Download or read book Rock Mechanics Analysis of Enhanced Geothermal Energy Recovery written by Krishna Kumar Kamichetty and published by . This book was released on 2013 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Permeability enhancement during stimulation in a geothermal reservoir is mainly due to the development and extension of pre-existing fractures and joints in the rockmass. The success of this technique is primarily associated with a complex interaction between thermal, hydraulic, mechanical and chemical processes within the rockmass. Various solutions have been developed with the intention of modeling each single process and eventually couple them together in order to predict the resulting permeability and size of the man-created fracture network for given injection rates and rockmass properties. Different combinations of T-H-M-C processes have been studied and are largely based on theoretical frameworks [Taron, et al, 2009]. Most of the T-H-M-C applications occur in the fields of nuclear waste disposal, gas and oil recovery, and Hot Dry Rock Geothermal Systems. In Enhanced Geothermal Systems (EGS), fluid circulation in the fractured rocks is influenced in both the short term and long term by Thermal-Hydro-Mechanical deformation [Elsworth, et al, 2009]. There are many considerations in the design of EGS and most relate to the behavior of fractures. In this work, the Thermal-Hydraulic-Mechanical behavior of the fracture aperture in a Hot Dry Rock Enhanced Geothermal System is studied through numerical simulations of the Fenton Hill model site [Cramer et al, 1979] using a three dimensional distinct element code, 3DEC. A full study of the physical processes involved and their relation with the in-situ geological, structural, mechanical and hydrogeological conditions is a constant and essential component of the work. Different values of input parameters such as Young's modulus, Poisson's ratio, mechanical stresses, thermal load and fluid flow are applied to a planar fracture, and the resultant deformation of the fracture is obtained in the form of displacements. Coupled processes such as coupled T-M and H-M methods are employed and solved for the fracture aperture changes. From the study, it is found which of these individual parameters or coupled processes have significant effect on the fracture aperture change which in turn changes the modeling methods of an Enhanced Geothermal Reservoir. As a result the study offers a reference catalog of guidelines, directions and solutions for future considerations of EGS candidates and demonstrates the capability of the model as an assessment tool for the creation of fractures for an EGS energy recovery project.

Download or read book Gov Huntley N Spaulding written by and published by . This book was released on 1928 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic fracturing and geothermal energy written by S. Nemat-Nassar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing has been and continues to be a major techno logical tool in oil and gas recovery, nuclear and other waste disposal, mining and particularly in-situ coal gasification, and, more recently, in geothermal heat recovery, particularly extracting heat from hot dry rock masses. The understanding of the fracture process under the ac tion of pressurized fluid at various temperatures is of fundamental scientific importance, which requires an adequate description of thermomechanical properties of subsurface rock, fluid-solid interaction effects, as well as degradation of the host rock due to temperature gradients introduced by heat extraction. Considerable progress has been made over the past several years in laboratory experiments, analytical and numerical modeling, and in-situ field studies in various aspects of hydraulic fracturing and geothermal energy extraction, by researchers in the United States and Japan and also elsewhere. However, the results have been scattered throughout the literature. Therefore, the time seemed ripe for bringing together selected researchers from the two countries, as well as observers from other countries, in order to survey the state of the art, exchange scientific information, and establish closer collaboration for further, better coordinated scientific effort in this important area of research and exploration.

Download or read book Geomechanics and Geodynamics of Rock Masses written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-15 with total page 1670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

Download or read book Geomechanics and Geodynamics of Rock Masses Volume 1 written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-20 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is Volume 1 of the EUROCK 2018 proceedings. Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

Download or read book Geothermal Well Test Analysis written by Sadiq J. Zarrouk and published by Academic Press. This book was released on 2019-05-16 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Well Test Analysis: Fundamentals, Applications and Advanced Techniques provides a comprehensive review of the geothermal pressure transient analysis methodology and its similarities and differences with petroleum and groundwater well test analysis. Also discussed are the different tests undertaken in geothermal wells during completion testing, output/production testing, and the interpretation of data. In addition, the book focuses on pressure transient analysis by numerical simulation and inverse methods, also covering the familiar pressure derivative plot. Finally, non-standard geothermal pressure transient behaviors are analyzed and interpreted by numerical techniques for cases beyond the limit of existing analytical techniques. Provides a guide on the analysis of well test data in geothermal wells, including pressure transient analysis, completion testing and output testing Presents practical information on how to avoid common issues with data collection in geothermal wells Uses SI units, converting existing equations and models found in literature to this unit system instead of oilfield units

Download or read book Deep Rock Mechanics From Research to Engineering written by Heping Xie and published by CRC Press. This book was released on 2018-12-19 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: At present, deep earth resources remain poorly understood and entirely under-utilised. There is a growing appreciation of the important role deep earth will play in future sustainability, particularly in opportunities for new and sustainable large-scale energy alternatives, and extraction of resources through mining and greenhouse mitigation. Deep Rock Mechanics: From Research to Engineering is a collection of papers on the effective development of deep earth resources, which were presented at the International Conference on Geo-mechanics, Geo-Energy and Geo-Resources 2018 (Chengdu, P.R. China, 22-24 September 2018). The contributions aim at breaking beyond existing patterns of discovery, to advance research on geomechanical and geophysical processes in deep earth resources and energy development, enhancing deep earth energy and mineral extraction and mitigating harmful atmospheric emissions. Deep Rock Mechanics: From Research to Engineering covers a wide range of topics: 1. Deep rock mechanics and mining theory 2. Water resources development and protection 3. Unconventional oil and gas extractions 4. CO2 sequestrations technologies and nuclear waste disposal 5. Geothermal energy 6. Mining engineering 7. Petroleum engineering 8. Geo-environmental engineering 9. Civil geotechnical engineering Deep Rock Mechanics: From Research to Engineering promotes safer and greener ways for energy and resource production at great depth, and will serve as a must-have reference for academics and professionals involved or interested in geo-mechanics, geo-energy, and geo-resources.

Download or read book Thermomechanical Analysis of Rock Asperity in Fractures of Enhanced Geothermal Systems written by Chao Zeng and published by . This book was released on 2019 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Enhanced Geothermal Systems (EGS) offer great potential for dramatically expanding the use of geothermal energy and become a promising supplement for fossil energy. The EGS is to extract heat by creating a subsurface system to which cold water can be added through injection wells. Injected water is heated by contact with rock and returns to the surface through production well. Fracture provides the primary conduit for fluid flow and heat transfer in natural rock. Fracture is propped by fracture roughness with varying heights which is called asperity. The stability of asperity determines fracture aperture and hence imposes substantial effect on hydraulic conductivity and heat transfer efficiency in EGS. Firstly, two rough fracture surfaces are characterized by statistical method and fractal analysis. The asperity heights and enclosed aperture heights are described by probability density function before cold water is pumped into fracture. Secondly, when water injection and induced cooling occurs, the thermomechanical analysis of single asperity is studied by establishing an un-symmetric damage mechanics model. The deformation curve of asperity under thermal stress is determined. Thirdly, deformation of fracture with various asperities on it in response to thermal stress is analyzed by a new stratified continuum percolation model. This model incorporates the fracture surface characteristics and preceding deformation curve of asperity. The fracture closure and fracture stiffness can be accurately quantified by this model. In addition, the scaling invariance and multifractal parameters in this process are identified and validated with Monte Carlo simulation"--Abstract, page iii.

Download or read book Enhanced Geothermal Systems EGS written by Dornadula Chandrasekharam and published by CRC Press. This book was released on 2023-10-02 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peter Meisen, Past President, Global Energy Network Institute, asked in 1997, “What if there was an existing, viable technology, that when developed to its highest potential could increase everyone’s standard of living, cut fossil fuel demand and the resultant pollution?” After 23 years of sustained effort by the global scientific community, this is becoming a reality. The technology to extract heat from granite has been revolutionized in the last few years. The classical method of creating fracture networks by hydrofracturing is being replaced by a closed-loop method where fluids are not in contact with the hot granite. Supercritical CO2 is replacing water as a circulating fluid. Certainly, the future energy road is going to be led by highly radiogenic granites. While hydrothermal sources are site-specific and have their limitations, EGS can be initiated anywhere on earth. EGS is removing all such obstacles and, in the future, will provide uninterrupted electricity for all. Energy-deficient countries can have surplus electricity; water-stressed countries can have a perennial freshwater supply; and countries can become food-secure and rise above poverty levels. Countries need not depend on energy imports and can independently evolve into carbon neutral or low carbon societies. The contributions made by experts will help researchers and investors to close the energy demand and supply gap in the very near future by tapping the unlimited energy of the Earth. Opportunities available for investors in Turkey are well documented with field, geophysical, and geochemical data and information on the energy generating capacity of the granite intrusive spread over a cumulative area of 6,910 km2 in western Anatolia. With the signing of the Global Geothermal Alliance (GGA) by several countries during the December 2015 CoP 21 (Conference of Parties) summit in Paris, countries are obliged to reduce CO2 emissions by increasing the footprint of renewable energy in the primary source mix. Information provided in this book will lead the way to establishing a clean energy future for millions of people for sustainable development and help to mitigate crises arising due to food, water, and energy shortage issues. Academic and research institutes will benefit to a large extent from the expertise of the top contributors in this book. This information provided in this book will help to lay the foundation for super-hot EGS research in future.

Download or read book Rock mechanics Research Requirements for Resource Recovery Construction and Earthquake hazard Reduction written by U.S. National Committee for Rock Mechanics. Panel on Rock-mechanics Research Requirements and published by National Academies. This book was released on 1981 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geothermal Power Plants written by Ronald DiPippo and published by Elsevier. This book was released on 2011-04-08 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ron DiPippo, Professor Emeritus at the University of Massachusetts Dartmouth, is a world-regarded geothermal expert. This single resource covers all aspects of the utilization of geothermal energy for power generation from fundamental scientific and engineering principles. The thermodynamic basis for the design of geothermal power plants is at the heart of the book and readers are clearly guided on the process of designing and analysing the key types of geothermal energy conversion systems. Its practical emphasis is enhanced by the use of case studies from real plants that increase the reader's understanding of geothermal energy conversion and provide a unique compilation of hard-to-obtain data and experience. An important new chapter covers Environmental Impact and Abatement Technologies, including gaseous and solid emissions; water, noise and thermal pollutions; land usage; disturbance of natural hydrothermal manifestations, habitats and vegetation; minimisation of CO2 emissions and environmental impact assessment.The book is illustrated with over 240 photographs and drawings. Nine chapters include practice problems, with solutions, which enable the book to be used as a course text. Also includes a definitive worldwide compilation of every geothermal power plant that has operated, unit by unit, plus a concise primer on the applicable thermodynamics.* Engineering principles are at the heart of the book, with complete coverage of the thermodynamic basis for the design of geothermal power systems* Practical applications are backed up by an extensive selection of case studies that show how geothermal energy conversion systems have been designed, applied and exploited in practice* World renowned geothermal expert DiPippo has including a new chapter on Environmental Impact and Abatement Technology in this new edition

Download or read book Rock Mechanics and Rock Engineering From the Past to the Future written by Reşat Ulusay and published by CRC Press. This book was released on 2016-11-18 with total page 1371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics and Rock Engineering: From the Past to the Future contains the contributions presented at EUROCK2016, the 2016 International Symposium of the International Society for Rock Mechanics (ISRM 2016, Ürgüp, Cappadocia Region, Turkey, 29-31 August 2016). The contributions cover almost all aspects of rock mechanics and rock engineering from theories to engineering practices, emphasizing the future direction of rock engineering technologies. The 204 accepted papers and eight keynote papers, are grouped into several main sections: - Fundamental rock mechanics - Rock properties and experimental rock mechanics - Analytical and numerical methods in rock engineering - Stability of slopes in civil and mining engineering - Design methodologies and analysis - Rock dynamics, rock mechanics and rock engineering at historical sites and monuments - Underground excavations in civil and mining engineering - Coupled processes in rock mass for underground storage and waste disposal - Rock mass characterization - Petroleum geomechanics - Carbon dioxide sequestration - Instrumentation-monitoring in rock engineering and back analysis - Risk management, and - the 2016 Rocha Medal Lecture and the 2016 Franklin Lecture Rock Mechanics and Rock Engineering: From the Past to the Future will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2016, organized by the Turkish National Society for Rock Mechanics, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.

Download or read book Limitations of Rock Mechanics in Energy resource Recovery and Development written by and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock-mechanics problems which limit energy-resource recovery and development are assessed. The most serious limitations were found in the fields of geothermal exploration, mining and in-situ recovery, nuclear-waste disposal, oil and gas recovery, underground storage, and under-ocean tunneling. Recommendations include research to determine and predict porosity, permeability, and fluid flow in situ; research to develop better methods for determining and obtaining shallow and deep in situ stresses; research to improve the ability to map fracture patterns, particularly major fractures and faults, at depth; research to improve the understanding of rock-fragmentation processes for increasing the effectiveness of drilling and excavation systems; research to increase understanding of the relation of laboratory-measured quantities to in situ conditions; and research to provide the thermophysical and thermomechanical properties of rock, including fractured rock. (JRD).

Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Challenges in Rock Mechanics and Rock Engineering written by Roberto Tomás and published by CRC Press. This book was released on 2024-07-29 with total page 1585 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Challenges in Rock Mechanics and Rock Engineering includes the contributions presented at the ISRM European Rock Mechanics Symposium Eurock 2024 (Alicante, Spain, 15-19 July 2024), and explores cutting-edge advancements in rock mechanics and rock engineering. This comprehensive compilation covers various aspects of rock mechanics and rock engineering, including: rock properties, testing methods, infrastructure and mining rock mechanics, design analysis, stone heritage preservation, geophysics, numerical modeling, monitoring techniques, underground excavation support, risk assessment, and the application of EUROCODE-7 in rock engineering. Furthermore, it addresses areas like geomechanics for the oil and gas industry, applications of artificial intelligence, remote sensing methodologies and geothermal technology. New Challenges in Rock Mechanics and Rock Engineering covers the latest breakthroughs and tackles the new challenges in rock mechanics and rock engineering, is aimed at scientists and professionals in these fields, and serves as an essential resource for keeping up to date with industry trends and solutions.

Download or read book Petroleum Related Rock Mechanics written by Erling Fjær and published by Elsevier. This book was released on 2021-12-08 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers and geologists in the petroleum industry will find Petroleum Related Rock Mechanics, Third Edition, to be a powerful resource in providing a basis for rock mechanical knowledge, which can greatly assist in the understanding of field behavior, design of test programs, and the design of field operations. Not only does this text provide specific applications of rock mechanics used within the petroleum industry, it has a strong focus on basics like drilling, production, and reservoir engineering. Assessment of rock mechanical parameters is covered in depth, as is acoustic wave propagation in rocks, with possible link to 4D seismic as well as log interpretation. Petroleum Related Rock Mechanics, Third Edition, is updated to include new topics such as formation barriers around cased wells, finite element analysis, multicomponent models, acoustic emissions and elliptical holes. It also includes updated and expanded coverage of shale reservoirs, hydraulic fracturing, and carbon capture and sequestration. - Presents the basic principles behind rock mechanics from leading academic and industry experts - Provides a guide for engineers and geologists to use while working in the field - New topics included in this edition: formation barriers around cased wells, finite element analysis, multicomponent models, acoustic emissions and elliptical holes

Download or read book Geothermal Energy Update written by and published by . This book was released on 1976 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: