Download or read book Selection of Cohesion and Friction Parameters for Slope Stability Analysis in Fissured Plastic Clays written by James Stanley Betke (University of Manitoba student) and published by . This book was released on 2001 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Slope Stability Analysis of a Fissured Glacial Clay written by Byron G. Walker and published by . This book was released on 1966 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A slope in an over-consolidated, fissured clay was analyzed by the Swedish Method of Slices. Values of cohesion (c) and angles of friction (Ø) were determined by three different types of direct shear tests (undrained, drained and residual). Factors of safety (functions of c and Ø) indicated that the direct shear test parameter gave a factor of safety approximately four times that represented by failure conditions in the field. Drained tests gave a factor of safety nearly 2.3 times the value represented by field conditions. The conclusion is made that these two tests are of limited value for slope stability analyses in stiff fissured clays. The residual strength tests gave factors of safety values close to those represented by field conditions (1.2 and 1.1 versus 1.0 - 0.8 and 0.6 versus 1.0 for a theory modification). Further studies are required to evaluate the residual shear strength approach as a general method of analysis"--Abstract, leaf ii.

Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.

Download or read book Clay and Shale Slope Instability written by William C. Haneberg and published by Geological Society of America. This book was released on 1995 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ten papers address both empirical and analytical aspects of clay and shale slope instability. Among the topics discussed in detail are: limit equilibrium stability analysis, shear strength of clay and clayey colluvium, use of triaxial test data to evaluate viscoplastic slope movements, numerical modeling of pore pressure distribution in heterogeneous soils, rational analysis of rainfall and landslide movement patterns, the effects of hydrothermal alteration on slope stability, mudrock durability and stability considerations, and regional clay and shale slope stability problems in Italy.

Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.

Download or read book Slope Stability and Stabilization Methods written by Lee W. Abramson and published by John Wiley & Sons. This book was released on 2001-11-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: A major revision of the comprehensive text/reference Written by world-leading geotechnical engineers who share almost 100 years of combined experience, Slope Stability and Stabilization, Second Edition assembles the background information, theory, analytical methods, design and construction approaches, and practical examples necessary to carry out a complete slope stability project. Retaining the best features of the previous edition, this new book has been completely updated to address the latest trends and methodology in the field. Features include: All-new chapters on shallow failures and stability of landfill slopes New material on probabilistic stability analysis, cost analysis of stabilization alternatives, and state-of-the-art techniques in time-domain reflectometry to help engineers plan and model new designs Tested and FHA-approved procedures for the geotechnical stage of highway, tunnel, and bridge projects Sound guidance for geotechnical stage design and planning for virtually all types of construction projects Slope Stability and Stabilization, Second Edition is filled with current and comprehensive information, making it one of the best resources available on the subject-and an essential reference for today's and tomorrow's professionals in geology, geotechnical engineering, soil science, and landscape architecture.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1969 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Canadian Geotechnical Journal written by and published by . This book was released on 2004 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Evaluation of Soil and Rock Properties written by P. J. Sabatini and published by . This book was released on 2004-10-01 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents state-of-the-practice information on the evaluation of soil and rock properties for geotechnical design applications. This document addresses the entire range of materials potentially encountered in highway engineering practice, from soft clay to intact rock and variations of materials that fall between these two extremes. Information is presented on parameters measured, evaluation of data quality, and interpretation of properties for conventional soil and rock laboratory testing, as well as in situ devices such as field vane testing, cone penetration testing, dilatometer, pressuremeter, and borehole jack. This document provides the design engineer with information that can be used to develop a rationale for accepting or rejecting data and for resolving inconsistencies between data provided by different laboratories and field tests. This document also includes information on: (1) the use of Geographical Information Systems (GIS) and Personal Data Assistance devices for the collection and interpretation of subsurface information; (2) quantitative measures for evaluating disturbance of laboratory soil samples; and (3) the use of measurements from geophysical testing techniques to obtain information on the modulus of soil. Also included are chapters on evaluating properties of special soil materials (e.g., loess, cemented sands, peats and organic soils, etc.) and the use of statistical information in evaluating anomalous data and obtaining design values for soil and rock properties. An appendix of three detailed soil and rock property selection examples is provided which illustrate the application of the methods described in the document.

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Download or read book Selected Papers on Soil Mechanics written by A. W. Skempton and published by Thomas Telford. This book was released on 1984 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of papers by Professor AW Skempton, aiming to show his breadth of achievement in the field of soilmechanics. The chosen papers are reproduced chronologically, most of them falling into three subject groups: soil properties, stability of slopes, and foundations. This collection is useful to engineers, research workers, and students.

Download or read book Soil Mechanics for Unsaturated Soils written by Delwyn G. Fredlund and published by John Wiley & Sons. This book was released on 1993-09-06 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principles and concepts for unsaturated soils are developed as extensions of saturated soils. Addresses problems where soils have a matric suction or where pore-water pressure is negative. Covers theory, measurement and use of the fundamental properties of unsaturated soils--permeability, shear strength and volume change. Includes a significant amount of case studies.

Download or read book Rock Slope Engineering written by Duncan C. Wyllie and published by CRC Press. This book was released on 2017-09-18 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Slope Engineering covers the investigation, design, excavation and remediation of man-made rock cuts and natural slopes, primarily for civil engineering applications. It presents design information on structural geology, shear strength of rock and ground water, including weathered rock. Slope design methods are discussed for planar, wedge, circular and toppling failures, including seismic design and numerical analysis. Information is also provided on blasting, slope stabilization, movement monitoring and civil engineering applications. This fifth edition has been extensively up-dated, with new chapters on weathered rock, including shear strength in relation to weathering grades, and seismic design of rock slopes for pseudo-static stability and Newmark displacement. It now includes the use of remote sensing techniques such as LiDAR to monitor slope movement and collect structural geology data. The chapter on numerical analysis has been revised with emphasis on civil applications. The book is written for practitioners working in the fields of transportation, energy and industrial development, and undergraduate and graduate level courses in geological engineering.

Download or read book The Encyclopedia of Applied Geology written by Charles W. Finkl and published by Springer. This book was released on 1984-07-31 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Applied Geology is an international compendium of engineering geology topics prepared by experts from many countries. The volume contains more than eighty main entries in alphabetical order, dealing with hydrology, rock structure monitoring and soil mechanics in addition to engineering geology. Special topics focus on earth science information and sources, electrokinetics, forensic geology, geocryology, nuclear plant siting, photogrammetry, tunnels and tunnelling, urban geomorphology and well data systems.

Download or read book GeoCongress 2012 Geotechnical Special Publication GSP 225 written by Roman D. Hryciw and published by Amer Society of Civil Engineers. This book was released on 2012-03-25 with total page 4500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Landslide Dynamics ISDR ICL Landslide Interactive Teaching Tools written by Kyoji Sassa and published by Springer. This book was released on 2018-01-31 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interactive book presents comprehensive information on the fundamentals of landslide types and dynamics, while also providing a set of PPT, PDF, and text tools for education and capacity development. It is the second part of a two-volume work created as the core activity of the Sendai Partnerships, the International Consortium of Landslides. The book will be regularly updated and improved over the coming years, based on responses from users and lessons learned during its application.

Download or read book The Delft Sand Clay and Rock Cutting Model written by S.A. Miedema and published by IOS Press. This book was released on 2014-10-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock. Small blade angles and large blade angles are discussed for each soil type, and for each case considered the equations/model for cutting forces, power and specific energy are given. With models verified by laboratory research, principally from the Delft University of Technology, and data from other recognized sources, this book will prove an invaluable reference for anybody whose work involves major excavations of any kind.