Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 2011-03-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prudent Practices in the Laboratory-the book that has served for decades as the standard for chemical laboratory safety practice-now features updates and new topics. This revised edition has an expanded chapter on chemical management and delves into new areas, such as nanotechnology, laboratory security, and emergency planning. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices in the Laboratory provides guidance on planning procedures for the handling, storage, and disposal of chemicals. The book offers prudent practices designed to promote safety and includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices in the Laboratory will continue to serve as the leading source of chemical safety guidelines for people working with laboratory chemicals: research chemists, technicians, safety officers, educators, and students.

Download or read book Chemical Laboratory Safety and Security written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-07 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of State charged the Academies with the task of producing a protocol for development of standard operating procedures (SOPs) that would serve as a complement to the Chemical Laboratory Safety and Security: A Guide to Prudent Chemical Management and be included with the other materials in the 2010 toolkit. To accomplish this task, a committee with experience and knowledge in good chemical safety and security practices in academic and industrial laboratories with awareness of international standards and regulations was formed. The hope is that this toolkit expansion product will enhance the use of the previous reference book and the accompanying toolkit, especially in developing countries where safety resources are scarce and experience of operators and end-users may be limited.

Download or read book Chemical Safety in the Laboratory written by Stephen K. Hall and published by CRC Press. This book was released on 2018-12-19 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing is more important to an organization than the health and safety of its workers. The managerial effectiveness of any health and safety program is judged on the basis of how well it prevents injuries and ill health. Chemical Safety in the Laboratory provides a proven approach to implementing and maintaining an effective chemical safety program for laboratories in hospital, industrial, and educational settings. Based on 20 years of experience managing and auditing chemical safety programs, the author discusses the OSHA Laboratory Standard and the Chemical Hygiene Plan, provides guidelines for the effective use of personal protective equipment, and details chemical emergency planning and response procedures. He also outlines a 19-step decontamination procedure for emergency responders. Employee chemical exposure monitoring and victim handling procedures are among the other major topics covered in this essential guide.

Download or read book Laboratory Safety for Chemistry Students written by Robert H. Hill, Jr. and published by John Wiley & Sons. This book was released on 2011-09-21 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: "...this substantial and engaging text offers a wealth of practical (in every sense of the word) advice...Every undergraduate laboratory, and, ideally, every undergraduate chemist, should have a copy of what is by some distance the best book I have seen on safety in the undergraduate laboratory." Chemistry World, March 2011 Laboratory Safety for Chemistry Students is uniquely designed to accompany students throughout their four-year undergraduate education and beyond, progressively teaching them the skills and knowledge they need to learn their science and stay safe while working in any lab. This new principles-based approach treats lab safety as a distinct, essential discipline of chemistry, enabling you to instill and sustain a culture of safety among students. As students progress through the text, they’ll learn about laboratory and chemical hazards, about routes of exposure, about ways to manage these hazards, and about handling common laboratory emergencies. Most importantly, they’ll learn that it is very possible to safely use hazardous chemicals in the laboratory by applying safety principles that prevent and minimize exposures. Continuously Reinforces and Builds Safety Knowledge and Safety Culture Each of the book’s eight chapters is organized into three tiers of sections, with a variety of topics suited to beginning, intermediate, and advanced course levels. This enables your students to gather relevant safety information as they advance in their lab work. In some cases, individual topics are presented more than once, progressively building knowledge with new information that’s appropriate at different levels. A Better, Easier Way to Teach and Learn Lab Safety We all know that safety is of the utmost importance; however, instructors continue to struggle with finding ways to incorporate safety into their curricula. Laboratory Safety for Chemistry Students is the ideal solution: Each section can be treated as a pre-lab assignment, enabling you to easily incorporate lab safety into all your lab courses without building in additional teaching time. Sections begin with a preview, a quote, and a brief description of a laboratory incident that illustrates the importance of the topic. References at the end of each section guide your students to the latest print and web resources. Students will also find “Chemical Connections” that illustrate how chemical principles apply to laboratory safety and “Special Topics” that amplify certain sections by exploring additional, relevant safety issues. Visit the companion site at http://userpages.wittenberg.edu/dfinster/LSCS/.

Download or read book Prudent Practices in the Laboratory written by National Research Council and published by National Academies Press. This book was released on 1995-09-16 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume updates and combines two National Academy Press bestsellers--Prudent Practices for Handling Hazardous Chemicals in Laboratories and Prudent Practices for Disposal of Chemicals from Laboratories--which have served for more than a decade as leading sources of chemical safety guidelines for the laboratory. Developed by experts from academia and industry, with specialties in such areas as chemical sciences, pollution prevention, and laboratory safety, Prudent Practices for Safety in Laboratories provides step-by-step planning procedures for handling, storage, and disposal of chemicals. The volume explores the current culture of laboratory safety and provides an updated guide to federal regulations. Organized around a recommended workflow protocol for experiments, the book offers prudent practices designed to promote safety and it includes practical information on assessing hazards, managing chemicals, disposing of wastes, and more. Prudent Practices for Safety in Laboratories is essential reading for people working with laboratory chemicals: research chemists, technicians, safety officers, chemistry educators, and students.

Download or read book Safe Science written by National Research Council and published by National Academies Press. This book was released on 2014-10-08 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent serious and sometimes fatal accidents in chemical research laboratories at United States universities have driven government agencies, professional societies, industries, and universities themselves to examine the culture of safety in research laboratories. These incidents have triggered a broader discussion of how serious incidents can be prevented in the future and how best to train researchers and emergency personnel to respond appropriately when incidents do occur. As the priority placed on safety increases, many institutions have expressed a desire to go beyond simple compliance with regulations to work toward fostering a strong, positive safety culture: affirming a constant commitment to safety throughout their institutions, while integrating safety as an essential element in the daily work of laboratory researchers. Safe Science takes on this challenge. This report examines the culture of safety in research institutions and makes recommendations for university leadership, laboratory researchers, and environmental health and safety professionals to support safety as a core value of their institutions. The report discusses ways to fulfill that commitment through prioritizing funding for safety equipment and training, as well as making safety an ongoing operational priority. A strong, positive safety culture arises not because of a set of rules but because of a constant commitment to safety throughout an organization. Such a culture supports the free exchange of safety information, emphasizes learning and improvement, and assigns greater importance to solving problems than to placing blame. High importance is assigned to safety at all times, not just when it is convenient or does not threaten personal or institutional productivity goals. Safe Science will be a guide to make the changes needed at all levels to protect students, researchers, and staff.

Download or read book Laboratory Safety Theory and Practice written by Anthony Fuscaldo and published by Elsevier. This book was released on 2012-12-02 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory Safety: Theory and Practice focuses on theoretical aspects of the hazards the students, technicians, and scientists encounter in the laboratory. It presents methods of risk assessment that can be applied to technologies as they are translated from the scientist's mind to the laboratory bench. It is organized into three sections designated as General Laboratory Safety, Biological Laboratory Safety, and Medical and Psychological Factors. The first section, encompassing three chapters, discusses hazards found in almost all laboratories; pertinent safety theories and practices; ubiquitous compounds that are either toxic or carcinogenic and guidelines for their use; and radiation hazards. Chapters 4 to 7 focus on the safety in the biological laboratory. Discussions on relatively complex group of viruses, approach to recombinant DNA research, and awareness on the possible hazards associated with the field are included in this book. Chapters 6 and 7 present design and function of biohazard laboratories and the hazards relating to laboratory animals. The final section discusses medical surveillance of persons at risk and the psychological factors involved in accident control. It presents a comprehensive list of chemical agents, their sources, subsequent physical effects, and the accepted mode of medical surveillance. Various genetic screening tests and their potential use for the evaluation of presumptive and actual mutagens are also covered. This book is ideal for safety and design engineers, students, technicians, and scientists.

Download or read book Biosafety in the Laboratory written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1989-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosafety in the Laboratory is a concise set of practical guidelines for handling and disposing of biohazardous material. The consensus of top experts in laboratory safety, this volume provides the information needed for immediate improvement of safety practices. It discusses high- and low-risk biological agents (including the highest-risk materials handled in labs today), presents the "seven basic rules of biosafety," addresses special issues such as the shipping of dangerous materials, covers waste disposal in detail, offers a checklist for administering laboratory safetyâ€"and more.

Download or read book CRC Handbook of Laboratory Safety 5th Edition written by A. Keith Furr and published by CRC Press. This book was released on 2000-04-12 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expanded and updated, The CRC Handbook of Laboratory Safety, Fifth Edition provides information on planning and building a facility, developing an organization infrastructure, planning for emergencies and contingencies, choosing the correct equipment, developing operational plans, and meeting regulatory requirements. Still the essential reference tool, the New Edition helps you organize your safety efforts to adhere to the latest regulations and use the newest technology. Thoroughly revised, the CRC Handbook of Laboratory Safety, Fifth Edition includes new OSHA laboratory safety standards, the 1994 NRC radiation safety standards, guidelines for X-ray use in hospitals, enforcement of standards for dealing with blood-borne pathogens, OSHA actions covering hazardous waste operations and emergency response, and the latest CDC guidelines for research with microbial hazards. Every word on every page has been scrutinized, and literally hundreds of changes have been made to bring the material up to date. See what's new in the New Edition New figures and tables illustrating the new material Internet references in addition to journal articles Changes in the Clean Air Act regarding incineration of hospital, medical, and infectious waste Obsolete articles removed and replaced - over one hundred pages of new material New information on respiratory protection guidelines

Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994

Download or read book Purification of Laboratory Chemicals written by W.L.F. Armarego and published by Elsevier. This book was released on 2003-03-07 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fifth edition, the book has been updated to include more detailed descriptions of new or more commonly used techniques since the last edition as well as remove those that are no longer used, procedures which have been developed recently, ionization constants (pKa values) and also more detail about the trivial names of compounds.In addition to having two general chapters on purification procedures, this book provides details of the physical properties and purification procedures, taken from literature, of a very extensive number of organic, inorganic and biochemical compounds which are commercially available. This is the only complete source that covers the purification of laboratory chemicals that are commercially available in this manner and format.* Complete update of this valuable, well-known reference* Provides purification procedures of commercially available chemicals and biochemicals* Includes an extremely useful compilation of ionisation constants

Download or read book Safe Handling of Radioactive Isotopes written by National Committee on Radiation Protection (U.S.) and published by . This book was released on 1949 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laboratory Safety Guide written by and published by . This book was released on 2004 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety in academic chemistry laboratories written by Jay A. Young and published by . This book was released on 2003 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains volume 1 of 2 and describes safety guidelines for academic chemistry laboratories to prevent accidents for college and university students. Contents include: (1) "Your Responsibility for Accident Prevention"; (2) "Guide to Chemical Hazards"; (3) "Recommended Laboratory Techniques"; and (4) "Safety Equipment and Emergency Procedures." Appendices include the Web as a source of safety information and incompatible chemicals.

Download or read book Nanotechnology Safety written by Ramazan Asmatulu and published by Newnes. This book was released on 2013-06-12 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a new and emerging discipline that is multidisciplinary and interdisciplinary. The usage of nanosystems, nanomaterials, nano-devices, etc. permeates all aspects of society. Cancer targeting and curing nanosystems are being introduced into the biomedical and pharmaceutical industries; so are lightweight energy absorbing or blast-proof nanohybrid material in the aerospace, automotive and marine industries and high-efficiency energy harvesting nanomaterials, etc. Society has a vested interest in knowing how these new materials, devices and systems are changing the economy and similar landscapes. The book outlines the regulatory and environmental issues related to nanotechnology per industry, offers guidelines in assessing the risks and discusses the legal and socioeconomical issues involved. Case studies will be utilized to provide examples of the positive and negative impacts of nanotechnology. - Provides an overview and the basis for understanding the critical importance of the reactivity and efficacy of nanomaterials and the emerging role of nanotechnology in society - Explains the fundamentals, ethics, regulatory and environmental issues of nanosafety and how they shape the emerging nanotechnology industry and markets and includes extensive lists of glossary terms, terminologies and concepts needed for Material Data Safety Sheets - Discusses the relevance and specificity of nanosafety issues per industry and includes discussions on the "Homeland Security and Infrastructure Industries" of interest to society in general - Includes nanotechnology risk assessment and delineates and quantifies the risk assessment process for nanotechnology safety of paramount importance to most industries and systems - Outlines the legal and intellectual property ramifications of nanotechnology and its impact on productivity and society

Download or read book Safety in the Use of Chemicals at Work written by International Labour Office and published by International Labour Organization. This book was released on 1993 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This code of practice provides guidance on extablishing a systematic approach to safety in the use of chemicals at work. Intended for all those engaged in framing provisions, its recommendations are designed to ensure an efficient flow of information from manufacturers to users.

Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.