maturity.' The contributions to the volume consider not only the essential physics, but take a wider view of the topic, starting from material growth and processing, then prog ressing right through to applications with some discussion of the likely use of low dimensional devices in systems. The papers are arranged into four sections, the first of which deals with basic con cepts of semiconductor and low dimensional systems. The second section is on growth and fabrication, reviewing MBE and MOVPE methods and discussing the achievements and limitations of techniques to reduce structures into the realms of one and zero dimensions. The third section covers the crucial issue of interfaces while the final section deals with devices and device physics.

Download or read book Descriptive Inorganic Chemistry written by James E. House and published by Academic Press. This book was released on 2010-09-22 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descriptive Inorganic Chemistry, Second Edition, covers the synthesis, reactions, and properties of elements and inorganic compounds for courses in descriptive inorganic chemistry. This updated version includes expanded coverage of chemical bonding and enhanced treatment of Buckminster Fullerenes, and incorporates new industrial applications matched to key topics in the text. It is suitable for the one-semester (ACS-recommended) course or as a supplement in general chemistry courses. Ideal for majors and non-majors, the book incorporates rich graphs and diagrams to enhance the content and maximize learning. - Includes expanded coverage of chemical bonding and enhanced treatment of Buckminster Fullerenes - Incorporates new industrial applications matched to key topics in the text

Download or read book VLSI Fabrication Principles written by Sorab Khushro Ghandhi and published by John Wiley & Sons. This book was released on 1983 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully updated with the latest technologies, this edition covers the fundamental principles underlying fabrication processes for semiconductor devices along with integrated circuits made from silicon and gallium arsenide. Stresses fabrication criteria for such circuits as CMOS, bipolar, MOS, FET, etc. These diverse technologies are introduced separately and then consolidated into complete circuits. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Introduction to Nanophotonics written by Sergey V. Gaponenko and published by Cambridge University Press. This book was released on 2010-04-08 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanophotonics is where photonics merges with nanoscience and nanotechnology, and where spatial confinement considerably modifies light propagation and light-matter interaction. Describing the basic phenomena, principles, experimental advances and potential impact of nanophotonics, this graduate-level textbook is ideal for students in physics, optical and electronic engineering and materials science. The textbook highlights practical issues, material properties and device feasibility, and includes the basic optical properties of metals, semiconductors and dielectrics. Mathematics is kept to a minimum and theoretical issues are reduced to a conceptual level. Each chapter ends in problems so readers can monitor their understanding of the material presented. The introductory quantum theory of solids and size effects in semiconductors are considered to give a parallel discussion of wave optics and wave mechanics of nanostructures. The physical and historical interplay of wave optics and quantum mechanics is traced. Nanoplasmonics, an essential part of modern photonics, is also included.

Download or read book Optics in Our Time written by Mohammad D. Al-Amri and published by Springer. This book was released on 2016-12-12 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light and light based technologies have played an important role in transforming our lives via scientific contributions spanned over thousands of years. In this book we present a vast collection of articles on various aspects of light and its applications in the contemporary world at a popular or semi-popular level. These articles are written by the world authorities in their respective fields. This is therefore a rare volume where the world experts have come together to present the developments in this most important field of science in an almost pedagogical manner. This volume covers five aspects related to light. The first presents two articles, one on the history of the nature of light, and the other on the scientific achievements of Ibn-Haitham (Alhazen), who is broadly considered the father of modern optics. These are then followed by an article on ultrafast phenomena and the invisible world. The third part includes papers on specific sources of light, the discoveries of which have revolutionized optical technologies in our lifetime. They discuss the nature and the characteristics of lasers, Solid-state lighting based on the Light Emitting Diode (LED) technology, and finally modern electron optics and its relationship to the Muslim golden age in science. The book’s fourth part discusses various applications of optics and light in today's world, including biophotonics, art, optical communication, nanotechnology, the eye as an optical instrument, remote sensing, and optics in medicine. In turn, the last part focuses on quantum optics, a modern field that grew out of the interaction of light and matter. Topics addressed include atom optics, slow, stored and stationary light, optical tests of the foundation of physics, quantum mechanical properties of light fields carrying orbital angular momentum, quantum communication, and Wave-Particle dualism in action.

Download or read book Nitride Semiconductor Light Emitting Diodes LEDs written by Jian-Jang Huang and published by Woodhead Publishing. This book was released on 2014-02-14 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of nitride-based light-emitting diodes (LEDs) has led to advancements in high-brightness LED technology for solid-state lighting, handheld electronics, and advanced bioengineering applications. Nitride Semiconductor Light-Emitting Diodes (LEDs) reviews the fabrication, performance, and applications of this technology that encompass the state-of-the-art material and device development, and practical nitride-based LED design considerations. Part one reviews the fabrication of nitride semiconductor LEDs. Chapters cover molecular beam epitaxy (MBE) growth of nitride semiconductors, modern metalorganic chemical vapor deposition (MOCVD) techniques and the growth of nitride-based materials, and gallium nitride (GaN)-on-sapphire and GaN-on-silicon technologies for LEDs. Nanostructured, non-polar and semi-polar nitride-based LEDs, as well as phosphor-coated nitride LEDs, are also discussed. Part two covers the performance of nitride LEDs, including photonic crystal LEDs, surface plasmon enhanced LEDs, color tuneable LEDs, and LEDs based on quantum wells and quantum dots. Further chapters discuss the development of LED encapsulation technology and the fundamental efficiency droop issues in gallium indium nitride (GaInN) LEDs. Finally, part three highlights applications of nitride LEDs, including liquid crystal display (LCD) backlighting, infrared emitters, and automotive lighting. Nitride Semiconductor Light-Emitting Diodes (LEDs) is a technical resource for academics, physicists, materials scientists, electrical engineers, and those working in the lighting, consumer electronics, automotive, aviation, and communications sectors. - Reviews fabrication, performance, and applications of this technology that encompass the state-of-the-art material and device development, and practical nitride-based LED design considerations - Covers the performance of nitride LEDs, including photonic crystal LEDs, surface plasmon enhanced LEDs, color tuneable LEDs, and LEDs based on quantum wells and quantum dots - Highlights applications of nitride LEDs, including liquid crystal display (LCD) backlighting, infra-red emitters, and automotive lighting

Download or read book Semiconductor Device Reliability written by A. Christou and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a compilation of papers presented at the Semiconductor Device Reliabi lity Workshop sponsored by the NATO International Scientific Exchange Program. The Workshop was held in Crete, Greece from June 4 to June 9, 1989. The objective of the Workshop was to review and to further explore advances in the field of semiconductor reliability through invited paper presentations and discussions. The technical emphasis was on quality assurance and reliability of optoelectronic and high speed semiconductor devices. The primary support for the meeting was provided by the Scientific Affairs Division of NATO. We are indebted to NATO for their support and to Dr. Craig Sinclair, who admin isters this program. The chapters of this book follow the format and order of the sessions of the meeting. Thirty-six papers were presented and discussed during the five-day Workshop. In addi tion, two panel sessions were held, with audience participation, where the particularly controversial topics of bum-in and reliability modeling and prediction methods were dis cussed. A brief review of these sessions is presented in this book.

Download or read book Molecular Beam Epitaxy written by Robin F.C. Farrow and published by Elsevier. This book was released on 1995-12-31 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this volume, the editor and contributors describe the use of molecular beam epitaxy (MBE) for a range of key materials systems that are of interest for both technological and fundamental reasons. Prior books on MBE have provided an introduction to the basic concepts and techniques of MBE and emphasize growth and characterization of GaAs-based structures. The aim in this book is somewhat different; it is to demonstrate the versatility of the technique by showing how it can be utilized to prepare and explore a range of distinct and diverse materials. For each of these materials systems MBE has played a key role both in their development and application to devices.

Download or read book Nanocrystal Quantum Dots written by Victor I. Klimov and published by CRC Press. This book was released on 2017-12-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of recent advancements in colloidal nanocrystals and quantum-confined nanostructures, Nanocrystal Quantum Dots is the second edition of Semiconductor and Metal Nanocrystals: Synthesis and Electronic and Optical Properties, originally published in 2003. This new title reflects the book’s altered focus on semiconductor nanocrystals. Gathering contributions from leading researchers, this book contains new chapters on carrier multiplication (generation of multiexcitons by single photons), doping of semiconductor nanocrystals, and applications of nanocrystals in biology. Other updates include: New insights regarding the underlying mechanisms supporting colloidal nanocrystal growth A revised general overview of multiexciton phenomena, including spectral and dynamical signatures of multiexcitons in transient absorption and photoluminescence Analysis of nanocrystal-specific features of multiexciton recombination A review of the status of new field of carrier multiplication Expanded coverage of theory, covering the regime of high-charge densities New results on quantum dots of lead chalcogenides, with a focus studies of carrier multiplication and the latest results regarding Schottky junction solar cells Presents useful examples to illustrate applications of nanocrystals in biological labeling, imaging, and diagnostics The book also includes a review of recent progress made in biological applications of colloidal nanocrystals, as well as a comparative analysis of the advantages and limitations of techniques for preparing biocompatible quantum dots. The authors summarize the latest developments in the synthesis and understanding of magnetically doped semiconductor nanocrystals, and they present a detailed discussion of issues related to the synthesis, magneto-optics, and photoluminescence of doped colloidal nanocrystals as well. A valuable addition to the pantheon of literature in the field of nanoscience, this book presents pioneering research from experts whose work has led to the numerous advances of the past several years.

Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.