Download or read book Selected Papers from 27th European Biomass Conference Exhibition EUBCE 2019 written by David Baxter and published by MDPI. This book was released on 2021-09-02 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws together a small selection of full-length papers based on presentations given at the 27th European Biomass Conference and Exhibition held in Lisbon, Portugal in 2019. The topics covered, which reflect the breadth of the program of the EUBCE conference itself, include biomass sources, various aspects of technologies used for the conversion of biomass to bioproducts and bioenergy, as well as different approaches to assessing environmental impacts, which include case studies based on different technologies in use in a range of countries.
Download or read book Selected Papers from 27th European Biomass Conference Exhibition EUBCE 2019 written by David Baxter and published by . This book was released on 2021 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws together a small selection of full-length papers based on presentations given at the 27th European Biomass Conference and Exhibition held in Lisbon, Portugal in 2019. The topics covered, which reflect the breadth of the program of the EUBCE conference itself, include biomass sources, various aspects of technologies used for the conversion of biomass to bioproducts and bioenergy, as well as different approaches to assessing environmental impacts, which include case studies based on different technologies in use in a range of countries.
Download or read book Setting the Course for a Biobased Economy written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wastes Solutions Treatments and Opportunities III written by Candida Vilarinho and published by CRC Press. This book was released on 2019-08-08 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastes: Solutions, Treatments and Opportunities III contains selected papers presented at the 5th edition of the International Conference Wastes: Solutions, Treatments and Opportunities, that took place on 3-6 September 2019, in Costa da Caparica, Portugal. The Wastes conference, which takes place biennially, is a prime forum for sharing innovation, technological development and sustainable solutions for the waste management and recycling sectors around the world, counting with the participation of experts from academia and industry. The papers included in this book cover a wide range of topics, including: Wastes as construction materials; Wastes as fuels; Waste treatment technologies; MSW management; Recycling of wastes and materials recovery; Environmental, economic and social aspects in waste management; Life cycle assessment; Circular economy and wastes refineries; Logistics, policies, regulatory constraints and markets in waste management.
Download or read book Special Issue the 22nd European Biomass Conference and Exhibition written by Ralph P. Overend and published by . This book was released on 2015 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing the Global Bioeconomy written by Patrick Lamers and published by Academic Press. This book was released on 2016-05-02 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing the Global Bioeconomy: Technical, Market, and Environmental Lessons from Bioenergy brings together expertise from three IEA-Bioenergy subtasks on pyrolysis, international trade, and biorefineries to review the bioenergy sector and draw useful lessons for the full deployment of the bioeconomy. Despite the vast amount of politically driven strategies, there is little understanding on how current markets will transition towards a global bioeconomy. The question is not only how the bioeconomy can be developed, but also how it can be developed sustainably in terms of economic and environmental concerns. To answer this question, this book’s expert chapter authors seek to identify the types of biorefineries that are expected to be implemented and the types of feedstock that may be used. They also provide historical analysis of the developments of biopower and biofuel markets, integration opportunities into existing supply chains, and the conditions that would need to be created and enhanced to achieve a global biomass trade system that could support a global bioeconomy. As expectations that a future bioeconomy will rely on a series of tradable commodities, this book provides a central accounting of the state of the discussion in a multidisciplinary approach that is ideal for research and academic experts, and analysts in all areas of the bioenergy, biofuels, and bioeconomy sectors, as well as those interested in energy policy and economics. Examines the lessons learned by the bioenergy industry and how they can be applied to the full development of the bioeconomy Explores different transition strategies and how the current fossil based and future bio-based economy are intertwined Reviews the status of current biomass conversion pathways Presents an historical analysis of the developments of biopower and biofuel markets, integration opportunities into existing supply chains, and the conditions that would need to be created and enhanced to achieve a global biomass trade system
Download or read book International Bioenergy Trade written by Martin Junginger and published by Springer Science & Business Media. This book was released on 2013-10-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trade of global bioenergy commodities, such as ethanol, biodiesel and wood pellets has been growing exponentially in the past decade, and have by 2013 reached true “commodity” volumes, i.e. tens of millions of tonnes traded each year, and billions (both in US$/€) of annual turnover. IEA Bioenergy Task 40 was founded in 2004 and is now in its 4th triennium. For the past 9 years, task 40 has monitored the developments in international bioenergy trade, including the organization of about 20 workshops on trade-related topics, and the publication of over 100 studies, country reports, newsletters, etc. The amount of material produced over the years and insights gained in how biomass markets and international trade of biomass and biofuels has developed is impressive. Besides that the group has produced overviews and insights, also a large amount of practical experience has been brought together in what works and what doesn’t. Last but not least, based on all this, there are clear(er) views on how to proceed to build working sustainable international biomass markets in the future. This book compiles those lessons and insights into an easily accessible book publication.
Download or read book Innovation Outlook written by International Renewable Energy Agency (IRENA) and published by . This book was released on 2016-09-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass Utilization written by Wilfred Cote and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume represents the culmination of nearly three years of planning, organizing and carrying out of a NATO Ad vanced Study Institute on Biomass Utilization. The effort was initi ated by Dr. Harry Sobel, then Editor of Biosources Digest, and a steering committee representing the many disciplines that this field brings together. . When the fiscal and logistical details of the original plan could not be worked out, the idea was temporarily suspended. In the spring of 1982, the Renewable Materials Institute of the State University of New York at the College of Environmental Science and Forestry in Syracuse, New York revived the plan. A number of modifications had to be made, including the venue which was changed from the U.S.A. to Portugal. Additional funding beyond the basic support provided by the Scientific Affairs Division of NATO had to be obtained. Ul timately there were supplementary grants from the Foundation for Microbiology and the Anne S. Richardson Fund to assist student participants. The New York State College of Forestry Foundation, Inc. provided major support through the Renewable Ma terials Institute. The ASI was held in Alcabideche, Portugal from September 26 to October 9, 1982. Eighty participants including fifteen principal lecturers were assembled at the Hotel Sintra Estoril for the program that was organized as a comprehensive course on biomass utilization. The main lectures were supplemented by relevant short papers offered by the participants.
Download or read book Biochar written by Yong Sik Ok and published by CRC Press. This book was released on 2015-08-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing high priority research areas such as bioenergy production, global warming mitigation, and sustainable agriculture, biochar has received increased worldwide interest in the past decade.Biochar: Production, Characterization, and Applications covers the fundamentals of biochar including its concept, production technology, and characteriza
Download or read book Bioalcohol Production written by Keith W. Waldron and published by Elsevier. This book was released on 2010-05-24 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioethanol is one of the main biofuels currently used as a petroleum-substitute in transport applications. However, conflicts over food supply and land use have made its production and utilisation a controversial topic. Second generation bioalcohol production technology, based on (bio)chemical conversion of non-food lignocellulose, offers potential advantages over existing, energy-intensive bioethanol production processes. Food vs. fuel pressures may be reduced by utilising a wider range of lignocellulosic biomass feedstocks, including energy crops, cellulosic residues, and, particularly, wastes.Bioalcohol production covers the process engineering, technology, modelling and integration of the entire production chain for second generation bioalcohol production from lignocellulosic biomass. Primarily reviewing bioethanol production, the book's coverage extends to the production of longer-chain bioalcohols which will be elemental to the future of the industry.Part one reviews the key features and processes involved in the pretreatment and fractionation of lignocellulosic biomass for bioalcohol production, including hydrothermal and thermochemical pretreatment, and fractionation to separate out valuable process feedstocks. Part two covers the hydrolysis (saccharification) processes applicable to pretreated feedstocks. This includes both acid and enzymatic approaches and also importantly covers the development of particular enzymes to improve this conversion step. This coverage is extended in Part three, with chapters reviewing integrated hydrolysis and fermentation processes, and fermentation and co-fermentation challenges of lignocellulose-derived sugars, as well as separation and purification processes for bioalcohol extraction.Part four examines the analysis, monitoring and modelling approaches relating to process and quality control in the pretreatment, hydrolysis and fermentation steps of lignocellulose-to-bioalcohol production. Finally, Part five discusses the life-cycle assessment of lignocellulose-to-bioalcohol production, as well as the production of valuable chemicals and longer-chain alcohols from lignocellulosic biomass.With its distinguished international team of contributors, Bioalcohol production is a standard reference for fuel engineers, industrial chemists and biochemists, plant scientists and researchers in this area. - Provides an overview of the life-cycle assessment of lignocelluloses-to-bioalcohol production - Reviews the key features and processes involved in the pre-treatment and fractionation of lignocellulosic biomass for bioalcohol production - Examines the analysis, monitoring and modelling approaches relating to process and quality control in pre-treatment, hydrolysis and fermentation
Download or read book Recent Advances in Computational and Experimental Mechanics Vol II written by D. K. Maiti and published by Springer Nature. This book was released on 2022-02-26 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. II) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.
Download or read book Recent Advances in Computational and Experimental Mechanics Vol I written by D. Maity and published by Springer. This book was released on 2022-12-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (Vol. - I) presents select proceedings of the first Online International Conference on Recent Advances in Computational and Experimental Mechanics (ICRACEM 2020) and focuses on theoretical, computational and experimental aspects of solid and fluid mechanics. Various topics covered are computational modelling of extreme events; mechanical modelling of robots; mechanics and design of cellular materials; mechanics of soft materials; mechanics of thin-film and multi-layer structures; meshfree and particle based formulations in continuum mechanics; multi-scale computations in solid mechanics, and materials; multiscale mechanics of brittle and ductile materials; topology and shape optimization techniques; acoustics including aero-acoustics and wave propagation; aerodynamics; dynamics and control in micro/nano engineering; dynamic instability and buckling; flow-induced noise and vibration; inverse problems in mechanics and system identification; measurement and analysis techniques in nonlinear dynamic systems; multibody dynamical systems and applications; nonlinear dynamics and control; stochastic mechanics; structural dynamics and earthquake engineering; structural health monitoring and damage assessment; turbomachinery noise; vibrations of continuous systems, characterization of advanced materials; damage identification and non-destructive evaluation; experimental fire mechanics and damage; experimental fluid mechanics; experimental solid mechanics; measurement in extreme environments; modal testing and dynamics; experimental hydraulics; mechanism of scour under steady and unsteady flows; vibration measurement and control; bio-inspired materials; constitutive modelling of materials; fracture mechanics; mechanics of adhesion, tribology and wear; mechanics of composite materials; mechanics of multifunctional materials; multiscale modelling of materials; phase transformations in materials; plasticity and creep in materials; fluid mechanics, computational fluid dynamics; fluid-structure interaction; free surface, moving boundary and pipe flow; hydrodynamics; multiphase flows; propulsion; internal flow physics; turbulence modelling; wave mechanics; flow through porous media; shock-boundary layer interactions; sediment transport; wave-structure interaction; reduced-order models; turbo-machinery; experimental hydraulics; mechanism of scour under steady and unsteady flows; applications of machine learning and artificial intelligence in mechanics; transport phenomena and soft computing tools in fluid mechanics. The contents of these two volumes (Volumes I and II) discusses various attributes of modern-age mechanics in various disciplines, such as aerospace, civil, mechanical, ocean engineering and naval architecture. The book will be a valuable reference for beginners, researchers, and professionals interested in solid and fluid mechanics and allied fields.
Download or read book New Technologies Development and Application written by Isak Karabegović and published by Springer. This book was released on 2018-05-14 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this book were presented at the International Conference “New Technologies, Development and Application,” which was held at the Academy of Sciences and Arts of Bosnia and Herzegovina in Sarajevo, Bosnia and Herzegovina on 28th–30th June 2018. The book covers a wide range of technologies and technical disciplines including complex systems such as: Robotics, Mechatronics Systems, Automation, Manufacturing, Cyber-Physical Systems, Autonomous Systems, Sensors, Networks, Control Systems, Energy Systems, Automotive Systems, Biological Systems, Vehicular Networking and Connected Vehicles, Effectiveness and Logistics Systems, Smart Grids, Nonlinear Systems, Power Systems, Social Systems, and Economic Systems.
Download or read book Substitute Natural Gas from Waste written by Massimiliano Materazzi and published by Academic Press. This book was released on 2019-05-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substitute Natural Gas from Waste: Technical Assessment and Industrial Applications of Biochemical and Thermochemical Processes provides an overview of the science and technology of anaerobic digestion and thermal gasification for the treatment of biomass and unrecyclable waste residues. The book provides both the theoretical and practical basis for the clean and high-efficiency utilization of waste and biomass to produce Bio-Substitute Natural Gas (SNG). It examines different routes to produce bio-SNG from waste feedstocks, detailing solutions to unique problems, such as scale up issues and process integration. Final sections review waste sourcing and processing. This book is an ideal and practical reference for those developing, designing, scaling and managing bio-SNG production and utilization systems. Engineering students will find this to be a comprehensive resource on the application of fundamental concepts of bio-SNG production that are illustrated through innovative, recent case studies. Presents detailed scientific and technical information Describes up-to-date concepts, processes and plants for efficient anaerobic digestion and gasification of wastes and syngas utilization Compares gasification with anaerobic digestion for different situations Proposes alternative strategies to increase efficiency and overcome energy balance limitations Includes benchmarking data and industrial real-life examples to demonstrate the main process features and implementation pathways of bio-SNG systems from dry and wet waste, both in developed and developing countries
Download or read book Biomass Gasifier tars written by Thomas A. Milne and published by . This book was released on 1999 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioenergy from Sustainable Forestry written by J. Richardson and published by Springer Science & Business Media. This book was released on 2005-12-30 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioenergy from Sustainable Forestry synthesizes information needed to design or implement sustainable forest management systems for production of biomass for energy in conjunction with other forest products. It is organized around the criteria for sustainable forest management: productivity, environment, social issues, economics, and legal and institutional framework. More than 25 international experts from 10 countries have brought together available ecological, physical, operational, social and economic information and identified gaps in knowledge related to biomass production and harvesting systems. This is the first time that such comprehensive information has been brought together under one cover, using an integrated, holistic approach. Guiding principles and state of the art knowledge are emphasized. The book will enable forest resource managers and planners to evaluate the ability of specific forest regions to sustainably meet bioenergy production demands.
