Download or read book Seismic Design for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on how to meet the applicable safety requirements in relation to the design aspects of new nuclear installations subjected to seismic hazard. These recommendations focus on the consistent application of methods and procedures, in accordance with best practice, for seismic analysis, design, testing and qualification of structures, systems and components. New recommendations include applications of seismic isolation systems, the seismic margin to be achieved by the design and application of the graded approach. This Safety Guide is intended for use by organizations involved in the seismic design of nuclear installations, in analysis, verification and review, and in the provision of technical support, as well as by regulatory bodies.
Download or read book Seismic Design for Nuclear Power Plants written by Robert J. Hansen and published by MIT Press (MA). This book was released on 1970 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of protective measures to guard against the spread of radioactive debris following reactor disasters has been given extensive and careful engineering attention over the past several years. Much of this attention has been devoted to eliminating or minimizing the effects of malfunctions of internal components. But reactors can also suffer externally caused disasters—for example, their radioactive cores can be damaged by earthquakes or by missiles generated by tornadoes. Earthquakes in particular will continue to render man vulnerable even to the "peaceful atom" as the number of nuclear power plants increases and as they come to be located in those parts of the world that have a history of seismic activity. It was to consider such problems that the seminar reported here was held. The conferees, who are leaders in this special and important field, gathered in Cambridge, Massachusetts, in spring 1969, to present the papers whose titles are listed below. Together they cover both the theoretical underpinnings of the subject and specific applications to nuclear reactors; they provide both useful summaries of what is known to date and some new thinking on the subject, not before published. Contents: Preface—T. J. Thompson. Foreword—R. J. Hansen. Introduction—R. V. Whitman. Geological and Seismological Factors Influencing the Assessment of a Seismic Threat to Nuclear Reactors—Daniel Linehan, S. J. Geophysics—Keiiti Aki. Design Seismic Inputs—C. Allin Cornell. Some Observations on Probabilistic Methods in the Seismic Design of Nuclear Power Plants—C. Allin Cornell. Seismic Risk and Seismic Design Decisions—Luis Esteva. Fundamentals of Soil Amplification—J. M. Roesset. Soil Structure Interaction—R. V. Whitman. Evaluation of Soil Properties for Site Evaluation and Dynamic Analysis of Nuclear Plants—R. V. Whitman. Structural Response to Seismic Input—J. M. Biggs. Seismic Analysis of Equipment Mounted on a Massive Structure—J. M. Biggs and J. M. Roesset. Modal Response of Containment Structures—Peter Jan Pahl. Provision of Required Seismic Resistance—M. J. Holley, Jr. A Measure of Earthquake Intensity—Arturo Arias. Closure—R. J. Hansen.
Download or read book Seismic Design and Qualification for Nuclear Power Plants written by and published by . This book was released on 1992 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide was originally issued as Safety Guide No. 50-SG-S2. It provides details on the design of a nuclear power plant such that earthquakes at the site determined according to Safety Guide No. 50-SG-S1 will not jeopardize its safety.
Download or read book Seismic Design and Qualification for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2003 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a generally accepted way to design a nuclear power plant so that an earthquake motion at the site will not jeopardize the safety of the plant. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.
Download or read book Earthquake Engineering for Nuclear Facilities written by Masanori Hamada and published by Springer. This book was released on 2016-12-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive compilation of earthquake- and tsunami-related technologies and knowledge for the design and construction of nuclear facilities. As such, it covers a wide range of fields including civil engineering, architecture, geotechnical engineering, mechanical engineering, and nuclear engineering, for the development of new technologies providing greater resistance against earthquakes and tsunamis. It is crucial both for students of nuclear energy courses and for young engineers in nuclear power generation industries to understand the basics and principles of earthquake- and tsunami-resistant design of nuclear facilities. In Part I, "Seismic Design of Nuclear Power Plants", the design of nuclear power plants to withstand earthquakes and tsunamis is explained, focusing on buildings, equipment's, and civil engineering structures. In Part II, "Basics of Earthquake Engineering", fundamental knowledge of earthquakes and tsunamis as well as the dynamic response of structures and foundation ground are explained.
Download or read book ASCE Standard ASCE SEI 43 19 written by American Society of Civil Engineers and published by . This book was released on 2020-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 43-19 provides stringent criteria to ensure that nuclear facilities are designed to withstand the effects of earthquake ground shaking.
Download or read book Seismic Design for Nuclear Installations written by IAEA. and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Safety Guide provides recommendations on how to meet the applicable safety requirements in relation to the design aspects of new nuclear installations subjected to seismic hazard. These recommendations focus on the consistent application of methods and procedures, in accordance with best practice, for seismic analysis, design, testing and qualification of structures, systems and components. New recommendations include applications of seismic isolation systems, the seismic margin to be achieved by the design and application of the graded approach. This Safety Guide is intended for use by organizations involved in the seismic design of nuclear installations, in analysis, verification and review, and in the provision of technical support, as well as by regulatory bodies."-- Provided by publisher.
Download or read book Seismic Analysis of Safety related Nuclear Structures and Commentary on Standard for Seismic Analysis of Safety Related Nuclear Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 1987-01-01 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design and Qualification for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Nuclear Installations Against External Events Excluding Earthquakes written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-23 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the design of nuclear installations for protection against the effects of external events (excluding earthquakes), meeting the applicable safety requirements established in relation to the design aspects of nuclear installations subjected to external events. It provides methods and procedures for defining an appropriate design for a nuclear installation, based on the site hazard evaluation and the layout of the installation. The aim is to provide design guidance, in particular for the protection of structures, systems and components important to safety against design basis external events. The guide also provides recommendations on the selection of beyond design basis external events, in order to check and verify safety margins.
Download or read book Seismic Hazards in Site Evaluation for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-01-19 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide supersedes the 2010 edition of IAEA Safety Standards Series No. SSG-9. It takes account of recently gained knowledge and practices developed by Member States related to seismic hazards, especially lessons from the Fukushima Daiichi accident. It also addresses concomitant events associated with earthquakes, such as tsunamis. The revision provides a clearer separation between the process for assessing the seismic hazards at a specific nuclear installation site and the process for defining the related basis for design and safety assessment of the nuclear installation. Thus, it bridges gaps and avoids undue overlap of the two processes, which correspond to and are performed at different stages of siting of the nuclear installation.
-
Book Details:
- Author : OECD Nuclear Energy Agency. Committee on the Safety of Nuclear Installations
- Publisher : Nuclear Energy Agency, Organisation for Economic Co-operation and Development ; [Washington, D.C. : Sold by OECD Publications and Information Center]
- Release : 1980
- ISBN :
- Pages : 186 pages
Download or read book Reference Seismic Ground Motions in Nuclear Safety Assessments written by OECD Nuclear Energy Agency. Committee on the Safety of Nuclear Installations and published by Nuclear Energy Agency, Organisation for Economic Co-operation and Development ; [Washington, D.C. : Sold by OECD Publications and Information Center]. This book was released on 1980 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Seismic Safety for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2024-02-07 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the seismic safety evaluation of nuclear installations. It addresses all types of new and existing nuclear installations. This Safety Guide presents three assessment methodologies: the deterministic approach, generally known as seismic margin assessment (SMA), seismic probabilistic safety assessment (SPSA), and a combination of SMA and SPSA known as probabilistic safety assessment (PSA) based SMA. This Safety Guide provides specific recommendations on applying a performance-based graded approach to the seismic safety evaluation of nuclear installations other than nuclear power plants. It also covers the relation between seismic safety margins and defense-in-depth (DiD) level 3 and level 4. For new nuclear installations, this Safety Guide provides recommendations to assess adequacy of seismic margin to avoid cliff edge effects considering DiD level 3 and level 4. This publication is intended for use by regulatory bodies, operating organizations, and designers of nuclear installations.
Download or read book Seismic Design for Nuclear Power Plants written by Robert J. Hansen and published by . This book was released on 1970 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Power Plant Design and Seismic Safety Considerations written by and published by DIANE Publishing. This book was released on with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methodologies for Seismic Safety Evaluation of Existing Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-08-26 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experience shows that an assessment of the seismic capacity of an existing operating facility can be required for a number of reasons, for example identification of potential seismic vulnerabilities based on operating experience events or the periodic safety review programme. This publication covers the seismic safety evaluation programmes to be performed on existing nuclear installations in order to ensure that the required fundamental safety functions are available, with particular attention to the safe shutdown of reactors. It includes lessons learned based on the IAEA Action Plan on Nuclear Safety following the Fukushima Daiichi accident, and updated methodologies for seismic safety evaluation of nuclear installations.
Download or read book Textbook of Seismic Design written by G. R. Reddy and published by Springer. This book was released on 2019-08-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the seismic design of Structures, Piping Systems and Components (SSC). It explains the basic mechanisms of earthquakes, generation of design basis ground motion, and fundamentals of structural dynamics; further, it delves into geotechnical aspects related to the earthquake design, analysis of multi degree-of-freedom systems, and seismic design of RC structures and steel structures. The book discusses the design of components and piping systems located at the ground level as well as at different floor levels of the structure. It also covers anchorage design of component and piping system, and provides an introduction to retrofitting, seismic response control including seismic base isolation, and testing of SSCs. The book is written in an easy-to-understand way, with review questions, case studies and detailed examples on each topic. This educational approach makes the book useful in both classrooms and professional training courses for students, researchers, and professionals alike.