Download or read book Engineering Rock Mass Classifications written by Z. T. Bieniawski and published by John Wiley & Sons. This book was released on 1989-08-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first authoritative reference on rock mass classification, consolidating into one handy source information once widely scattered throughout the literature. It includes new, previously unpublished material and case histories, presents the fundamental concepts of classification schemes, and critically appraises their practical application in industrial projects such as tunneling and mining.
Download or read book Engineering Rock Mass Classification written by R K Goel and published by Elsevier. This book was released on 2011-08-09 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton's Q and Q' systems, Bieniawski's RMR, Laubscher's MRMR and Hoek's and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. - Identify the most significant parameters influencing the behaviour of a rock mass - Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality - Provide a basis of understanding the characteristics of each rock mass class - Relate the experience of rock conditions at one site to the conditions and experience encountered at others - Derive quantitative data and guidelines for engineering design - Provide common basis for communication between engineers and geologists
Download or read book Rock Engineering written by Arild Palmstrom and published by ICE Publishing. This book was released on 2014-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering is a valuable reference tool for geotechnical engineers, geologists, consultants, contractors, and advanced students on rock engineering and engineering geology courses.
Download or read book Engineering Properties of Rocks written by Lianyang Zhang and published by Butterworth-Heinemann. This book was released on 2016-09-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: More often than not, it is difficult or even impossible to obtain directly the specific rock parameters of interest using in situ methods. The procedures for measuring most rock properties are also time consuming and expensive. Engineering Properties of Rocks, Second Edition, explores the use of typical values and/or empirical correlations of similar rocks to determine the specific parameters needed. The book is based on the author's extensive experience and offers a single source of information for the evaluation of rock properties. It systematically describes the classification and characterization of intact rock, rock discontinuities, and rock masses, and presents the various indirect methods for estimating the deformability, strength, and permeability of these components as well as the in situ rock stresses. - Presents a single source for the correlations on rock properties - Saves time and resources invested on in situ testing procedures - Fully updated with current literature - Expanded coverage of rock types and geographical locations
Download or read book TBM Tunnelling in Jointed and Faulted Rock written by Nick R. Barton and published by CRC Press. This book was released on 2000-01-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide describes the stage-by-stage development of a method for predicting the penetration rate (PR) and the advance rate (AR) for tunnel boring machines based on an expanded version of the Q-value, QTBM. The author analyzes 145 TBM tunnels that total 1,000km in length. He then develops simple formulae to estimate PR and AR from the QTBM value and to back-calculate QTBM from performance data. The book quantitatively explains actual advance rates as high as five m/hr for one day or as low as 0.005 m/hr for several months. It also covers logging methods, empirical TBM tunnel support design, and numerical verification of support.
Download or read book Soft Rock Mechanics and Engineering written by Milton Kanji and published by Springer Nature. This book was released on 2019-11-24 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.
Download or read book Tectonic Faults written by Mark R. Handy and published by MIT Press. This book was released on 2007 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists examine tectonic faulting on all scales--from seismic fault slip to the formation of mountain ranges--and discuss its connection to a wide range of global phenomena, including long-term climate change and evolution. Tectonic faults are sites of localized motion, both at the Earth's surface and within its dynamic interior. Faulting is directly linked to a wide range of global phenomena, including long-term climate change and the evolution of hominids, the opening and closure of oceans, and the rise and fall of mountain ranges. In Tectonic Faults, scientists from a variety of disciplines explore the connections between faulting and the processes of the Earth's atmosphere, surface, and interior. They consider faults and faulting from many different vantage points--including those of surface analysts, geochemists, material scientists, and physicists--and in all scales, from seismic fault slip to moving tectonic plates. They address basic issues, including the imaging of faults from Earth's surface to the base of the lithosphere and deeper, the structure and rheology of fault rocks, and the role of fluids and melt on the physical properties of deforming rock. They suggest strategies for understanding the interaction of faulting with topography and climate, predicting fault behavior, and interpreting the impacts on the rock record and the human environment. Using an Earth Systems approach, Tectonic Faults provides a new understanding of feedback between faulting and Earth's atmospheric, surface, and interior processes, and recommends new approaches for advancing knowledge of tectonic faults as an integral part of our dynamic planet.
Download or read book Coal Mine Roof Rating CMRR written by Gregory M. Molinda and published by . This book was released on 1994 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Support of Underground Excavations in Hard Rock written by E. Hoek and published by CRC Press. This book was released on 2000-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and economical construction of tunnels, mines, and other subterranean works depends on the correct choice of support systems to ensure that the excavations are stable. These support systems should be matched to the characterstics of the rock mass and the excavation techniques adopted. Establishing the support requirements, designing support systems and installing these correctly are essential elements in safe underground construction. This is a comprehensive and practical work which also gives access to user-friendly computer programmes which enable the investigation and design of support techniques. Details on how to obtain this software are also included in the book.
Download or read book Rock Classification Systems for Engineering Purposes written by Louis Kirkaldie and published by ASTM International. This book was released on 1988 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Practice of Tunnel Engineering written by Hasan Tosun and published by BoD – Books on Demand. This book was released on 2022-05-25 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnel construction is expensive when compared to the construction of other engineering structures. As such, there is always the need to develop more sophisticated and effective methods of construction. There are many long and large tunnels with various purposes in the world, especially for highways, railways, water conveyance, and energy production. Tunnels can be designed effectively by means of two and three-dimensional numerical models. Ground–structure interaction is one of the significant factors acting on economic and safe design. This book presents recent data on tunnel engineering to improve the theory and practice of the construction of underground structures. It provides an overview of tunneling technology and includes chapters that address analytical and numerical methods for rock load estimation and design support systems and advances in measurement systems for underground structures. The book discusses the empirical, analytical, and numerical methods of tunneling practice worldwide.
Download or read book The Influence of Joint Properties in Modelling Jointed Rock Masses written by Nick Barton and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Risk in Rock Tunnels written by Antnio Campos e Matos and published by CRC Press. This book was released on 2006-06-08 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnels have a high degree of risk that needs to be assessed and managed. Underground works intersect and interact with natural materials, incorporating their characteristics as structural components of their own stability. For this reason geotechnical risk analyses are implemented at all phases of tunnel construction, from design through to post-c
Download or read book Technical Manual for Design and Construction of Road Tunnels civil Elements written by and published by AASHTO. This book was released on 2010 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The increased use of underground space for transportation systems and the increasing complexity and constraints of constructing and maintaining above ground transportation infrastructure have prompted the need to develop this technical manual. This FHWA manual is intended to be a single-source technical manual providing guidelines for planning, design, construction and rehabilitation of road tunnels, and encompasses various types of road tunnels"--P. ix.
Download or read book North American Tunneling 2014 Proceedings written by Davidson, Gregg and published by Society for Mining, Metallurgy, and Exploration. This book was released on 2014-06-17 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The North American Tunneling Conference is the premier forum to discuss new trends and developments in underground construction in North America. With every conference, the number of attendees and breadth of topics grows. North American Tunneling: 2014 Proceedings reflects the theme for the 2014 conference, “Mission Possible.” The authors share new theories, novel innovations, and the latest tools that make what once may have been perceived as impossible, now possible. The authors of 128 papers share the latest case histories, expertise, lessons learned, and real-world applications from around the globe on a wide range of topics. They cover the successes and failures of challenging construction projects. Read about challenging design issues, fresh approaches on performance, future projects, and industry trends as well as ground movement and support, structure analysis, risk and cost management, rock tunnels, caverns and shafts, TBM technology and selection, and water and wastewater conveyance.
Download or read book Tunnelling Contracts and Site Investigation written by Dr P.B. Attewell and published by CRC Press. This book was released on 1995-08-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide ranging and up-to-date review of experience of tunnelling contracts, particularly those for sewerage and drainage tunnels. The review is based on the 6th edition of the ICE Conditions of Contract, but it takes note of new forms of contract which are leading towards less adversarial contractual relations.^
Download or read book Practical Tunnel Construction written by Gary B. Hemphill and published by John Wiley & Sons. This book was released on 2012-10-05 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only modern guide to all aspects of practical tunnel construction Practical Tunnel Construction fills a void in the literature for a practical guide to tunnel construction. By taking the reader through a brief introduction and history to a comprehensive discussion of how the geological factors affect tunneling, the author covers the stages and technology that are common today without using complex equations. Written for the individual who does not have an extensive background in tunneling but who has to make tunneling decisions, the various tunneling methods are discussed to help in the determination of the appropriate method. The methods discussed are: hand mining, drill/blast, Tunnel Boring Machine (TBM), New Austrian Tunnelling Method (NATM), Norwegian Method of Tunnelling (NMT), Roadheader, Earth Pressure Balance Machine (EPBM), and Slurry Pressure Balance Machine (SPBM). This book focuses on driven tunnels. This versatile handbook: Offers clear and accessible coverage of the state of the art in tunnel construction Introduces the essentials of design and construction of many types of tunnels, including TBM, EPB, Roadheader, NATM, drill and blast, and soft ground tunneling Provides nontechnical guidance on selecting the most appropriate tunneling methods for various situations Includes a brief history of tunneling and an introduction to geotechnical considerations Discusses tunnel access shaft construction, mucking methods, tunnel haulage, grout, water handling, and much more Practical Tunnel Construction is an important resource for students, construction managers, tunnel designers, municipal engineers, or engineers who are employed by government agencies or corporations that are exploring the feasibility of planning and designing or building a tunnel.
