Download or read book Reluctance Electric Machines written by Ion Boldea and published by CRC Press. This book was released on 2018-07-20 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric energy is arguably a key agent for our material prosperity. With the notable exception of photovoltaic generators, electric generators are exclusively used to produce electric energy from mechanical energy. More than 60% of all electric energy is used in electric motors for useful mechanical work in various industries. This book presents the modeling, performance, design, and control of reluctance synchronous and flux-modulation machines developed for higher efficiency and lower cost. It covers one- and three-phase reluctance synchronous motors in line-start applications and various reluctance flux-modulation motors in pulse width modulation converter-fed variable speed drives. FEATURES Presents basic and up-to-date knowledge about the topologies, modeling, performance, design, and control of reluctance synchronous machines. Includes information on recently introduced reluctance flux-modulation electric machines (switched- flux, flux-reversal, Vernier, transverse flux, claw pole, magnetic-geared dual-rotor, brushless doubly fed, etc.). Features numerous examples and case studies throughout. Provides a comprehensive overview of all reluctance electric machines.

Download or read book Induction Machines Handbook written by Ion Boldea and published by CRC Press. This book was released on 2020-05-26 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion. Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW. Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performance Fully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady state The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.

Download or read book Basic Electrical and Instrumentation Engineering written by P. Sivaraman and published by John Wiley & Sons. This book was released on 2021-01-13 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical and instrumentation engineering is changing rapidly, and it is important for the veteran engineer in the field not only to have a valuable and reliable reference work which he or she can consult for basic concepts, but also to be up to date on any changes to basic equipment or processes that might have occurred in the field. Covering all of the basic concepts, from three-phase power supply and its various types of connection and conversion, to power equation and discussions of the protection of power system, to transformers, voltage regulation, and many other concepts, this volume is the one-stop, "go to" for all of the engineer's questions on basic electrical and instrumentation engineering. There are chapters covering the construction and working principle of the DC machine, all varieties of motors, fundamental concepts and operating principles of measuring, and instrumentation, both from a "high end" point of view and the point of view of developing countries, emphasizing low-cost methods. A valuable reference for engineers, scientists, chemists, and students, this volume is applicable to many different fields, across many different industries, at all levels. It is a must-have for any library.

Download or read book Energy Efficiency in Motor Driven Systems written by Francesco Parasiliti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports the state of the art of energy-efficient electrical motor driven system technologies, which can be used now and in the near future to achieve significant and cost-effective energy savings. It includes the recent developments in advanced electrical motor end-use devices (pumps, fans and compressors) by some of the largest manufacturers. Policies and programs to promote the large scale penetration of energy-efficient technologies and the market transformation are featured in the book, describing the experiences carried out in different parts of the world. This extensive coverage includes contributions from relevant institutions in the Europe, North America, Latin America, Africa, Asia, Australia and New Zealand.

Download or read book Electrical Drives written by Jens Weidauer and published by John Wiley & Sons. This book was released on 2014-07-07 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of a user this book covers all aspects of modern electrical drives. It is aimed at both users, who wish to understand, design, use, and maintain electrical drives, as well as specialists, technicians, engineers, and students, who wish to gain a comprehensive overview of electrical drives. Jens Weidauer and Richard Messer describe the principles of electrical drives, their design, and application, through to complex automation solutions. In the process, they introduce the entire spectrum of drive solutions available and their main applications. A special aspect is the combination of multiple drives to form a drive system, as well as the integration of drives into automation solutions. In simple and clear language, and supported with many diagrams, complex relationships are described and presented in an easy-to-understand way. The authors deliberately avoid a comprehensive mathematical treatment of their subject and instead focus on a coherent description of the active principles and relationships. As a result, the reader will be in a position to understand electrical drives as a whole and to solve drive-related problems in everyday professional life.

Download or read book Energy Efficiency Improvements in Electric Motors and Drives written by Anibal de Almeida and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reduction of energy consumption through improvements in energy efficiency has become an important goal for all countries, in order to improve the efficiency of the economy, to increase energy supply security, and to reduce the emissions of CO and other pollutants caused by power· generation. 2 Electric motors use over half of all electricity consumed in developed countries. Typically 60-80% of the electricity which is used in the industrial sector and about 35% of the electricity used in the commercial sector in the European Union is consumed by motors. In industry, a motor consumes an annual quantity of electricity which corresponds to approximately 5 times its purchase price, throughout its whole life of aroun~ 12 to 20 years. Motors are by far the most important type of electric load. They are used in all sectors and in a wide range of applications, namely the following: fans, compressors, pumps, mills, winders, elevators, transports, home appliances, and office equipment, etc. It is their wide use that makes motor drive systems one of the main targets to achieve significant energy savings. As motors are the largest USers of electrical energy, even small efficiency improvements will produce very large energy savings.

Download or read book The Handbook of Lithium Ion Battery Pack Design written by John T. Warner and published by Elsevier. This book was released on 2024-05-14 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Lithium-Ion Battery Pack Design: Chemistry, Components, Types and Terminology,?Second Edition provides a clear and concise explanation of EV and Li-ion batteries for readers that are new to the field. The second edition expands and updates all topics covered in the original book, adding more details to all existing chapters and including major updates to align with all of the rapid changes the industry has experienced over the past few years. This handbook offers a layman's explanation of the history of vehicle electrification and battery technology, describing the various terminology and acronyms and explaining how to do simple calculations that can be used in determining basic battery sizing, capacity, voltage, and energy. By the end of this book the reader will have a solid understanding of the terminology around Li-ion batteries and be able to undertake simple battery calculations. The book is immensely useful to beginning and experienced engineers alike who are moving into the battery field. Li-ion batteries are one of the most unique systems in automobiles today in that they combine multiple engineering disciplines, yet most engineering programs focus on only a single engineering field. This book provides the reader with a reference to the history, terminology and design criteria needed to understand the Li-ion battery and to successfully lay out a new battery concept. Whether you are an electrical engineer, a mechanical engineer or a chemist, this book will help you better appreciate the inter-relationships between the various battery engineering fields that are required to understand the battery as an Energy Storage System. It gives great insights for readers ranging from engineers to sales, marketing, management, leadership, investors, and government officials. - Adds a brief history of battery technology and its evolution to current technologies? - Expands and updates the chemistry to include the latest types - Discusses thermal runaway and cascading failure mitigation technologies? - Expands and updates the descriptions of the battery module and pack components and systems?? - Adds description of the manufacturing processes for cells, modules, and packs? - Introduces and discusses new topics such as battery-as-a-service, cell to pack and cell to chassis designs, and wireless BMS?

Download or read book Handbook of Electrical Engineering written by Alan L. Sheldrake and published by John Wiley & Sons. This book was released on 2016-06-22 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical treatment of power system design within the oil, gas, petrochemical and offshore industries. These have significantly different characteristics to large-scale power generation and long distance public utility industries. Developed from a series of lectures on electrical power systems given to oil company staff and university students, Sheldrake's work provides a careful balance between sufficient mathematical theory and comprehensive practical application knowledge. Features of the text include: Comprehensive handbook detailing the application of electrical engineering to the oil, gas and petrochemical industries Practical guidance to the electrical systems equipment used on off-shore production platforms, drilling rigs, pipelines, refineries and chemical plants Summaries of the necessary theories behind the design together with practical guidance on selecting the correct electrical equipment and systems required Presents numerous 'rule of thumb' examples enabling quick and accurate estimates to be made Provides worked examples to demonstrate the topic with practical parameters and data Each chapter contains initial revision and reference sections prior to concentrating on the practical aspects of power engineering including the use of computer modelling Offers numerous references to other texts, published papers and international standards for guidance and as sources of further reading material Presents over 35 years of experience in one self-contained reference Comprehensive appendices include lists of abbreviations in common use, relevant international standards and conversion factors for units of measure An essential reference for electrical engineering designers, operations and maintenance engineers and technicians.

Download or read book Electrical Power Engineering Reference Applications Handbook written by K.C.Agrawal and published by BecomeShakespeare.com. This book was released on 2020-11-10 with total page 2458 pages. Available in PDF, EPUB and Kindle. Book excerpt: SOME UNIQUE FEATURES Special thrust on energy conservation, pollution control and space saving in consonance with the latest global requirements • Special Coverage on earthquake engineering and tsunami Seismic testing of critical machines . In all there are 32 Chapters and 2 Appendices. Each chapter is very interesting and full of rare Information . The book contains 5 parts and each part is a mini-encyclopedia on the subjects covered • Many topics are research work of the author and may have rare information not available in most works available in the market. Tables of all relevant and equivalent Standards IEC, BS, ANSI, NEMA, IEEE and IS at the end of each chapter is a rare feature APPLICATIONS OF THE HANDBOOK For professionals and practising engineers: As a reference handbook for all professionals and practising engineers associated with design, engineering, production, quality assurance, protection and testing. • Project engineering, project design and project Implementation A very useful book for every industry for selection, Installation and maintenance of electrical machines. . For practising engineers. It would be like keeping a gospel by their sides. For Inhouse training programmes: . Unique handbook for inhouse training courses for Industries, power generating, transmission and distribution organizations For students and research scholars : As a reference textbook for all electrical engineering students in the classrooms and during practical training. It can bridge the gap between the theory of the classroom and the practice in the field. A highly recommended book for all engineering colleges worldwide, right from 1st year through final year. It will prove to be a good guide during higher studies and research activities Subjects like Earthquake Engineering, Intelligent Switchgears, SCADA Power Systems, Surges. Temporary Over Voltage, Surge Protection, Reactive Power Control and Bus Systems etc. are some pertinent topics that can form the basis of their higher studies and research work . The book shall help in technological and product development and give a fresh Impetus to R&D.

Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.

Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.

Download or read book Newnes Electrical Power Engineer s Handbook written by D.F. Warne and published by Elsevier. This book was released on 2005-06-02 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this popular engineering reference book, previously titles Newnes Electrical Engineer's Handbook, provides a basic understanding of the underlying theory and operation of the major classes of electrical equipment. With coverage including the key principles of electrical engineering and the design and operation of electrical equipment, the book uses clear descriptions and logical presentation of data to explain electrical power and its applications. Each chapter is written by leading professionals and academics, and many sections conclude with a summary of key standards. The new edition is updated in line with recent advances in EMC, power quality and the structure and operation of power systems, making Newnes Electrical Power Engineer's Handbook an invaluable guide for today's electrical power engineer. - A unique, concise reference book with contributions from eminent professionals in the field - Provides straightforward and practical explanations, plus key information needed by engineers on a day-to-day basis - Includes a summary of key standards at the end of each chapter

Download or read book Electric Motors and Drives written by Austin Hughes and published by Newnes. This book was released on 1993 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Electric Motors and Drives is intended for non-specialist users of electric motors and drives, filling the gap between maths- and theory-based academic textbooks and the more prosaic 'handbooks', which provide useful detail but little opportunity for the development of real insight and understanding. The book explores all of the widely-used modern types of motor and drive, including conventional and brushless D.C., induction motors and servo dries, providing readers with the knowledge to select the right technology for a given job." "The third edition includes additional diagrams and worked examples throughout. Now topics include digital interfacing and control of drives, direct torque control of induction motors and current-fed operation in DC drives. The material on brushless servomotors has also been expanded."--BOOK JACKET.

Download or read book Guidance Note 1 written by Institution of Electrical Engineers and published by Institution of Electrical Engineers. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guidance Note enlarges upon and simplifies relevant requirements of BS 7671:2008. It includes detailed coverage of External Influences and factors affecting the installation of cables and equipment. It discusses various types of protective devices in easy to read text and includes illustrations in full colour.

Download or read book Synchronous Generators written by Ion Boldea and published by CRC Press. This book was released on 2015-09-03 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synchronous Generators, the first of two volumes in the Electric Generators Handbook, offers a thorough introduction to electrical energy and electricity generation, including the basic principles of electric generators. The book devotes a chapter to the most representative prime mover models for transients used in active control of various generators. Then, individual chapters explore large- and medium-power synchronous generator topologies, steady state, modeling, transients, control, design, and testing. Numerous case studies, worked-out examples, sample results, and illustrations highlight the concepts. Fully revised and updated to reflect the last decade’s worth of progress in the field, this Second Edition adds new sections that: Discuss high-power wind generators with fewer or no permanent magnets (PMs) Cover PM-assisted DC-excited salient pole synchronous generators Present multiphase synchronous machine inductances via the winding function method Consider the control of autonomous synchronous generators Examine additional optimization design issues Illustrate the optimal design of a large wind generator by the Hooke–Jeeves method Detail the magnetic equivalent circuit population-based optimal design of synchronous generators Address online identification of synchronous generator parameters Explain the small-signal injection online technique Explore line switching (on or off) parameter identification for isolated grids Describe synthetic back-to-back load testing with inverter supply The promise of renewable, sustainable energy rests on our ability to design innovative power systems that are able to harness energy from a variety of sources. Synchronous Generators, Second Edition supplies state-of-the-art tools necessary to design, validate, and deploy the right power generation technologies to fulfill tomorrow's complex energy needs.

Download or read book Process Heat Exchange written by Vincent Cavaseno and published by McGraw-Hill. This book was released on 1979 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Electrical Installation Practice written by Geoffrey Stokes and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Electrical Installation Practice covers all key aspects of industrial, commercial and domestic installations and draws on the expertise of a wide range of industrial experts. Chapters are devoted to topics such as wiring cables, mains and submains cables and distribution in buildings, as well as power supplies, transformers, switchgear, and electricity on construction sites. Standards and codes of practice, as well as safety, are also included. Since the Third Edition was published, there have been many developments in technology and standards. The revolution in electronic microtechnology has made it possible to introduce more complex technologies in protective equipment and control systems, and these have been addressed in the new edition. Developments in lighting design continue, and extra-low voltage luminaries for display and feature illumination are now dealt with, as is the important subject of security lighting. All chapters have been amended to take account of revisions to British and other standards, following the trend to harmonised European and international standards, and they also take account of the latest edition of the Wiring Regulations. This new edition will provide an invaluable reference for consulting engineers, electrical contractors and factory plant engineers.