Download or read book Ultrahigh Vacuum Metalorganic Chemical Vapor Deposition and in Situ Characterization of Nanoscale Titanium Dioxide Films written by Polly Wanda Chu and published by . This book was released on 1994 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin titanium dioxide films were produced by metalorganic chemical vapor deposition on sapphire(0001) in an ultrahigh vacuum (UHV) chamber. A method was developed for producing controlled submonolayer depositions from titanium isopropoxide precursor. Film thickness ranged from 0.1 to 2.7 nm. In situ X-ray photoelectron spectroscopy (XPS) was used to determine film stoichiometry with increasing thickness. The effect of isothermal annealing on desorption was evaluated. Photoelectron peak shapes and positions from the initial monolayers were analyzed for evidence of interface reaction. Deposition from titanium isopropoxide is divided into two regimes: depositions below and above the pyrolysis temperature. This temperature was determined to be 300 deg C. Controlled submonolayers of titanium oxide were produced by cycles of dosing with titanium isopropoxide vapor below and annealing above 300 deg C. Precursor adsorption below the pyrolysis temperature was observed to saturate after 15 minutes of dosing. The quantity absorbed was shown to have an upper limit of one monolayer. The stoichiometry of thin films grown by the cycling method were determined to be TiO2. Titanium dioxide film stoichiometry was unaffected by isothermal annealing at 700 deg C. Annealing produced a decrease in film thickness. This was explained as due to desorption. Desorption ceased at approximately 2.5 to 3 monolayers, suggesting bonding of the initial monolayers of film to sapphire is stronger than to itself. Evidence of sapphire reduction at the interface by the depositions was not observed. The XPS O is peak shifted with increased film thickness. The shifts were consistent with oxygen in sapphire and titanium dioxide having different O is photoelectron peak positions. Simulations showed the total shifts for thin films ranging in thickness of 0.1 to 2.7 nm to be -0.99 to -1.23 eV. Thick films were produced for comparison.
Download or read book Handbook of Chemical Vapor Deposition written by Hugh O. Pierson and published by William Andrew. This book was released on 1999-09-01 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turn to this new second edition for an understanding of the latest advances in the chemical vapor deposition (CVD) process. CVD technology has recently grown at a rapid rate, and the number and scope of its applications and their impact on the market have increased considerably. The market is now estimated to be at least double that of a mere seven years ago when the first edition of this book was published. The second edition is an update with a considerably expanded and revised scope. Plasma CVD and metallo-organic CVD are two major factors in this rapid growth. Readers will find the latest data on both processes in this volume. Likewise, the book explains the growing importance of CVD in production of semiconductor and related applications.
Download or read book Chemical Vapor Deposition written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 1997 with total page 1686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CVD XV written by Mark Donald Allendorf and published by The Electrochemical Society. This book was released on 2000 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Induced Damage in Optical Materials written by and published by . This book was released on 1988 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Chemical Vapor Deposition written by D.M. Dobkin and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Chemical Vapor Deposition provides a simple introduction to heat and mass transfer, surface and gas phase chemistry, and plasma discharge characteristics. In addition, the book includes discussions of practical films and reactors to help in the development of better processes and equipment. This book will assist workers new to chemical vapor deposition (CVD) to understand CVD reactors and processes and to comprehend and exploit the literature in the field. The book reviews several disparate fields with which many researchers may have only a passing acquaintance, such as heat and mass transfer, discharge physics, and surface chemistry, focusing on key issues relevant to CVD. The book also examines examples of realistic industrial reactors and processes with simplified analysis to demonstrate how to apply the principles to practical situations. The book does not attempt to exhaustively survey the literature or to intimidate the reader with irrelevant mathematical apparatus. This book is as simple as possible while still retaining the essential physics and chemistry. The book is generously illustrated to assist the reader in forming the mental images which are the basis of understanding.
Download or read book Laser Induced Damage in Optical Materials 1986 written by Harold Earl Bennett and published by . This book was released on 1988 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kirk Othmer Encyclopedia of Chemical Technology Index to Volumes 1 26 written by Kirk-Othmer and published by John Wiley & Sons. This book was released on 2007-03-23 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth edition of the Kirk-Othmer Encyclopedia of Chemical Technology builds upon the solid foundation of the previous editions, which have proven to be a mainstay for chemists, biochemists, and engineers at academic, industrial, and government institutions since publication of the first edition in 1949. The new edition includes necessary adjustments and modernisation of the content to reflect changes and developments in chemical technology. Presenting a wide scope of articles on chemical substances, properties, manufacturing, and uses; on industrial processes, unit operations in chemical engineering; and on fundamentals and scientific subjects related to the field. The Encyclopedia describes established technology along with cutting edge topics of interest in the wide field of chemical technology, whilst uniquely providing the necessary perspective and insight into pertinent aspects, rather than merely presenting information. Set began publication in January 2004 Over 1000 articles More than 600 new or updated articles 27 volumes Reviews from the previous edition: "The most indispensable reference in the English language on all aspects of chemical technology...the best reference of its kind". —Chemical Engineering News, 1992 "Overall, ECT is well written and cleanly edited, and no library claiming to be a useful resource for chemical engineering professionals should be without it." —Nicholas Basta, Chemical Engineering, December 1992
Download or read book Chemical Methods for Processing Nanomaterials written by Vidya Nand Singh and published by CRC Press. This book was released on 2021-03-16 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest advancements in the processing of various types of nanomaterials. The main objective of the book is to provide the reader with a comprehensive review of the latest advances in synthesis as well as processing of almost all kinds of nanomaterials using various physical and chemical methods. The book includes chapters on Chemical Methods such as microemulsions, colloidal route, wet chemical method, chemical vapor deposition technique, sol-gel method, electrodeposition for growing different kinds of nanomaterials including Chalcogenides, Metal Oxide nanostructures, perovskite nanocrystals, nano structures on patterned electrode, Low Dimensional Carbon Nanomaterials and applications at Nanoscale.
Download or read book Clean by Light Irradiation written by Vincenzo Augugliaro and published by Royal Society of Chemistry. This book was released on 2010 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the environmentally friendly cleaning materials functionalized with TiO2, a widely known semiconductor giving rise to redox reactions under artificial or solar irradiation. The role of titanium dioxide in the worldwide community is introduced first. The fundamental working principles of heterogeneous photocatalysis follow and a critical section on the semiconductor bulk and surface properties open the way to the differences between TiO2 blend features with respect to analogous thin film layouts. Then Follows the main section of the book which deals with the techniques applied to manufactured commercial devices, ranging from glasses to textiles and from concrete and other construction materials to paintings. Also road asphalt and other devices, such as photocatalytic air conditioning machines are outlined. Last generation materials, not yet commercialized, and the deposition techniques applied to prepare them are also widely discussed. The final part of the book covers the difficult and modern topic of standardization and comparison of performance of photocatalytic processes and in particular the guidelines proposed by various worldwide organizations for standardization are discussed. The book covers the general matters as well as the practical applications with the supporting methods discussed in detail. This book brings together a team of highly experienced and well-published experts in the field, providing a comprehensive view of the applications of supported titanium dioxide.
Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter
Download or read book Laser Induced Damage in Optical Materials 1986 written by Harold E. Bennett and published by ASTM International. This book was released on 1988 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Vapour Deposition CVD written by Kwang-Leong Choy and published by CRC Press. This book was released on 2019-06-07 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a timely and complete overview on chemical vapour deposition (CVD) and its variants for the processing of nanoparticles, nanowires, nanotubes, nanocomposite coatings, thin and thick films, and composites. Chapters discuss key aspects, from processing, material structure and properties to practical use, cost considerations, versatility, and sustainability. The author presents a comprehensive overview of CVD and its potential in producing high performance, cost-effective nanomaterials and thin and thick films. Features Provides an up-to-date introduction to CVD technology for the fabrication of nanomaterials, nanostructured films, and composite coatings Discusses processing, structure, functionalization, properties, and use in clean energy, engineering, and biomedical grand challenges Covers thin and thick films and composites Compares CVD with other processing techniques in terms of structure/properties, cost, versatility, and sustainability Kwang-Leong Choy is the Director of the UCL Centre for Materials Discovery and Professor of Materials Discovery in the Institute for Materials Discovery at the University College London. She earned her D.Phil. from the University of Oxford, and is the recipient of numerous honors including the Hetherington Prize, Oxford Metallurgical Society Award, and Grunfeld Medal and Prize from the Institute of Materials (UK). She is an elected fellow of the Institute of Materials, Minerals and Mining, and the Royal Society of Chemistry.
Download or read book Advances in Porous Semiconductor Research written by Thierry Djenizian and published by Frontiers Media SA. This book was released on 2020-03-30 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Advanced Photocatalytic Materials for Energy and Environmental Applications written by Juan M. Coronado and published by Springer Science & Business Media. This book was released on 2013-05-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research for the development of more efficient photocatalysts has experienced an almost exponential growth since its popularization in early 1970’s. Despite the advantages of the widely used TiO2, the yield of the conversion of sun power into chemical energy that can be achieved with this material is limited prompting the research and development of a number of structural, morphological and chemical modifications of TiO2 , as well as a number of novel photocatalysts with very different composition. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a systematic account of the current understanding of the relationships between the physicochemical properties of the catalysts and photoactivity. The already long list of photocatalysts phases and their modifications is increasing day by day. By approaching this field from a material sciences angle, an integrated view allows readers to consider the diversity of photocatalysts globally and in connection with other technologies. Design of Advanced Photocatalytic Materials for Energy and Environmental Applications provides a valuable road-map, outlining the common principles lying behind the diversity of materials, but also delimiting the imprecise border between the contrasted results and the most speculative studies. This broad approach makes it ideal for specialist but also for engineers, researchers and students in related fields.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:
