Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Surface Chemistry and Catalysis written by Albert F. Carley and published by Springer Science & Business Media. This book was released on 2002-09-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exciting results are still emerging from the many research groups working in this fertile area and the book is an excellent stimulus to researchers at the start of the 21st century."--BOOK JACKET.
Download or read book Catalytic and Process Study of the Selective Hydrogenation of Acetylene and 1 3 Butadiene written by Ruijun Hou and published by Springer. This book was released on 2017-01-05 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis offers novel methods for catalyst and process design for the selective hydrogenation of acetylene and 1,3-butadiene. The author predicts the properties of supported Pd–Ni bimetallic catalysts using density functional theory (DFT) calculations and temperature-programmed desorption (TPD). The excellent correlation between model surfaces and supported catalysts demonstrates the feasibility of designing effective bimetallic catalysts for selective hydrogenation reactions. The author also proposes a method for designing non-precious metal catalysts to replace precious metals. She modifies the process of selective hydrogenation of acetylene by coupling the selective adsorption to the selective hydrogenation in the liquid phase, as a result of which the ethylene selectivity is greatly improved and heat transfer is greatly enhanced. Lastly, by analyzing the mechanism of liquid-phase hydrogenation, the author proposes a multi-stage slurry bed reactor for industrial applications.“/p>
Download or read book Multiscale and Innovative Kinetic Approaches in Heterogeneous Catalysis written by Pascal Granger and published by MDPI. This book was released on 2019-07-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kinetics and reactor modeling for heterogeneous catalytic reactions are prominent tools for investigating and understanding catalyst functionalities at nanoscale and the related rates of complex reaction networks. This book illustrates some examples related to the transformation of simple to more complex feedstocks, including different types of reactor designs, i.e., steady-state, transient plug flow reactors, and TAP reactors for which there is sometimes a strong gap in the operating conditions from ultra-high-vacuum to high-pressure conditions. In conjunction, new methodologies have emerged, giving rise to more robust microkinetics models. As exemplified, they include the kinetics and the dynamics of the reactors and span a large range of length and time scales. The objective of this Special Issue is to provide contributions that can illustrate recent advances and novel methodologies for elucidating the kinetics of heterogeneous reactions and the necessary multiscale approach for optimizing the reactor design. This book is dedicated to postgraduate and scientific researchers, and experts in heterogeneous catalysis. It may also serve as a source of original information for the elaboration of lessons on catalysis for Master students.
Download or read book Bulgarian Academic Books written by Bŭlgarska akademii͡a na naukite and published by . This book was released on 1981 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three phase Catalytic Reactors written by P. A. Ramachandran and published by Gordon & Breach Publishing Group. This book was released on 1983 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geterogenny kataliz written by and published by . This book was released on 1983 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selectivity in Catalysis written by Mark E. Davis and published by . This book was released on 1993 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses recent research and provides tutorial chapters on enhancing selectivity in catalysis through stereoselectivity, reaction pathway control, shape selectivity, and alloys and clusters. Presents an interdisciplinary approach to increasing selectivity in homogeneous and heterogeneous catalysis research. Includes an overview chapter that discusses the current state of the field and offers a perspective on future directions.
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. - Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques - Presents key applications, including biomedical, energy, electronic and environmental - Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Heterogenous Catalysis written by and published by . This book was released on 1983 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Platinum Metals Review written by and published by . This book was released on 1978 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supported Metal Single Atom Catalysis written by Philippe Serp and published by Wiley-VCH. This book was released on 2022-02-22 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: b”Supported Metal Single Atom CatalysisCovers all key aspects of supported metal single atom catalysts, an invaluable resource for academic researchers and industry professionals alike Single atom catalysis is one of the most innovative and dynamic research areas in catalysis science. Supported metal catalysts are used extensively across the chemical industry, ranging from fine and bulk chemical production to petrochemicals. Single atom catalysts (SACs) combine the advantages of both homogeneous and heterogeneous catalysts such as catalyst stability, activity, and high dispersion of the active phase. Supported Metal Single Atom Catalysis provides an authoritative and up-to-date overview of the emerging field, covering the synthesis, preparation, characterization, modeling, and applications of SACs. This comprehensive volume introduces the basic principles of single atom catalysis, describes metal oxide and carbon support materials for SAC preparation, presents characterization techniques and theoretical calculations, and discusses SACs in areas including selective hydrogenation, oxidation reactions, activation of small molecules, C-C bond formation, and biomedical applications. Highlights the activity, selectivity, and stability advantages of supported metal SACs compared to other heterogeneous catalysts Covers applications of SACs in thermal catalysis, electrocatalysis, and photocatalysis Includes chapters on single atom alloys and supported double and triple metal atom catalysts Discusses the prospects, challenges, and potential industrial applications of SACs Supported Metal Single Atom Catalysis is an indispensable reference for all those working in the fields of catalysis, solid-state chemistry, materials science, and spectroscopy, including catalytic chemists, organic chemists, electrochemists, theoretical chemists, and industrial chemists.
Download or read book Catalytic Hydrogenation written by L. Cervený and published by Elsevier. This book was released on 1986-08-01 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of contributions in this volume presents the most up-to-date findings in catalytic hydrogenation. The individual chapters have been written by 36 top specialists each of whom has achieved a remarkable depth of coverage when dealing with his particular topic. In addition to detailed treatment of the most recent problems connected with catalytic hydrogenations, the book also contains a number of previously unpublished results obtained either by the authors themselves or within the organizations to which they are affiliated.Because of its topical and original character, the book provides a wealth of information which will be invaluable not only to researchers and technicians dealing with hydrogenation, but also to all those concerned with homogeneous and heterogeneous catalysis, organic technology, petrochemistry and chemical engineering.
Download or read book Chemisorption and Reactivity on Supported Clusters and Thin Films written by R.M. Lambert and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous catalysis provides the backbone of the world's chemical and oil industries. The innate complexity of practical catalytic systems suggests that useful progress should be achievable by investigating key aspects of catalysis by experimental studies on idealised model systems. Thin films and supported clusters are two promising types of model system that can be used for this purpose, since they mimic important aspects of the properties of practical dispersed catalysts. Similarly, appropriate theoretical studies of chemisorption and surface reaction clusters or extended slab systems can provide valuable information on the factors that underlie bonding and catalytic activity. This volume describes such experimental and theoretical approaches to the surface chemistry and catalytic behaviour of metals, metal oxides and metal/metal oxide systems. An introduction to the principles and main themes of heterogeneous catalysis is followed by detailed accounts of the application of modern experimental and theoretical techniques to fundamental problems. The application of advanced experimental methods is complemented by a full description of theoretical procedures, including Hartree-Fock, density functional and similar techniques. The relative merits of the various approaches are considered and directions for future progress are indicated.
Download or read book Glass written by Horst Scholze and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it was learned that Professor Scholze was revising his classic work on the nature, structure, and properties of glass, it was natural to conceive the idea of translating the new edition into English. Professor Scholze enthusiastically endorsed this suggestion and asked for the concurrence of his publisher, Springer-Verlag. Springer-Verlag welcomed the idea and readily agreed to provide support. With the essential agreements in place, Professor Michael Lakin, Professor of German at Alfred University, was asked to do the transla tion, and I subsequently agreed to work with Professor Lakin to check for technical accuracy. I was happy to accept this task because of my respect for Professor Scholze and because of the value to glass scientists and engineers of having available an English edition of Glas. Professor Scholze died before publication ofthis English edition of his work. However, he had reviewed the entire English text and had approved it. Professor Lakin and I appreciated the confidence he placed in us, and we were gratified with his acceptance of our efforts. His scientific contributions were numerous and important; they will long serve as guideposts for research in many key areas. We hope this translation of Glas will help make his legacy accessible to more people. Professor Lakin and I have tried to provide a translation that is accurate and true to the original but that has a distinctive English "flavor"; that is, it is not just a literal translation.
Download or read book Bimetallic Catalysts written by John H. Sinfelt and published by Wiley-Interscience. This book was released on 1983-09-29 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an account of the research on bimetallic catalysts. Focuses attention on the possibility of influencing the selectivity of chemical transformations on metal surfaces and preparing metal alloys in a highly dispersed state. Covers the validation and elucidation of the bimetallic cluster concept. Includes figures and tables.
