Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by National Research Council and published by National Academies Press. This book was released on 1997-04-18 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.
Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. - Covers various viewpoints, including theory, modeling, design and applications of I&C systems - Includes codes and standards, inspection procedures and regulatory issues - Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time - Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix
Download or read book Safety related Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1984 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide deals primarily with design requirements for instrumentation and control systems important to safety but not part of the protection system (Safety Series No. 50-SG-D3). It gives recommendations on instrumentation and control systems for the prevention or termination of plant transients to avoid, if possible, the actuation of safety systems.
Download or read book Safety Related Instrumentation and Control Systems for Nuclear Power Plants written by and published by . This book was released on 1984 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Dependability Assessment of Software for Safety Instrumentation and Control Systems at Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2018-09-30 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication defines a framework that represents the state of the art in assessment methodologies for safety and instrumentation and control software used at nuclear power plants. It describes an approach for developing and communicating assessments based on claims, argument and evidence. The assessment of software dependability, which encompasses properties such as safety, reliability, availability, maintainability and security, is an essential and challenging aspect of the safety justification. Guiding principles for a dependability assessment are established to provide the basis for defining an assessment strategy and implementing the assessment process. Sources of evidence for the assessment are provided and lessons learned from past digital instrumentation and control system implementation in areas such as software development, operational usage, regulatory review and platform certification are also described.
Download or read book Managing Modernization of Nuclear Power Plant Instrumentation and Control Systems written by International Atomic Energy Agency and published by . This book was released on 2004 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all of the management activities related to modernization of I&C systems in nuclear power plants, including the evaluation of all I&C systems to determine which can be successfully maintained and which need to be modernized.
Download or read book Safety Related Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1984-01-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book Verification and Validation of Software Related to Nuclear Power Plant Instrumentation and Control written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides practical guidance on the methods available for verification of the software and validation of computer based systems in nuclear power plants, and on how and when these methods can be effectively applied. It will be of particular interest to all those involved in the development, implementation, maintenance and use of software and computer based instrumentation and control systems in nuclear power plants.
Download or read book Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems written by Yastrebenetsky, Michael A. and published by IGI Global. This book was released on 2020-05-22 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and security are crucial to the operations of nuclear power plants, but cyber threats to these facilities are increasing significantly. Instrumentation and control systems, which play a vital role in the prevention of these incidents, have seen major design modifications with the implementation of digital technologies. Advanced computing systems are assisting in the protection and safety of nuclear power plants; however, significant research on these computational methods is deficient. Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems is a pivotal reference source that provides vital research on the digital developments of instrumentation and control systems for assuring the safety and security of nuclear power plants. While highlighting topics such as accident monitoring systems, classification measures, and UAV fleets, this publication explores individual cases of security breaches as well as future methods of practice. This book is ideally designed for engineers, industry specialists, researchers, policymakers, scientists, academicians, practitioners, and students involved in the development and operation of instrumentation and control systems for nuclear power plants, chemical and petrochemical industries, transport, and medical equipment.
Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer Nature. This book was released on 2020-01-07 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a compilation of selected papers from the Fourth International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in August 2019 in Guiyang, China. The purpose of the symposium was to discuss inspection, testing, certification and research concerning the software and hardware of instrument and control (I&C) systems used at nuclear power plants (NPP), such as sensors, actuators and control systems. The event provides a venue for exchange among experts, scholars and nuclear power practitioners, as well as a platform for the combination of teaching and research at universities and enterprises to promote the safe development of nuclear power plants. Readers will find a wealth of valuable insights into achieving safer and more efficient instrumentation and control systems.
Download or read book NUREG CR written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1977 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Power Safety written by James H. Rust and published by Elsevier. This book was released on 2013-10-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and current treatment of the subject of nuclear power safety, this work addresses itself to such issues of public concern as: radioactivity in routine effluents and its effect on human health and the environment, serious reactor accidents and their consequences, transportation accidents involving radioactive waste, the disposal of radioactive waste, particularly high-level wastes, and the possible theft of special nuclear materials and their fabrication into a weapon by terrorists. The implementation of the defense-in-depth concept of nuclear power safety is also discussed. Of interest to all undergraduate and graduate students of nuclear engineering, this work assumes a basic understanding of scientific and engineering principles and some familiarity with nuclear power reactors
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by and published by . This book was released on 1995 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Instrumentation and Control Systems for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA Safety Standards Series N. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a revision and combination of two Safety Guides, IAEA Safety Standards Series No. NS-G-1.1 and No. NS-G-1.3. The revision takes into account developments in instrumentation and control (I&C) systems since the publication of the earlier Safety Guides. The main changes relate to the continuing development of computer applications and the evolution of the methods necessary for their safe, secure and practical use. In addition, account is taken of developments in human factors engineering and the need for computer security. This Safety Guide references and takes into account other IAEA Safety Standards and Nuclear Security Series publications that provide guidance relating to I&C design.
