Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.
Download or read book Welding Metallurgy written by Sindo Kou and published by John Wiley & Sons. This book was released on 2003-03-31 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include new technological advancements in welding Uses illustrations and diagrams to explain metallurgical phenomena Features exercises and examples An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.
Download or read book The Metallurgy of Steel written by Henry Marion Howe and published by . This book was released on 1891 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by R.W. Cahn and published by Elsevier. This book was released on 1996-02-09 with total page 2889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth edition of a work which first appeared in 1965. The first edition had approximately one thousand pages in a single volume. This latest volume has almost three thousand pages in 3 volumes which is a fair measure of the pace at which the discipline of physical metallurgy has grown in the intervening 30 years.Almost all the topics previously treated are still in evidence in this version which is approximately 50% bigger than the previous edition. All the chapters have been either totally rewritten by new authors or thoroughly revised and expanded, either by the third-edition authors alone or jointly with new co-authors. Three chapters on new topics have been added, dealing with dry corrosion, oxidation and protection of metal surfaces; the dislocation theory of the mechanical behavior of intermetallic compounds; and (most novel) a chapter on polymer science for metallurgists, which analyses the conceptual mismatch between metallurgists' and polymer scientists' way of looking at materials. Special care has been taken throughout all chapters to incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included in this edition. There is a very detailed subject index, as well as a comprehensive author index.The original version of this book has long been regarded as the standard text in physical metallurgy and this thoroughly rewritten and updated version will retain this status.
Download or read book Surface Segregation written by J. du Plessis and published by Trans Tech Publications Ltd. This book was released on 1991-01-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the fundamental aspects of surface segregation theory. The material is presented in a self-contained manner and mathematical procedures are worked through in some cases in order to provide the reader with the necessary opportunity to realize the restrictions under which the expressions are valid.
Download or read book Surface Segregationphenomena written by Peter A. Dowben and published by CRC Press. This book was released on 1990-08-29 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the phenomena associated with the segregation of one element in a multicomponent material. It describes the kinetics of segregation and contains a tabular summary of the pros and cons of the various models. The easy-to-read chapters outline in detail the macroscopic approach and provide an in-depth review of broken-bond models. This comprehensive informative resource also addresses important multicomponent systems. These systems include metals with non-metallic constituents, semiconductor-metal interfaces, steels and steel-related alloys, and real catalysts. Readers of this text will gain a good fundamental understanding and overview of surface, interfacial, and selvedge segregation. Those who have an interest in physics, vacuum science, material science, and chemical, mechanical, and electrical engineering will benefit from this imperative work.
Download or read book The ECPH Encyclopedia of Mining and Metallurgy written by Xu Kuangdi and published by Springer Nature. This book was released on with total page 2429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2013 with total page 1164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Developments in Powder Metallurgy written by Henry H. Hausner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Five years ago, the worldwide powder metallurgy fraternity gathered in New York City to attend the first international conference devoted entirely to powder metal lurgy to take place in the United States. It was a tentative venture, entered into by the sponsors with no idea as to whether it would fail or succeed. The only assurances we had were that the metal-powder producing and consuming industries were rapidly expanding and that powder metallurgy was truly becoming one of the international sciences. The 1960 Conference was successful not only in terms of attendance and interest, but also in terms of knowledge gained. The literature had been enriched by the contributions of its participants to foster and encourage this type of world wide exchange. Thus, another such conference was held in 1965-expanded in scope and supplemented by an exhibition of the latest advances in raw materials, processing equipment, and finished products of powder metallurgy. On behalf of the Conference sponsors-the Metal Powder Industries Federa tion, the American Powder Metallurgy Institute, and the Metallurgical Society of AIME-I thank all those who participated and who helped make the 1965 Interna tional Powder Metallurgy Conference a rewarding experience and memorable event in our industry's history. Support of the National Science Foundation, which made it possible for several speakers from abroad to participate in the program, is gratefully acknowledged.
Download or read book An Introduction to Metallurgy Second Edition written by Sir Alan Cottrell and published by CRC Press. This book was released on 2019-10-16 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic textbook has been reprinted by The Institute of Materials to provide undergraduates with a broad overview of metallurgy from atomic theory, thermodynamics, reaction kinetics and crystal physics, to elasticity and plasticity.
Download or read book Metallurgy of Basic Weld Metal written by G M Evans and published by Woodhead Publishing. This book was released on 1997-07-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes the results of over 20 years research completed this year at one of the world's premier consumable manufacturers and aimed at improving the properties of MMA electrodes for high quality applications. It examines the influence of some 17 elements and welding variables on the composition, microstructure and mechanical properties of the resulting weld metal. The often complex relationships discovered are sufficient to give a good understanding of the properties of weld metals produced by other arc welding processes.
Download or read book Physical Metallurgy written by David E. Laughlin and published by Newnes. This book was released on 2014-07-24 with total page 2963 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fifth edition of the highly regarded family of titles that first published in 1965 is now a three-volume set and over 3,000 pages. All chapters have been revised and expanded, either by the fourth edition authors alone or jointly with new co-authors. Chapters have been added on the physical metallurgy of light alloys, the physical metallurgy of titanium alloys, atom probe field ion microscopy, computational metallurgy, and orientational imaging microscopy. The books incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included. - Exhaustively synthesizes the pertinent, contemporary developments within physical metallurgy so scientists have authoritative information at their fingertips - Replaces existing articles and monographs with a single, complete solution - Enables metallurgists to predict changes and create novel alloys and processes
Download or read book Introduction to the Physical Metallurgy of Welding written by Kenneth Easterling and published by Elsevier. This book was released on 2013-09-17 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys. The book is divided into four chapters, in which the middle two deal with the microstructure and properties of the welded joint, such as the weld metal and the heat-affected zone. The first chapter is designed to provide a wider introduction to the many process variables of fusion welding, particularly those that may influence microstructure and properties, while the final chapter is concerned with cracking and fracture in welds. A comprehensive case study of the Alexander Kielland North Sea accommodation platform disaster is also discussed at the end. The text is written for undergraduate or postgraduate courses in departments of metallurgy, materials science, or engineering materials. The book will also serve as a useful revision text for engineers concerned with welding problems in industry.
Download or read book Mining and Metallurgy written by and published by . This book was released on 1907 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Metallurgy of Steel written by Frank William Harbord and published by . This book was released on 1911 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding Metallurgy and Weldability of Nickel Base Alloys written by John C. Lippold and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date coverage of welding metallurgy aspects and weldability issues associated with Ni-base alloys Welding Metallurgy and Weldability of Nickel-Base Alloys describes the fundamental metallurgical principles that control the microstructure and properties of welded Ni-base alloys. It serves as a practical how-to guide that enables engineers to select the proper alloys, filler metals, heat treatments, and welding conditions to ensure that failures are avoided during fabrication and service. Chapter coverage includes: Alloying additions, phase diagrams, and phase stability Solid-solution strengthened Ni-base alloys Precipitation strengthened Ni-base alloys Oxide dispersion strengthened alloys and nickel aluminides Repair welding of Ni-base alloys Dissimilar welding Weldability testing High-chromium alloys used in nuclear power applications With its excellent balance between the fundamentals and practical problem solving, the book serves as an ideal reference for scientists, engineers, and technicians, as well as a textbook for undergraduate and graduate courses in welding metallurgy.
