Download or read book SCOPE Safety controls Optimization by Performance Evaluation written by and published by . This book was released on 1996 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Department of Energy's Hanford Tank Waste Remediation system poses a significant challenge for hazard management because of the uncertainty that surrounds many of the variables that must be considered in decisions on safety and control strategies. As a result, site managers must often operate under excessively conservative and expensive assumptions. This report describes a systematic approach to quantifying the uncertainties surrounding the critical parameters in control decisions (e.g., condition of the tanks, kinds of wastes, types of possible accidents) through the use of expert elicitation methods. The results of the elicitations would then be used to build a decision support system and accident analysis model that would allow managers to see how different control strategies would affect the cost and safety of a facility configuration.
Download or read book Analysis Control and Optimization of Complex Dynamic Systems written by El-Kébir Boukas and published by Springer Science & Business Media. This book was released on 2005-12-05 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Control and Optimization of Complex Dynamic Systems gathers in a single volume a spectrum of complex dynamic systems related papers written by experts in their fields, and strongly representative of current research trends. Complex systems present important challenges, in great part due to their sheer size which makes it difficult to grasp their dynamic behavior, optimize their operations, or study their reliability. Yet, we live in a world where, due to increasing inter-dependencies and networking of systems, complexity has become the norm. With this in mind, the volume comprises two parts. The first part is dedicated to a spectrum of complex problems of decision and control encountered in the area of production and inventory systems. The second part is dedicated to large scale or multi-agent system problems occurring in other areas of engineering such as telecommunication and electric power networks, as well as more generic context.
Download or read book Safety and Reliability Safe Societies in a Changing World written by Stein Haugen and published by CRC Press. This book was released on 2018-06-15 with total page 3202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Safe Societies in a Changing World collects the papers presented at the 28th European Safety and Reliability Conference, ESREL 2018 in Trondheim, Norway, June 17-21, 2018. The contributions cover a wide range of methodologies and application areas for safety and reliability that contribute to safe societies in a changing world. These methodologies and applications include: - foundations of risk and reliability assessment and management - mathematical methods in reliability and safety - risk assessment - risk management - system reliability - uncertainty analysis - digitalization and big data - prognostics and system health management - occupational safety - accident and incident modeling - maintenance modeling and applications - simulation for safety and reliability analysis - dynamic risk and barrier management - organizational factors and safety culture - human factors and human reliability - resilience engineering - structural reliability - natural hazards - security - economic analysis in risk management Safety and Reliability – Safe Societies in a Changing World will be invaluable to academics and professionals working in a wide range of industrial and governmental sectors: offshore oil and gas, nuclear engineering, aeronautics and aerospace, marine transport and engineering, railways, road transport, automotive engineering, civil engineering, critical infrastructures, electrical and electronic engineering, energy production and distribution, environmental engineering, information technology and telecommunications, insurance and finance, manufacturing, marine transport, mechanical engineering, security and protection, and policy making.
Download or read book Inventory of Federal Energy related Environment and Safety Research for written by and published by . This book was released on 1980 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Management for the Oil Gas and Process Industries written by Robert Bruce Hey and published by Gulf Professional Publishing. This book was released on 2017-04-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance Management for the Oil, Gas, and Process Industries: A Systems Approach is a practical guide on the business cycle and techniques to undertake step, episodic, and breakthrough improvement in performance to optimize operating costs. Like many industries, the oil, gas, and process industries are coming under increasing pressure to cut costs due to ongoing construction of larger, more integrated units, as well as the application of increasingly stringent environmental policies. Focusing on the 'value adder' or 'revenue generator' core system and the company direction statement, this book describes a systems approach which assures significant sustainable improvements in the business and operational performance specific to the oil, gas, and process industries. The book will enable the reader to: utilize best practice principles of good governance for long term performance enhancement; identify the most significant performance indicators for overall business improvement; apply strategies to ensure that targets are met in agreed upon time frames. - Describes a systems approach which assures significant sustainable improvements in the business and operational performance specific to the oil, gas, and process industries - Helps readers set appropriate and realistic short-term/ long-term targets with a pre-built facility health checker - Elucidates the relationship between PSM, OHS, and Asset Integrity with an increased emphasis on behavior-based safety - Discusses specific oil and gas industry issues and examples such as refinery and gas plant performance initiatives and hydrocarbon accounting
Download or read book Control Systems Safety Evaluation and Reliability written by William M. Goble and published by . This book was released on 1998 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Third International Conference on Sustainable Civil Engineering and Architecture written by J. N. Reddy and published by Springer Nature. This book was released on 2024-01-12 with total page 1973 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes articles from the Third International Conference on Sustainable Civil Engineering and Architecture (ICSSEA 2023), held at Da Nang City, Vietnam, on July 19-21, 2023. The conference brings together international experts from both academia and industry to share their knowledge and expertise, facilitate collaboration, and improve cooperation in the field. The book focuses on the most recent developments in sustainable architecture and civil engineering, including offshore structures, structural engineering, building materials, and architecture.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1973 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quality Control and Quality Assurance written by and published by BoD – Books on Demand. This book was released on 2024-05-29 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: In any engineering field (including manufacturing, construction, transportation, aerospace, food and agriculture, oil and gas, etc.), ensuring product quality is fundamental to achieving success. Quality assurance (QA) and quality control (QC) are integral components of managing quality. According to the American Society for Quality (ASQ), QA is defined as the part of quality management that focuses on instilling confidence in meeting quality requirements, while QC is concerned with fulfilling those requirements. QA instills confidence internally within the engineering organization’s management and externally with customers, government agencies, regulators, certifiers, and other stakeholders. QA primarily examines how processes are carried out or how products are made, while QC concentrates on product inspection. When QA and QC collaborate effectively, organizational efficiency is enhanced, resulting in superior products. Quality Control and Quality Assurance - Techniques and Applications explores various aspects of quality, including quality planning, QC, QA, and quality enhancement. It covers topics related to QA such as total quality management (TQM), failure testing, process and product quality assurance (PPQA), and statistical process control (SPC). QC includes chapters describing process control, control charts, acceptance sampling, and product quality assessment. For meaningful and easy traceability, the chapters are divided into four sections: “Basics of QA/QC”; “Applications of QA/QC in Industry”; “Applications of QA/QC in Healthcare”; and “Applications of QA/QC in Education”. Covering the latest practices, techniques, and applications in QC and QA, this book is a valuable resource for engineering and business students, practicing engineers, engineering managers, and third-party agencies.
Download or read book Inventory of Federal Energy related Environment and Safety Research for FY 1978 Project listings and indexes written by and published by . This book was released on 1979 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inventory of Federal Energy related Environment and Safety Research for FY 1979 written by and published by . This book was released on 1980 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Medical Devices and Human Engineering written by Joseph D. Bronzino and published by CRC Press. This book was released on 2014-12-17 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Known as the bible of biomedical engineering, The Biomedical Engineering Handbook, Fourth Edition, sets the standard against which all other references of this nature are measured. As such, it has served as a major resource for both skilled professionals and novices to biomedical engineering. Medical Devices and Human Engineering, the second volume of the handbook, presents material from respected scientists with diverse backgrounds in biomedical sensors, medical instrumentation and devices, human performance engineering, rehabilitation engineering, and clinical engineering. More than three dozen specific topics are examined, including optical sensors, implantable cardiac pacemakers, electrosurgical devices, blood glucose monitoring, human–computer interaction design, orthopedic prosthetics, clinical engineering program indicators, and virtual instruments in health care. The material is presented in a systematic manner and has been updated to reflect the latest applications and research findings.
Download or read book Instrument Engineers Handbook Volume Three written by Bela G. Liptak and published by CRC Press. This book was released on 2002-06-26 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook, Third Edition: Volume Three: Process Software and Digital Networks provides an in-depth, state-of-the-art review of existing and evolving digital communications and control systems. While the book highlights the transportation of digital information by buses and networks, the total coverage doesn't stop there. It des
Download or read book Information Control Problems in Manufacturing Technology 1992 written by M.B. Zaremba and published by Elsevier. This book was released on 2016-02-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain more than 80 of the best papers presented at the INCOM '92 Symposium, and relate to the vast changes which are occurring worldwide in manufacturing technology. Research oriented technical papers cover subjects such as: simulation of manufacturing processes; sensor based robots; information systems; general aspects of CIM and manufacturing networks.
Download or read book Project Performance Review written by Alexia Nalewaik and published by CRC Press. This book was released on 2016-07-07 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project Performance Review focuses on evaluating projects efficiently and in context, identifying important improvement opportunities and leading project and organizational management practices. It advises how these can be put in place to give stakeholders confidence in the control and delivery of their projects without waste. The authors explain not just the mechanism and objective of project performance reviews but also the ideal environment in which they are intended to be implemented. The shaping of this environment, by the stakeholders and technical team, is key to achieving your intended outcomes. Without the professional cooperation of all interested and informed parties, the effectiveness of any review may be compromised. Topics addressed include: introducing the project review method, engaging project stakeholders, ensuring project governance, conducting project risk assessments, improving accountability, providing project assurance, organizing and managing projects, optimizing review scope and approach, avoiding review pitfalls, meeting existing audit standards, and proposing alternate approaches to project evaluation.
Download or read book Inventory of Federal Energy related Environment and Safety Research for FY 1978 written by and published by . This book was released on 1979 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Transportation Abstracts written by and published by . This book was released on 1984 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
