Download or read book Selection and Use of Wear Tests for Coatings written by Raymond George Bayer and published by ASTM International. This book was released on 1982 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and use of wear tests for coatings are discussed. Coated materials are vastly different and more complicated than uncoated or monolithic materials. It is therefore necessary to characterize the coating and the coating/substrate interface in terms of physicochemical and mechanical properties. Wear is a multi-faceted phenomena. Various tests used to study the wear properties of coatings are described. They include tests for adhesive wear, abrasive wear, impact erosion wear, and fatigue wear.
Download or read book Surface Coatings for Protection Against Wear written by B G Mellor and published by Woodhead Publishing. This book was released on 2006-05-30 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wear is a surface or near surface phenomenon it has long been realised that the wear resistance of a component can be improved by providing a surface of different composition from the bulk material. Although this book concentrates on surface coatings, the distinction between surface coatings and the process of modifying the surface by changing its composition is not always clear, so some useful surface modification techniques are also considered.Surface coatings for protection against wear, consists of twelve chapters written by different authors, experts in their field. After a brief introductory chapter wear phenomena and the properties required from a coating are addressed. Chapter three covers coating characterisation and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings. The next chapter provides an introduction to the various methods available to deposit wear resistant coatings. The following six chapters describe in detail wear resistant coatings produced by various deposition routes. Emphasis is placed on the microstructure property relationship in these coatings. Chapter eleven addresses coatings and hardfacings, produced from welding processes, specifically modern developments such as friction surfacing and pulsed electrode surfacing techniques. The final chapter is dedicated to future trends in both coating materials and coating processes.Surface coatings for protection against wear is essential for anyone involved in selecting coatings and processes and will be an invaluable reference resource for all engineers and students concerned with the latest developments in coatings technology. - Essential for anyone involved in selecting coatings and processes, engineers and students - Written by an international team of experts in the field
Download or read book Tribology and Characterization of Surface Coatings written by Sarfraj Ahmed and published by John Wiley & Sons. This book was released on 2022-01-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.
Download or read book Selection and use of wear tests for metals written by R. G. Bayer and published by ASTM International. This book was released on 1976 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-14 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A fully updated version of the popular Introduction to Tribology, the second edition of this leading tribology text introduces the major developments in the understanding and interpretation of friction, wear and lubrication. Considerations of friction and wear have been fully revised to include recent analysis and data work, and friction mechanisms have been reappraised in light of current developments. In this edition, the breakthroughs in tribology at the nano- and micro- level as well as recent developments in nanotechnology and magnetic storage technologies are introduced. A new chapter on the emerging field of green tribology and biomimetics is included. Introduces the topic of tribology from a mechanical engineering, mechanics and materials science points of view Newly updated chapter covers both the underlying theory and the current applications of tribology to industry Updated write-up on nanotribology and nanotechnology and introduction of a new chapter on green tribology and biomimetics
Download or read book Testing of Metallic and Inorganic Coatings written by William B. Harding and published by ASTM International. This book was released on 1987 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coatings are tested to confirm compliance with specifications, to monitor the operation of a coating process, and to evaluate coatings for various services. The ability of a coating to perform as intended usually depends on several characteristics, and the testing of a coating usually involves several different tests. At first glance the nature of a characteristic that is being tested may seem clear and the results of a test may seem to be unambiguous, however, the nature of a characteristic my be more complex than realized and the ability of a test to measure the characteristic may be less than expected. The members of the ASTM Committee B-8 on Metallic and Inorganic Coatings felt it was desirable to organize a symposium on the testing of the metallic and inorganic coatings so as to bring these problems to the attention of practitioners. This publication is based on the symposium, which was presented in Chicago on April 14 and 15, 1986.
Download or read book Coatings Tribology written by K. Holmberg and published by Elsevier. This book was released on 1994-07-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.
Download or read book A Guide to Wear Problems and Testing for Industry written by Michael Neale and published by William Andrew. This book was released on 2001-12-31 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machine component wear is one of the costliest problems within industry. In fact, a 1997 survey in the UK placed wear costs at 25% of turnover, or approximately $1 billion. In many cases, making design and or material changes can reduce this cost by 50% or more! This handbook reviews component wear, and guides the reader through solutions to wear problems, testing methods for materials and wear mechanisms, and information on wear performance of different materials for components. The bottom line is that it helps to reduce ""the bottom line"" removing risks associated with changes to machinery.This book is based on practical use. It outlines the following practices: reviews of wear mechanisms that occur in various types of machinery and solutions to industrial wear problems; guides to relative wear performance of different component materials; comparison of the wear performance of those materials; reviews of laboratory tests to simulate wear, and selection of appropriate tests; identification of improved materials, and; examination of worn surfaces.
Download or read book Mechanical Wear Fundamentals and Testing Revised and Expanded written by Raymond J. Bayer and published by CRC Press. This book was released on 2004-04-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a tribological expert with more than thirty years of experience in the field, Mechanical Wear Fundamentals and Testing, Second Edition compiles an extensive range of graphs, tables, micrographs, and drawings to illustrate wear, friction, and lubrication behavior in modern engineering applications. The author promotes a clear understandin
Download or read book Wear tests for plastics written by R. G. Bayer and published by ASTM International. This book was released on 1980 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Friction Wear and Erosion Testing written by Kenneth G. Budinski and published by . This book was released on 2007 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: THIS GUIDE DISCUSSED THE MOST WIDELY USED wear tests and, to end this book, industrial case histories will be presented to try to convince readers to use these tests to solve problems and to perform research studies. The chapter goal is readers who recognize that bench tests are a fast, costeffective approach to solving tribological problems.
Download or read book Principles and Applications of Tribology written by Bharat Bhushan and published by John Wiley & Sons. This book was released on 2013-02-15 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated Second Edition provides the reader with the solid understanding of tribology which is essential to engineers involved in the design of, and ensuring the reliability of, machine parts and systems. It moves from basic theory to practice, examining tribology from the integrated viewpoint of mechanical engineering, mechanics, and materials science. It offers detailed coverage of the mechanisms of material wear, friction, and all of the major lubrication techniques - liquids, solids, and gases - and examines a wide range of both traditional and state-of-the-art applications. For this edition, the author has included updates on friction, wear and lubrication, as well as completely revised material including the latest breakthroughs in tribology at the nano- and micro- level and a revised introduction to nanotechnology. Also included is a new chapter on the emerging field of green tribology and biomimetics.
Download or read book Characterization of Biomaterials written by Mangal Roy and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: In joint replacement surgery with suboptimal bone, allograft materials are often used to achieve biological fixation of the metallic implant to the host bone and reducing the implant fixation time. The most commonly used techniques are cemented and hydroxyapatite (HA)-coated metallic implants. Typically, HA coatings are suggested for patients with better bone stock, whereas recommended implant fixation process for most other osteoporotic patients is bone cements. In general, there is a long-standing need to improve the performance of hip and other devices for longer in vivo implant lifetime that can help in reducing the number of revision surgeries, as well as minimizing physical and mental trauma to the patient. To achieve these goals, it is important to understand the mechanical and biological properties of coatings that can influence not only its short- and long-term bioactivity but also life span in vivo. Over the years, it has been recognized that the stability of a coated implant is governed by its physical and mechanical properties. A coating that separates from the implant provides no advantage over an uncoated implant and undesirable due to problems with debris materials, which can lead to osteolysis. Therefore, it is important to properly characterize the coated implants in terms of its physical and mechanical properties. In this chapter, specific details on coating characterization techniques including sample dimensions, sample preparation, experimental procedure and data interpretation are discussed. In particular, the standards and requirements of regulatory organizations are presented elucidating the significance and use of each characterization. It is important to appreciate that mechanical properties of coatings can only be determined with certain coating specification such as coating thickness. This chapter is designed even for non-experts to follow mechanical property characterizations of coatings on medical implants.
Download or read book Optical Interferograms Reduction and Interpretation written by Arthur Henry Guenther and published by ASTM International. This book was released on 1978 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Physical Testing of Paper written by Jens Borch and published by CRC Press. This book was released on 2001-09-25 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook focuses on physical paper testing in the laboratory and online. Divided into five parts, it highlights assays for paper interactions with light, moisture, electricity, and heat. Topics expanded upon include laboratory testing procedures; microscopy analysis and paper surface properties; liquid and gas penetration; electrical and thermal interactions; and methods of surface characterization.
Download or read book Principles of Engineering Tribology written by Ahmed Abdelbary and published by Elsevier. This book was released on 2023-05-26 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Engineering Tribology: Fundamentals and Applications introduces readers to the core theories and fundamentals of the field, its basic terminology and concepts, as well as advanced topics such as the tribological properties of various engineering surfaces, roughness measurements, and the mechanics of surface contact. The fundamentals of friction and wear of metallic and non-metallic materials such as polymers, ceramics, rubbers, and composites are discussed, as are fluidic, gaseous, grease, and solid media lubrication techniques. In addition, the properties of lubricants and various types of additives incorporated are discussed, along with a methodology for conducting friction, wear and lubrication laboratory testing and an overview of simulation and modeling methods for various tribosystems. Case studies and applications are featured throughout, with a particular emphasis on analyzing failure modes of tribosystems. - Introduces the basic concepts of tribology, building a comprehensive understanding for readers and then covering more advanced topics - Discusses tribological properties of various engineering surfaces, roughness measurements, and mechanics of surface contact - Covers more advanced topics such as fluidic, gaseous, grease, and solid media lubricants, methods for conducing friction and wear laboratory tests, and more - Includes a wide-range of both traditional and state-of-the-art applications and case studies
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
