Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 2024-11-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Laser Doppler and Phase Doppler Measurement Techniques written by H.-E. Albrecht and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the first comprehensive treatment, this book covers all aspects of the laser Doppler and phase Doppler measurement techniques, including light scattering from small particles, fundamental optics, system design, signal and data processing, tracer particle generation, and applications in single and two-phase flows. The book is intended as both a reference book for more experienced users as well as an instructional book for students. It provides ample material as a basis for a lecture course on the subject and represents one of the most comprehensive treatments of the phase Doppler technique to date. The book will serve as a valuable reference book in any fluid mechanics laboratory where the laser Doppler or phase Doppler techniques are used. This work reflects the authors' long practical experience in the development of the techniques and equipment, as the many examples confirm.
Download or read book Particle Image Velocimetry written by Ronald J. Adrian and published by Cambridge University Press. This book was released on 2011 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.
Download or read book Particle Image Velocimetry written by Markus Raffel and published by Springer Science & Business Media. This book was released on 2007-08-09 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This immensely practical guide to PIV provides a condensed, yet exhaustive guide to most of the information needed for experiments employing the technique. This second edition has updated chapters on the principles and extra information on microscopic, high-speed and three component measurements as well as a description of advanced evaluation techniques. What’s more, the huge increase in the range of possible applications has been taken into account as the chapter describing these applications of the PIV technique has been expanded.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book UV Laser Spectroscopy Applied to In cylinder Phenomena of Spark Ignition Engines written by Michael Knapp and published by Cuvillier Verlag. This book was released on 1997 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Intake Port Geometry on In cylinder Fluid Motion in a Reciprocating I C Engine written by Steven Frederick Krause and published by . This book was released on 1995 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Powertrain Instrumentation and Test Systems written by Michael Paulweber and published by Springer. This book was released on 2016-06-17 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the increasingly complex test systems for powertrain components and systems giving an overview of the diverse types of test beds for all components of an advanced powertrain focusing on specific topics such as instrumentation, control, simulation, hardware-in-the-loop, automation or test facility management. This book is intended for powertrain (component) development engineers, test bed planners, test bed operators and beginners.
Download or read book Optical Measurements written by Franz Mayinger and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing possibilities of computer-aided data processing have caused a new revival of optical techniques in many areas of mechanical and chemical en gineering. Optical methods have a long tradition in heat and mass transfer and in fluid dynamics. Global experimental information is not sufficient for developing constitution equations to describe complicated phenomena in fluid dynamics or in transfer processes by a computer program . Furthermore, a detailed insight with high local and temporal resolution into the thermo-and fluiddynamic situations is necessary. Sets of equations for computer program in thermo dynamics and fluid dynamics usually consist of two types of formulations: a first one derived from the conservation laws for mass, energy and momentum, and a second one mathematically modelling transport processes like laminar or turbulent diffusion. For reliably predicting the heat transfer, for example, the velocity and temperature field in the boundary layer must be known, or a physically realistic and widely valid correlation describing the turbulence must be avail able. For a better understanding of combustion processes it is necessary to know the local concentration and temperature just ahead of the flame and in the ignition zone.
Download or read book Effect of Turbulence on Flame Initiation and Combustion Cyclic Variation in Spark Ignition Engines written by Mazen Hammoud and published by . This book was released on 1996 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Techniques Applied to Fluid Mechanics written by R.J. Adrian and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the tradition of its predecessors, this volume comprises a selection of the best papers presented at the Ninth International Symposium on Applications of Laser Techniques to Fluid Mechanics, held in Lisbon in July 2000. The papers reflect the state-of-the-art in laser applications of laser techniques in fluid mechanics describing novel ideas for instrumentation, instrumentation developments, results of measurements of wall-bounded flows, free flows and flames and flow and combustion in engines. The papers demonstrate the continuing interest in the development of an understanding of new methodologies and implementation in terms of new instrumentation.
Download or read book Optics and Spectroscopy for Fluid Characterization written by Johannes Kiefer and published by MDPI. This book was released on 2018-08-20 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Optics and Spectroscopy for Fluid Characterization" that was published in Applied Sciences
Download or read book Laser Velocimetry and Particle Sizing written by Howard Doyle Thompson and published by . This book was released on 1979 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: A Historical Review of Laser Velocimetry. Developments in Instrumentation, Data Analysis, Combustion Measurements, Measurements in Turbulent Flows, Measurements in Internal Combustion Engines, General Applications, Particle Diagnostics, Wild Card Session, and Panel Discussion.
Download or read book Fluid Mechanics Measurements written by R. Goldstein and published by Routledge. This book was released on 2017-11-13 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides updated fluid mechanics measurement techniques as well as a comprehensive review of flow properties required for research, development, and application. Fluid-mechanics measurements in wind tunnel studies, aeroacoustics, and turbulent mixing layers, the theory of fluid mechanics, the application of the laws of fluid mechanics to measurement techniques, techniques of thermal anemometry, laser velocimetry, volume flow measurement techniques, and fluid mechanics measurement in non-Newtonian fluids, and various other techniques are discussed.
Download or read book Fluid Flow Measurement written by Paul J. LaNasa and published by Butterworth-Heinemann. This book was released on 2014-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications
Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
