Download or read book Role of Surface Ligand Chemistry on Shape Evolution and Optoelecronic Properties of Direct Band Gap Semiconductors written by Meghan Teunis McLeod and published by . This book was released on 2017 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of the applications of direct band gap semiconductor nanocrystals (NCs) has been a result of the control colloidal synthetic methods offer on the optoelectronic properties. These properties are readily controlled by the surface chemistry and even a small change in the surface passivating ligand can show profound effects. Furthermore, the choice of surface passivating ligand also impacts the NC shape evolution, which in turn influence the surface area, quantum yield, and charge transport properties that are critical to optimize device fabrication. In this dissertation, the unique aspects of surface chemistry that control both NC shape evolution and optoelectronic properties are investigated. We began by investigating how surface chemistry controls the shape evolution of methyl ammonium lead bromide (CH3NH3PbBr3) perovskite NCs. In addition to the surface passivating ligand, the reaction temperature and solvent system were also examined. Through a series of control experiments, the critical parameter for the formation of quantum wires (QWs) was found to be the presence of a long chain acid, while the quantum platelets (QPLs) required a long chain amine and chlorinated solvent, and quantum cube (QC) formation was kinetically driven. The higher ordered stacking of the QPLs and bundling of the QWs was also found to be controlled by surface ligand chemistry. Next we further examined how surface chemistry impacts shape evolution, but in the system of metal chalcogenide NCs. We developed a versatile, low temperature, and gram scale synthesis of QWs, QPLs, and quantum rods (QRs) using both cadmium and zinc as metal precursors and sulfur and selenium as chalcogenide precursors. Through systematic investigation of both the surface chemistry and reaction progression, the growth and formation mechanism was also determined. The 1D QW growth required a long chain amine while the QPLs required the presence of both a long and short chain amine to drive 2D growth. Finally, the QRs would found to be a kinetically-controlled process. Ultrasmall semiconductor NCs are known to possess high surface to volume ratios and therefore even a minute change in surface chemistry will have a significant impact on the optoelectronic properties. Our investigation focused on (CdSe)34 NCs, and how exchanging native amine ligands with various chalcogenol based ligands influences these properties. These NCs lie in the strong confinement regime and therefore have a higher probability of undergoing exciton delocalization, resulting in red shifts of the first excitonic peak and reduction of the optical band gap. Additionally, we examined different characteristics of the ligand (level of conjugation, electron withdrawing or donating nature of para-substitution, binding mode and head group) to examine how these parameters impact exciton delocalization. We observed the highest shift in the optical band gap (of 650 meV) after exchanging the native amine ligands with pyrene dithiocarbamate. Through this investigation it was determined that ligand characteristics (specifically conjugation and binding mode) have significant influence in the proposed hole delocalization. Finally, we continued the investigation of how surface chemistry controls optoelectronic properties of ultrasmall NCs, but expand our work to those of methyl ammonium lead halide. We developed a low temperature and colloidal synthesis of white-light emitting NCs with a diameter of 1.5 nm. Through precise manipulation of the surface halide ions, it was possible to tailor the emission to match that of nearly pure white light.

Download or read book Wide Bandgap Based Devices written by Farid Medjdoub and published by MDPI. This book was released on 2021-05-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging wide bandgap (WBG) semiconductors hold the potential to advance the global industry in the same way that, more than 50 years ago, the invention of the silicon (Si) chip enabled the modern computer era. SiC- and GaN-based devices are starting to become more commercially available. Smaller, faster, and more efficient than their counterpart Si-based components, these WBG devices also offer greater expected reliability in tougher operating conditions. Furthermore, in this frame, a new class of microelectronic-grade semiconducting materials that have an even larger bandgap than the previously established wide bandgap semiconductors, such as GaN and SiC, have been created, and are thus referred to as “ultra-wide bandgap” materials. These materials, which include AlGaN, AlN, diamond, Ga2O3, and BN, offer theoretically superior properties, including a higher critical breakdown field, higher temperature operation, and potentially higher radiation tolerance. These attributes, in turn, make it possible to use revolutionary new devices for extreme environments, such as high-efficiency power transistors, because of the improved Baliga figure of merit, ultra-high voltage pulsed power switches, high-efficiency UV-LEDs, and electronics. This Special Issue aims to collect high quality research papers, short communications, and review articles that focus on wide bandgap device design, fabrication, and advanced characterization. The Special Issue will also publish selected papers from the 43rd Workshop on Compound Semiconductor Devices and Integrated Circuits, held in France (WOCSDICE 2019), which brings together scientists and engineers working in the area of III–V, and other compound semiconductor devices and integrated circuits. In particular, the following topics are addressed: – GaN- and SiC-based devices for power and optoelectronic applications – Ga2O3 substrate development, and Ga2O3 thin film growth, doping, and devices – AlN-based emerging material and devices – BN epitaxial growth, characterization, and devices

Download or read book Optoelectronic Properties of Graphene Based van der Waals Hybrids written by Kallol Roy and published by Springer Nature. This book was released on 2020-10-21 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the development and in-depth study of a new class of optoelectronic material platform comprising graphene and MoS_2, in which MoS_2 is used essentially to sensitize graphene and lead to unprecedently high gain and novel opto-electronic memory effects. The results presented here open up the possibility of designing a new class of photosensitive devices which can be utilized in various optoelectronic applications including biomedical sensing, astronomical sensing, optical communications, optical quantum information processing and in applications requiring low intensity photodetection and number resolved single photon detection.

Download or read book Electronic Structure and Quantized Surface Electron Accumulation of Narrow Band Gap Semiconductors written by Leyla Colakerol and published by . This book was released on 2009 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Narrow band gap semiconductors play a crucial role in thin film photovoltaic cells and optoelectronics devices operating in the infrared region of visible spectrum. The interactions between the valence and conduction bands due to the narrow band gap have a big influence on the electronic structure and the device performance of these materials. The surface and bulk electronic properties of narrow band gap semiconductors were investigated using angle resolved photoelectron spectroscopy (ARPES), x-ray absorption spectroscopy and x-ray emission spectroscopy. Comparisons were made between the experimental results and density functional theory band structure calculations. Intrinsic electron accumulation near the surface of clean InN was directly observed by ARPES. The accumulation layer is discussed in terms of the bulk Fermi level (E F) lying below the pinned surface E F, with a confining potential formed normal to surface due to the downward band bending facilitated by donor type surface states or nitrogen vacancies. Various spectroscopic techniques were used to measure this band bending. The energy of the Fermi level and the size of the Fermi surface for these quantum well states could be controlled by varying the method of surface preparation and by the adsorption of potassium on the surface. Intermixing between the heavy and light hole valence bands in the intrinsic quantum well potential associated with the surface electron accumulation layer results in an inverted band structure, with the valence band maximum lying away from the Brillouin zone center. Similarly, the electronic band structure of CdO was investigated and quantized electron subbands were observed above the valence band maximum. The origin of the accumulation layer is discussed in terms of the bulk band structure of CdO calculated using quasi particle corrected density functional theory. High electron density at the surface of these materials provides new opportunities for potential device structures such as sensors, high frequency transmitters and field effect transistors. Therefore the study of their near surface electron accumulation and electronic structure is of importance in understanding the properties of these materials and discovering new application areas.

Download or read book Semiconductor Nanocrystals written by Alexander L. Efros and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physics book that covers the optical properties of quantum-confined semiconductor nanostructures from both the theoretical and experimental points of view together with technological applications. Topics to be reviewed include quantum confinement effects in semiconductors, optical adsorption and emission properties of group IV, III-V, II-VI semiconductors, deep-etched and self assembled quantum dots, nanoclusters, and laser applications in optoelectronics.

Download or read book Growth and Characterization of Wide Bandgap Semiconductor Oxide Thin Films written by Susmita Ghose and published by . This book was released on 2017 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wide bandgap semiconductors are receiving extensive attention due to their exceptional physical and chemical properties making them useful for high efficiency and high power electronic devices. Comparing other conventional wide bandgap materials, monoclinic Îø-Ga2O3 also represents an outstanding semiconductor oxide for next generation of UV optoelectronics and high temperature sensors due to its wide band gap (~4.9eV). This new semiconductor material has higher breakdown voltage (8MV/cm) and n-type conductivity which make it more suitable for potential application as high power electronics. The properties and potential applications of these wide bandgap materials have not yet fully explored. In this study, the growth and characterization of single crystal b-Ga2O3 thin films grown on c-plane sapphire (Al2O3) substrate using two different techniques; molecular beam epitaxy (MBE) and pulsed laser deposition (PLD) techniques has been investigated. The influence of the growth parameters of MBE and PLD on crystalline quality and surface has been explored. Two methods have been used to grow Ga2O3 using MBE; one method is to use elemental Ga and the second is the use of a polycrystalline Ga2O3 compound source with and without an oxygen source. Using the elemental Ga source, growth rate of b-Ga2O3 thin films was limited due to the formation and desorption of Ga2O molecules. In order to mitigate this problem, a compound Ga2O3 source has been introduced and used for the growth of crystalline b-Ga2O3 thin films without the need for additional oxygen since this source produces Ga-O molecules and additional oxygen. Two different alloys (InGa)2O3 and (AlGa)2O3 has been grown on c-plane sapphire substrate by pulsed laser deposition technique to tune the bandgap of the oxide thin films from 3.5-8.6 eV suitable for applications such as wavelength-tunable optical devices, solid-state lighting and high electron mobility transistors (HEMTs). The crystallinity, chemical bonding, surface morphology and optical properties have been systematically evaluated by a number of in-situ and ex-situ techniques. The crystalline Ga2O3 films showed pure phase of (2 Ì501) plane orientation and in-plane XRD phi-scan exhibited the six-fold rotational symmetry for b-Ga2O3 when grown on sapphire substrate. The alloys exhibit different phases has been stabilized depending on the compositions. Finally, a metal-semiconductor-metal (MSM) structure deep-ultraviolet (DUV) photodetector has been fabricated on Îø-Ga2O3 film grown with an optimized growth condition has been demonstrated. This photodetector exhibited high resistance as well as small dark current with expected photoresponse for 254 nm UV light irradiation suggesting Îø-Ga2O3 thin films as a potential candidate for deep-UV photodetectors. While the grown Ga2O3 shows high resistivity, the electrical properties of (In0.6Ga0.4)2O3 and (In0.8Ga0.2)2O3 alloys show low resistivity with a high carrier concentration and increasing mobility with In content.

Download or read book Semiconductor Electrodes written by Harry O. Finklea and published by Elsevier Publishing Company. This book was released on 1988 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductors have been studied as electrodes in electrochemical systems since the mid-1950's. However, it was not until the 1970's that the search for alternative energy sources, especially solar energy, led to an enormous expansion in semiconductor electrode research. One attractive option for solar energy conversion is the semiconductor liquid-junction solar cell, which can be designed to produce either electrical power or fuel such as hydrogen. Consequently the number of papers published concerning semiconductor electrodes has rapidly increased. Previous books have principally focused on the underlying theory (largely from solid state physics) and principles of operation of all semiconductor electrodes. It therefore seemed both useful and appropriate to review the field with the intention of collating information for each semiconductor or family of semiconductors, with contributions from authors who are all recognized experts in their field. Each chapter is devoted to critically assessing the recent literature on a particular semiconductor or family of semiconductors.

Download or read book Inorganic Nanoparticles written by Claudia Altavilla and published by CRC Press. This book was released on 2017-12-19 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the various nanomaterials, inorganic nanoparticles are extremely important in modern technologies. They can be easily and cheaply synthesized and mass produced, and for this reason, they can also be more readily integrated into applications. Inorganic Nanoparticles: Synthesis, Applications, and Perspectives presents an overview of these special materials and explores the myriad ways in which they are used. It addresses a wide range of topics, including: Application of nanoparticles in magnetic storage media Use of metal and oxide nanoparticles to improve performance of oxide thin films as conducting media in commercial gas and vapor sensors Advances in semiconductors for light-emitting devices and other areas related to the energy sector, such as solar energy and energy storage devices (fuel cells, rechargeable batteries, etc.) The expanding role of nanosized particles in the field of catalysis, art conservation, and biomedicine The book’s contributors address the growing global interest in the application of inorganic nanoparticles in various technological sectors. Discussing advances in materials, device fabrication, and large-scale production—all of which are urgently required to reduce global energy demands—they cover innovations in areas such as solid-state lighting, detailing how it still offers higher efficiency but higher costs, compared to conventional lighting. They also address the impact of nanotechnology in the biomedical field, focusing on topics such as quantum dots for bioimaging, nanoparticle-based cancer therapy, drug delivery, antibacterial agents, and more. Fills the informational gap on the wide range of applications for inorganic nanoparticles in areas including biomedicine, electronics, storage media, conservation of cultural heritage, optics, textiles, and cosmetics Assembling work from an array of experts at the top of their respective fields, this book delivers a useful analysis of the vast scope of existing and potential applications for inorganic nanoparticles. Versatile as either a professional research resource or textbook, this effective tool elucidates fundamentals and current advances associated with design, characterization, and application development of this promising and ever-evolving device.

Download or read book Halide Perovskites written by Tze-Chien Sum and published by John Wiley & Sons. This book was released on 2019-03-25 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real insight from leading experts in the field into the causes of the unique photovoltaic performance of perovskite solar cells, describing the fundamentals of perovskite materials and device architectures. The authors cover materials research and development, device fabrication and engineering methodologies, as well as current knowledge extending beyond perovskite photovoltaics, such as the novel spin physics and multiferroic properties of this family of materials. Aimed at a better and clearer understanding of the latest developments in the hybrid perovskite field, this is a must-have for material scientists, chemists, physicists and engineers entering or already working in this booming field.

Download or read book Colloidal Quantum Dot Optoelectronics and Photovoltaics written by Gerasimos Konstantatos and published by Cambridge University Press. This book was released on 2013-11-07 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Captures the most up-to-date research in the field, written in an accessible style by the world's leading experts.

Download or read book Low Dimensional Solids written by Duncan W. Bruce and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: With physical properties that often may not be described by the transposition of physical laws from 3D space across to 2D or even 1D space, low-dimensional solids exhibit a high degree of anisotropy in the spatial distribution of their chemical bonds. This means that they can demonstrate new phenomena such as charge-density waves and can display nanoparticulate (0D), fibrous (1D) and lamellar (2D) morphologies. This text presents some of the most recent research into the synthesis and properties of these solids and covers: Metal Oxide Nanoparticles Inorganic Nanotubes and Nanowires Biomedical Applications of Layered Double Hydroxides Carbon Nanotubes and Related Structures Superconducting Borides Introducing topics such as novel layered superconductors, inorganic-DNA delivery systems and the chemistry and physics of inorganic nanotubes and nanosheets, this book discusses some of the most exciting concepts in this developing field. Additional volumes in the Inorganic Materials Book Series: Molecular Materials Functional Oxides Porous Materials Energy Materials All volumes are sold individually or as comprehensive 5 Volume Set.

Download or read book Monte Carlo Methods for Radiation Transport written by Oleg N. Vassiliev and published by Springer. This book was released on 2016-10-17 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a guide to the use of Monte Carlo techniques in radiation transport. This topic is of great interest for medical physicists. Praised as a "gold standard" for accurate radiotherapy dose calculations, Monte Carlo has stimulated a high level of research activity that has produced thousands of papers within the past few years. The book is designed primarily to address the needs of an academically inclined medical physicist who wishes to learn the technique, as well as experienced users of standard Monte Carlo codes who wish to gain insight into the underlying mathematics of Monte Carlo algorithms. The book focuses on the fundamentals—giving full attention to and explaining the very basic concepts. It also includes advanced topics and covers recent advances such as transport of charged particles in magnetic fields and the grid-based solvers of the Boltzmann equation.

Download or read book Solution Processable Components for Organic Electronic Devices written by Beata Luszczynska and published by John Wiley & Sons. This book was released on 2019-09-16 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides first-hand insights into advanced fabrication techniques for solution processable organic electronics materials and devices The field of printable organic electronics has emerged as a technology which plays a major role in materials science research and development. Printable organic electronics soon compete with, and for specific applications can even outpace, conventional semiconductor devices in terms of performance, cost, and versatility. Printing techniques allow for large-scale fabrication of organic electronic components and functional devices for use as wearable electronics, health-care sensors, Internet of Things, monitoring of environment pollution and many others, yet-to-be-conceived applications. The first part of Solution-Processable Components for Organic Electronic Devices covers the synthesis of: soluble conjugated polymers; solution-processable nanoparticles of inorganic semiconductors; high-k nanoparticles by means of controlled radical polymerization; advanced blending techniques yielding novel materials with extraordinary properties. The book also discusses photogeneration of charge carriers in nanostructured bulk heterojunctions and charge carrier transport in multicomponent materials such as composites and nanocomposites as well as photovoltaic devices modelling. The second part of the book is devoted to organic electronic devices, such as field effect transistors, light emitting diodes, photovoltaics, photodiodes and electronic memory devices which can be produced by solution-based methods, including printing and roll-to-roll manufacturing. The book provides in-depth knowledge for experienced researchers and for those entering the field. It comprises 12 chapters focused on: ? novel organic electronics components synthesis and solution-based processing techniques ? advanced analysis of mechanisms governing charge carrier generation and transport in organic semiconductors and devices ? fabrication techniques and characterization methods of organic electronic devices Providing coverage of the state of the art of organic electronics, Solution-Processable Components for Organic Electronic Devices is an excellent book for materials scientists, applied physicists, engineering scientists, and those working in the electronics industry.

Download or read book Annual Review of Physical Chemistry written by B. S. Rabinovitch and published by . This book was released on 1985 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanocrystal Quantum Dots written by Victor I. Klimov and published by CRC Press. This book was released on 2017-12-19 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review of recent advancements in colloidal nanocrystals and quantum-confined nanostructures, Nanocrystal Quantum Dots is the second edition of Semiconductor and Metal Nanocrystals: Synthesis and Electronic and Optical Properties, originally published in 2003. This new title reflects the book’s altered focus on semiconductor nanocrystals. Gathering contributions from leading researchers, this book contains new chapters on carrier multiplication (generation of multiexcitons by single photons), doping of semiconductor nanocrystals, and applications of nanocrystals in biology. Other updates include: New insights regarding the underlying mechanisms supporting colloidal nanocrystal growth A revised general overview of multiexciton phenomena, including spectral and dynamical signatures of multiexcitons in transient absorption and photoluminescence Analysis of nanocrystal-specific features of multiexciton recombination A review of the status of new field of carrier multiplication Expanded coverage of theory, covering the regime of high-charge densities New results on quantum dots of lead chalcogenides, with a focus studies of carrier multiplication and the latest results regarding Schottky junction solar cells Presents useful examples to illustrate applications of nanocrystals in biological labeling, imaging, and diagnostics The book also includes a review of recent progress made in biological applications of colloidal nanocrystals, as well as a comparative analysis of the advantages and limitations of techniques for preparing biocompatible quantum dots. The authors summarize the latest developments in the synthesis and understanding of magnetically doped semiconductor nanocrystals, and they present a detailed discussion of issues related to the synthesis, magneto-optics, and photoluminescence of doped colloidal nanocrystals as well. A valuable addition to the pantheon of literature in the field of nanoscience, this book presents pioneering research from experts whose work has led to the numerous advances of the past several years.

Download or read book Silicon Nanocrystals written by Lorenzo Pavesi and published by John Wiley & Sons. This book was released on 2010-02-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique collection of knowledge represents a comprehensive treatment of the fundamental and practical consequences of size reduction in silicon crystals. This clearly structured reference introduces readers to the optical, electrical and thermal properties of silicon nanocrystals that arise from their greatly reduced dimensions. It covers their synthesis and characterization from both chemical and physical viewpoints, including ion implantation, colloidal synthesis and vapor deposition methods. A major part of the text is devoted to applications in microelectronics as well as photonics and nanobiotechnology, making this of great interest to the high-tech industry.

Download or read book Colloidal Semiconductor Nanocrystals Synthesis Properties and Applications written by Vladimir Lesnyak and published by Frontiers Media SA. This book was released on 2020-01-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: