Download or read book Scalar Transport and Flamelet Modelling in Turbulent Jet Diffusion Flames written by Johannes P. Sanders and published by . This book was released on 1994 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Theoretical and Numerical Combustion written by Thierry Poinsot and published by R.T. Edwards, Inc.. This book was released on 2005 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing numerical techniques for combustion, this textbook describes both laminar and turbulent flames, addresses the problem of flame-wall interaction, and presents a series of theoretical tools used to study the coupling phenomena between combustion and acoustics. The second edition incorporates recent advances in unsteady simulation methods,
Download or read book Numerical Experiments in Homogeneous Turbulence written by Robert Sugden Rogallo and published by . This book was released on 1981 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissipative Structures in Transport Processes and Combustion written by Dirk Meinköhn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any description of the workings of nature by means of measurements and ob servations is beset with the problem of how to cope with an immense amount of information. In physics, it is an established approach to derive basic equations which then serve as cornerstones of what is called a theory of the phenomena. This derivation is based on certain characteristics of the phenomena, the refine ment of which results from a reduction of the amount of empirical information, with the reduction leading to an enhancement of the very characteristics that are sought for in the otherwise seemingly amorphous wealth of data. If physics is mainly concerned with the derivation of equations, lately there has emerged a conceptually different approach, which in a way is equivalent to a reversal of the line of attack: here, the basic equations serve as the point of departure and the aim is to demonstrate that the equations are capable of de to represent the essence of the scribing certain characteristics which are thought phenomenon under investigation. By definition, this variant approach must tran scend the realm of pure physics and could possibly be termed "applied mathe matics" in a broader sense. The phenomena it strives to characterize arise from a range of influences such that a combination of theoretical concepts from physics, chemistry, engineering, biology, etc. , is called for.
Download or read book Fundamentals of Premixed Turbulent Combustion written by Andrei Lipatnikov and published by CRC Press. This book was released on 2012-10-24 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean burning of premixed gases is considered to be a promising combustion technology for future clean and highly efficient gas turbine combustors. Yet researchers face several challenges in dealing with premixed turbulent combustion, from its nonlinear multiscale nature and the impact of local phenomena to the multitude of competing models. Filling a gap in the literature, Fundamentals of Premixed Turbulent Combustion introduces the state of the art of premixed turbulent combustion in an accessible manner for newcomers and experienced researchers alike. To more deeply consider current research issues, the book focuses on the physical mechanisms and phenomenology of premixed flames, with a brief discussion of recent advances in partially premixed turbulent combustion. It begins with a summary of the relevant knowledge needed from disciplines such as thermodynamics, chemical kinetics, molecular transport processes, and fluid dynamics. The book then presents experimental data on the general appearance of premixed turbulent flames and details the physical mechanisms that could affect the flame behavior. It also examines the physical and numerical models for predicting the key features of premixed turbulent combustion. Emphasizing critical analysis, the book compares competing concepts and viewpoints with one another and with the available experimental data, outlining the advantages and disadvantages of each approach. In addition, it discusses recent advances and highlights unresolved issues. Written by a leading expert in the field, this book provides a valuable overview of the physics of premixed turbulent combustion. Combining simplicity and topicality, it helps researchers orient themselves in the contemporary literature and guides them in selecting the best research tools for their work.
Download or read book Annual Research Briefs written by Center for Turbulence Research (U.S.) and published by . This book was released on 2010 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Phenomena in Fires written by Mohammad Faghri and published by WIT Press. This book was released on 2008 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlled fires are beneficial for the generation of heat and power while uncontrolled fires, like fire incidents and wildfires, are detrimental and can cause enormous material damage and human suffering. This edited book presents the state-of-the-art of modeling and numerical simulation of the important transport phenomena in fires. It describes how computational procedures can be used in analysis and design of fire protection and fire safety. Computational fluid dynamics, turbulence modeling, combustion, soot formation, thermal radiation modeling are demonstrated and applied to pool fires, flame spread, wildfires, fires in buildings and other examples.
Download or read book Theory and Modeling of Dispersed Multiphase Turbulent Reacting Flows written by Lixing Zhou and published by Butterworth-Heinemann. This book was released on 2018-01-25 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Modeling of Dispersed Multiphase Turbulent Reacting Flows gives a systematic account of the fundamentals of multiphase flows, turbulent flows and combustion theory. It presents the latest advances of models and theories in the field of dispersed multiphase turbulent reacting flow, covering basic equations of multiphase turbulent reacting flows, modeling of turbulent flows, modeling of multiphase turbulent flows, modeling of turbulent combusting flows, and numerical methods for simulation of multiphase turbulent reacting flows, etc. The book is ideal for graduated students, researchers and engineers in many disciplines in power and mechanical engineering. - Provides a combination of multiphase fluid dynamics, turbulence theory and combustion theory - Covers physical phenomena, numerical modeling theory and methods, and their applications - Presents applications in a wide range of engineering facilities, such as utility and industrial furnaces, gas-turbine and rocket engines, internal combustion engines, chemical reactors, and cyclone separators, etc.
Download or read book Journal of Thermophysics and Heat Transfer written by and published by . This book was released on 1997 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Reacting Flows written by P.A. Libby and published by Springer. This book was released on 2014-03-12 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Turbulent and Multiphase Combustion written by Kenneth Kuan-yun Kuo and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed coverage of advanced combustion topics from the author of Principles of combustion, Second Edition Turbulence, turbulent combustion, and multiphase reacting flows have become major research topics in recent decades due to their application across diverse fields, including energy, environment, propulsion, transportation, industrial safety, and nanotechnology. Most of the knowledge accumulated from this research has never been published in book form—until now. Fundamentals of Turbulent and Multiphase Combustion presents up-to-date, integrated coverage of the fundamentals of turbulence, combustion, and multiphase phenomena along with useful experimental techniques, including non-intrusive, laser-based measurement techniques, providing a firm background in both contemporary and classical approaches. Beginning with two full chapters on laminar premixed and non-premixed flames, this book takes a multiphase approach, beginning with more common topics and moving on to higher-level applications. In addition, Fundamentals of Turbulent and Multiphase Combustion: Addresses seven basic topical areas in combustion and multiphase flows, including laminar premixed and non-premixed flames, theory of turbulence, turbulent premixed and non-premixed flames, and multiphase flows Covers spray atomization and combustion, solid-propellant combustion, homogeneous propellants, nitramines, reacting boundary-layer flows, single energetic particle combustion, and granular bed combustion Provides experimental setups and results whenever appropriate Supported with a large number of examples and problems as well as a solutions manual, Fundamentals of Turbulent and Multiphase Combustion is an important resource for professional engineers and researchers as well as graduate students in mechanical, chemical, and aerospace engineering.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1992 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1982 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Models for Turbulent Reacting Flows written by Rodney O. Fox and published by Cambridge University Press. This book was released on 2003-10-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Table of contents
