Download or read book Run time Reconfigurable Constant Multiplication on Field Programmable Gate Arrays written by Möller, Konrad and published by kassel university press GmbH. This book was released on 2017 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the question how run-time reconfigurable constant multipliers (RCMs) can be efficiently implemented on field programmable gate arrays (FPGAs). RCMs calculate the multiplication of an input number by one out of several constants which can be selected during run-time. This is important as constant multiplication is an essential operation in digital signalprocessing (DSP) applications. The evaluation of RCMs is done by considering reconfiguration using reconfigurable look-up tables (LUTs),reconfiguration using multiplexers (MUXs) and Partial Reconfiguration (PR). This book contributes two new methods to generate RCMs using the first two reconfiguration principles. First, a LUT-based constant multiplier is extended to be reconfigurable. Second, optimized constant multipliers without reconfiguration are fused using MUXs. Moreover, a general post-optimization for MUX-based RCMs is proposed. Finally, the design space produced in this way is analyzed using synthesis experiments. The contributed methods provide important trade-off points in the design space of RCMs on FPGAs.
Download or read book Multiple Constant Multiplication Optimizations for Field Programmable Gate Arrays written by Martin Kumm and published by Springer. This book was released on 2016-04-13 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers field programmable gate array (FPGA)-specific optimizations of circuits computing the multiplication of a variable by several constants, commonly denoted as multiple constant multiplication (MCM). These optimizations focus on low resource usage but high performance. They comprise the use of fast carry-chains in adder-based constant multiplications including ternary (3-input) adders as well as the integration of look-up table-based constant multipliers and embedded multipliers to get the optimal mapping to modern FPGAs. The proposed methods can be used for the efficient implementation of digital filters, discrete transforms and many other circuits in the domain of digital signal processing, communication and image processing.
Download or read book Design Principles for Embedded Systems written by KCS Murti and published by Springer Nature. This book was released on 2021-09-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to graduate and undergraduate students enrolled in electronics and electrical engineering and computer science. This book attempts to bridge the gap between electronics and computer science students, providing complementary knowledge that is essential for designing an embedded system. The book covers key concepts tailored for embedded system design in one place. The topics covered in this book are models and architectures, Executable Specific Languages – SystemC, Unified Modeling Language, real-time systems, real-time operating systems, networked embedded systems, Embedded Processor architectures, and platforms that are secured and energy-efficient. A major segment of embedded systems needs hard real-time requirements. This textbook includes real-time concepts including algorithms and real-time operating system standards like POSIX threads. Embedded systems are mostly distributed and networked for deterministic responses. The book covers how to design networked embedded systems with appropriate protocols for real-time requirements. Each chapter contains 2-3 solved case studies and 10 real-world problems as exercises to provide detailed coverage and essential pedagogical tools that make this an ideal textbook for students enrolled in electrical and electronics engineering and computer science programs.
Download or read book High Performance Integer Arithmetic Circuit Design on FPGA written by Ayan Palchaudhuri and published by Springer. This book was released on 2015-07-06 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the optimized implementations of several arithmetic datapath, controlpath and pseudorandom sequence generator circuits for realization of high performance arithmetic circuits targeted towards a specific family of the high-end Field Programmable Gate Arrays (FPGAs). It explores regular, modular, cascadable and bit-sliced architectures of these circuits, by directly instantiating the target FPGA-specific primitives in the HDL. Every proposed architecture is justified with detailed mathematical analyses. Simultaneously, constrained placement of the circuit building blocks is performed, by placing the logically related hardware primitives in close proximity to one another by supplying relevant placement constraints in the Xilinx proprietary “User Constraints File”. The book covers the implementation of a GUI-based CAD tool named FlexiCore integrated with the Xilinx Integrated Software Environment (ISE) for design automation of platform-specific high-performance arithmetic circuits from user-level specifications. This tool has been used to implement the proposed circuits, as well as hardware implementations of integer arithmetic algorithms where several of the proposed circuits are used as building blocks. Implementation results demonstrate higher performance and superior operand-width scalability for the proposed circuits, with respect to implementations derived through other existing approaches. This book will prove useful to researchers, students and professionals engaged in the domain of FPGA circuit optimization and implementation.
Download or read book Embedded Systems Design with Special Arithmetic and Number Systems written by Amir Sabbagh Molahosseini and published by Springer. This book was released on 2017-03-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System Double-Base Number System, Decimal Floating Point Number System and Continuous Valued Number System. Readers will learn the strategies and trade-offs of using unconventional number systems in application-specific processors and be able to apply and design appropriate arithmetic operations from these number systems to boost the performance of digital systems.
Download or read book Handbook of Signal Processing Systems written by Shuvra S. Bhattacharyya and published by Springer. This book was released on 2018-10-13 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition of the Handbook of Signal Processing Systems, many of the chapters from the previous editions have been updated, and several new chapters have been added. The new contributions include chapters on signal processing methods for light field displays, throughput analysis of dataflow graphs, modeling for reconfigurable signal processing systems, fast Fourier transform architectures, deep neural networks, programmable architectures for histogram of oriented gradients processing, high dynamic range video coding, system-on-chip architectures for data analytics, analysis of finite word-length effects in fixed-point systems, and models of architecture. There are more than 700 tables and illustrations; in this edition over 300 are in color. This new edition of the handbook is organized in three parts. Part I motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; Part II discusses architectures for implementing these applications; and Part III focuses on compilers, as well as models of computation and their associated design tools and methodologies.
Download or read book Advanced Digital System Design written by Shirshendu Roy and published by Springer Nature. This book was released on 2023-09-25 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to undergraduate and graduate students enrolled in electrical, electronics, and communication engineering. The objective of this book is to help the readers to understand the concepts of digital system design as well as to motivate the students to pursue research in this field. Verilog Hardware Description Language (HDL) is preferred in this book to realize digital architectures. Concepts of Verilog HDL are discussed in a separate chapter and many Verilog codes are given in this book for better understanding. Concepts of system Verilog to realize digital hardware are also discussed in a separate chapter. The book covers basic topics of digital logic design like binary number systems, combinational circuit design, sequential circuit design, and finite state machine (FSM) design. The book also covers some advanced topics on digital arithmetic like design of high-speed adders, multipliers, dividers, square root circuits, and CORDIC block. The readers can learn about FPGA and ASIC implementation steps and issues that arise at the time of implementation. One chapter of the book is dedicated to study the low-power design techniques and another to discuss the concepts of static time analysis (STA) of a digital system. Design and implementation of many digital systems are discussed in detail in a separate chapter. In the last chapter, basics of some advanced FPGA design techniques like partial re-configuration and system on chip (SoC) implementation are discussed. These designs can help the readers to design their architecture. This book can be very helpful to both undergraduate and postgraduate students and researchers.
Download or read book Transactions on Computational Science XIII written by and published by Springer. This book was released on 2011-08-31 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 13th issue of the Transactions on Computational Science journal consists of two parts. The six papers in Part I span the areas of computing collision probability, digital image contour extraction, multiplicatively weighted Voronoi diagrams, multi-phase segmentation, the rough-set approach to incomplete information systems, and fault-tolerant systolic arrays for matrix multiplications. The five papers in Part II focus on neural-network-based trajectory prediction, privacy in vehicular ad-hoc networks, augmented reality for museum display and the consumer garment try-on experience, and geospatial knowledge discovery for crime analysis.
Download or read book Reconfigurable Computing written by Maya B. Gokhale and published by Springer Science & Business Media. This book was released on 2006-07-04 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-of-a-kind survey of the field of Reconfigurable Computing Gives a comprehensive introduction to a discipline that offers a 10X-100X acceleration of algorithms over microprocessors Discusses the impact of reconfigurable hardware on a wide range of applications: signal and image processing, network security, bioinformatics, and supercomputing Includes the history of the field as well as recent advances Includes an extensive bibliography of primary sources
Download or read book Computational Intelligence and Information Technology written by Vinu Das and published by Springer Science & Business Media. This book was released on 2013-01-02 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the First International Conference on Computational Intelligence and Information Technology, CIIT 2011, held in Pune, India, in November 2011. The 58 revised full papers, 67 revised short papers, and 32 poster papers presented were carefully reviewed and selected from 483 initial submissions. The papers are contributed by innovative academics and industrial experts in the field of computer science, information technology, computational engineering, mobile communication and security and offer a stage to a common forum, where a constructive dialog on theoretical concepts, practical ideas and results of the state of the art can be developed.
Download or read book Application Specific Arithmetic written by Florent de Dinechin and published by Springer Nature. This book was released on with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micro Electronics and Telecommunication Engineering written by Devendra Kumar Sharma and published by Springer Nature. This book was released on 2021-05-28 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 4th International Conference on Micro-Electronics and Telecommunication Engineering, held at SRM Institute of Science and Technology, Ghaziabad, India, during 26–27 September 2020. It covers a wide variety of topics in micro-electronics and telecommunication engineering, including micro-electronic engineering, computational remote sensing, computer science and intelligent systems, signal and image processing, and information and communication technology.
Download or read book Dynamic Reconfiguration written by Ramachandran Vaidyanathan and published by Springer Science & Business Media. This book was released on 2007-06-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Reconfiguration: Architectures and Algorithms offers a comprehensive treatment of dynamically reconfigurable computer architectures and algorithms for them. The coverage is broad starting from fundamental algorithmic techniques, ranging across algorithms for a wide array of problems and applications, to simulations between models. The presentation employs a single reconfigurable model (the reconfigurable mesh) for most algorithms, to enable the reader to distill key ideas without the cumbersome details of a myriad of models. In addition to algorithms, the book discusses topics that provide a better understanding of dynamic reconfiguration such as scalability and computational power, and more recent advances such as optical models, run-time reconfiguration (on FPGA and related platforms), and implementing dynamic reconfiguration. The book, featuring many examples and a large set of exercises, is an excellent textbook or reference for a graduate course. It is also a useful reference to researchers and system developers in the area.
Download or read book Reconfigurable Computing Architectures Tools and Applications written by Andreas Koch and published by Springer. This book was released on 2011-03-15 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 7th International Symposium on Reconfigurable Computing: Architectures, Tools and Applications, ARC 2011, held in Belfast, UK, in March 2011. The 40 revised papers presented, consisting of 24 full papers, 14 poster papers, and the abstracts of 2 plenary talks, were carefully reviewed and selected from 88 submissions. The topics covered are reconfigurable accelerators, design tools, reconfigurable processors, applications, device architecture, methodology and simulation, and system architecture.
Download or read book Computer Architecture 98 written by John Morris and published by Springer. This book was released on 1998-06-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third in the series of the Australasian Computer Architecture Conferences, ACAC98 was held in Perth, Australia, on the 2nd & 3rd of February 1998. This years submissions saw papers coming from Australia, Austria, China, Germany, Japan, New Zealand, Portugal, Singapore, Taiwan, and the United States, all presenting both novel as well as conventional architectural ideas. The 20 papers presented in this volume also cover the vital area of connection between processors - from geographically separated to closely coupled systems.
Download or read book Handbook of Floating Point Arithmetic written by Jean-Michel Muller and published by Birkhäuser. This book was released on 2018-05-02 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Floating-point arithmetic is the most widely used way of implementing real-number arithmetic on modern computers. However, making such an arithmetic reliable and portable, yet fast, is a very difficult task. As a result, floating-point arithmetic is far from being exploited to its full potential. This handbook aims to provide a complete overview of modern floating-point arithmetic. So that the techniques presented can be put directly into practice in actual coding or design, they are illustrated, whenever possible, by a corresponding program. The handbook is designed for programmers of numerical applications, compiler designers, programmers of floating-point algorithms, designers of arithmetic operators, and more generally, students and researchers in numerical analysis who wish to better understand a tool used in their daily work and research.
Download or read book Handbook of Parallel Computing written by Sanguthevar Rajasekaran and published by CRC Press. This book was released on 2007-12-20 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability of parallel computing to process large data sets and handle time-consuming operations has resulted in unprecedented advances in biological and scientific computing, modeling, and simulations. Exploring these recent developments, the Handbook of Parallel Computing: Models, Algorithms, and Applications provides comprehensive coverage on a
