Download or read book Reliability and Robust Design in Automotive Engineering written by and published by . This book was released on 2004 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Design Methodology for Reliability written by Bo Bergman and published by John Wiley & Sons. This book was released on 2009-08-18 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on deep theoretical as well as practical experience in Reliability and Quality Sciences, Robust Design Methodology for Reliability constructively addresses practical reliability problems. It offers a comprehensive design theory for reliability, utilizing robust design methodology and six sigma frameworks. In particular, the relation between un-reliability and variation and uncertainty is explored and reliability improvement measures in early product development stages are suggested. Many companies today utilise design for Six Sigma (DfSS) for strategic improvement of the design process, but often without explicitly describing the reliability perspective; this book explains how reliability design can relate to and work with DfSS and illustrates this with real–world problems. The contributors advocate designing for robustness, i.e. insensitivity to variation in the early stages of product design development. Methods for rational treatment of uncertainties in model assumptions are also presented. This book promotes a new approach to reliability thinking that addresses the design process and proneness to failure in the design phase via sensitivity to variation and uncertainty; includes contributions from both academics and industry practitioners with a broad scope of expertise, including quality science, mathematical statistics and reliability engineering; takes the innovative approach of promoting the study of variation and uncertainty as a basis for reliability work; includes case studies and illustrative examples that translate the theory into practice. Robust Design Methodology for Reliability provides a starting point for new thinking in practical reliability improvement work that will appeal to advanced designers and reliability specialists in academia and industry including fatigue engineers, product development and process/ quality professionals, especially those interested in and/ or using the DfSS framework.

Download or read book Fundamentals of Design of Experiments for Automotive Engineering Volume I written by Young J. Chiang and published by SAE International. This book was released on 2023-11-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world where innovation and sustainability are paramount, Fundamentals of Design of Experiments for Automotive Engineering: Volume I serves as a definitive guide to harnessing the power of statistical thinking in product development. As first of four volumes in SAE International’s DOE for Product Reliability Growth series, this book presents a practical, application-focused approach by emphasizing DOE as a dynamic tool for automotive engineers. It showcases real-world examples, demonstrating how process improvements and system optimizations can significantly enhance product reliability. The author, Yung Chiang, leverages extensive product development expertise to present a comprehensive process that ensures product performance and reliability throughout its entire lifecycle. Whether individuals are involved in research, design, testing, manufacturing, or marketing, this essential reference equips them with the skills needed to excel in their respective roles. This book explores the potential of Reliability and Sustainability with DOE, featuring the following topics: - Fundamental prerequisites for deploying DOE: Product reliability processes, measurement uncertainty, failure analysis, and design for reliability. - Full factorial design 2K: A system identification tool for relating objectives to factors and understanding main and interactive effects. - Fractional factorial design 2RK-P: Ideal for identifying main effects and 2-factor interactions. - General fractional factorial design LK-P: Systematically identification of significant inputs and analysis of nonlinear behaviors. - Composite designs as response surface methods: Resolving interactions and optimizing decisions with limited factors. - Adapting to practical challenges with “short” DOE: Leveraging optimization schemes like D-optimality, and A-optimality for optimal results. Readers are encouraged not to allow product failures to hinder progress but to embrace the "statistical thinking" embedded in DOE. This book can illuminate the path to designing products that stand the test of time, resulting in satisfied customers and thriving businesses. (ISBN 9781468606027, ISBN 9781468606034, ISBN 9781468606041, DOI 10.4271/9781468606034)

Download or read book Reliability in Automotive and Mechanical Engineering written by Bernd Bertsche and published by Springer Science & Business Media. This book was released on 2008-04-30 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects generate a great economic problem for suppliers who are faced with increased duties. Customers expect increased efficiency and dependability of technical product of - also growing - complexity. The authors give an introduction to a theory of dependability for engineers. The book may serve as a reference book as well, enhancing the knowledge of the specialists and giving a lot of theoretical background and information, especially on the dependability analysis of whole systems.

Download or read book Engineering Design Reliability Handbook written by Efstratios Nikolaidis and published by CRC Press. This book was released on 2004-12-22 with total page 1216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers in the engineering industry and academia are making important advances on reliability-based design and modeling of uncertainty when data is limited. Non deterministic approaches have enabled industries to save billions by reducing design and warranty costs and by improving quality. Considering the lack of comprehensive and defini

Download or read book Guide to Load Analysis for Durability in Vehicle Engineering written by P. Johannesson and published by John Wiley & Sons. This book was released on 2013-08-29 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: The overall goal of vehicle design is to make a robust and reliable product that meets the demands of the customers and this book treats the topic of analysing and describing customer loads with respect to durability. Guide to Load Analysis for Vehicle and Durability Engineering supplies a variety of methods for load analysis and also explains their proper use in view of the vehicle design process. In Part I, Overview, there are two chapters presenting the scope of the book as well as providing an introduction to the subject. Part II, Methods for Load Analysis, describes useful methods and indicates how and when they should be used. Part III, Load Analysis in view of the Vehicle Design Process, offers strategies for the evaluation of customer loads, in particular characterization of customer populations, which leads to the derivation of design loads, and finally to the verification of systems and components. Key features: • Is a comprehensive collection of methods for load analysis, vehicle dynamics and statistics • Combines standard load data analysis methods with statistical aspects on deriving test loads from surveys of customer usage • Sets the methods used in the framework of system dynamics and response, and derives recommendations for the application of methods in engineering practice • Presents a reliability design methodology based on statistical evaluation of component strength and customers loads • Includes case studies and illustrative examples that translate the theory into engineering practice Developed in cooperation with six European truck manufacturers (DAF, Daimler, Iveco, MAN, Scania and Volvo) to meet the needs of industry, Guide to Load Analysis for Vehicle and Durability Engineering provides an understanding of the current methods in load analysis and will inspire the incorporation of new techniques in the design and test processes.

Download or read book Engineering Design Reliability Applications written by Efstratios Nikolaidis and published by CRC Press. This book was released on 2007-09-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current, increasingly aggressive business environment, crucial decisions about product design often involve significant uncertainty. Highlighting the competitive advantage available from using risk-based reliability design, Engineering Design Reliability Applications: For the Aerospace, Automotive, and Ship Industries provides an overview of

Download or read book Next Generation HALT and HASS written by Kirk A. Gray and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next Generation HALT and HASS presents a major paradigm shift from reliability prediction-based methods to discovery of electronic systems reliability risks. This is achieved by integrating highly accelerated life test (HALT) and highly accelerated stress screen (HASS) into a physics-of-failure-based robust product and process development methodology. The new methodologies challenge misleading and sometimes costly mis-application of probabilistic failure prediction methods (FPM) and provide a new deterministic map for reliability development. The authors clearly explain the new approach with a logical progression of problem statement and solutions. The book helps engineers employ HALT and HASS by illustrating why the misleading assumptions used for FPM are invalid. Next, the application of HALT and HASS empirical discovery methods to quickly find unreliable elements in electronics systems gives readers practical insight to the techniques. The physics of HALT and HASS methodologies are highlighted, illustrating how they uncover and isolate software failures due to hardware-software interactions in digital systems. The use of empirical operational stress limits for the development of future tools and reliability discriminators is described. Key features: * Provides a clear basis for moving from statistical reliability prediction models to practical methods of insuring and improving reliability. * Challenges existing failure prediction methodologies by highlighting their limitations using real field data. * Explains a practical approach to why and how HALT and HASS are applied to electronics and electromechanical systems. * Presents opportunities to develop reliability test discriminators for prognostics using empirical stress limits. * Guides engineers and managers on the benefits of the deterministic and more efficient methods of HALT and HASS. * Integrates the empirical limit discovery methods of HALT and HASS into a physics of failure based robust product and process development process.

Download or read book Automotive Electronics Reliability written by Ronald K Jurgen and published by SAE International. This book was released on 2010-08-10 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle reliability problems continue to be the news because of major vehicle recalls from several manufacturers. This book includes 40 SAE technical papers, published from 2007 through 2010, that describe the latest research on automotive electronics reliability technology. This book will help engineers and researchers focus on the design strategies being used to minimize electronics reliability problems, and how to test and verify those strategies. After an overview of durability, risk assessment, and failure mechanisms, this book focuses on state-of-the-art techniques for reliability-based design, and reliability testing and verification. Topics include: powertrain control monitoring distributed automotive embedded systems model-based design x-by-wire systems battery durability design verification fault tree analysis The book also includes editor Ronald K. Jurgen’s introduction ,“Striving for Maximum Reliability in a Highly Complex Electronic Environment”, and a concluding section on the future of electronics reliability, including networking technology, domain control units, the use of AUTOSAR, and embedded software.

Download or read book Designing Capable and Reliable Products written by J. D. Booker and published by Butterworth-Heinemann. This book was released on 2001-04-03 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical methods for analysing mechanical designs with respect to their capability and reliability are combined in this volume. The book is written with postgraduate students and professional engineers in mind.

Download or read book Product Design and Testing for Automotive Engineering Volume II written by Young J. Chiang and published by SAE International. This book was released on 2024-09-17 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure modes and effects analysis (FMEA); Reliability; Product Development; Design Process; Test Procedures "Explore Product Design and Testing for Automotive Engineering: Volume II, an essential guide reshaping vehicle manufacturing with unprecedented reliability. As part of SAE International’s DOE for Product Reliability Growth series, this practical resource introduces cutting-edge methodologies crucial for predicting and improving product reliability in an era of automotive electrification. The book navigates statistical tolerance design, showcasing how variability in part fabrication and assembly can enhance reliability and sustainability. Key topics include: - Statistical tolerance design's impact on manufacturing and material selection, focusing on non-normal distributions' effects on product assembly and cost. Methods like maximum likelihood estimators and Monte Carlo simulations are used for assembly strategy synthesis. - Reliability DOEs using log-location-scale distributions to estimate lifetimes of non-normally distributed components, especially in accelerated life testing. It covers transformations optimizing parts and system designs under the lognormal distribution. - Weibull distribution (DOE-W) for characterizing lifetimes affected by various failure modes, detailing parameter assessment methods and real-world applications. The book also introduces reliability design of experiments based on the exponential distribution (DOE-E). - Importance of predicting lifecycles and enhancing reliability through qualitative and stepwise accelerated life tests. Integration of physics of failure with statistical methods like Weibull statistics and lognormal approximation enhances analysis credibility. - Inferential mechanisms such as the Arrhenius and Eyring models in predicting automotive component lifecycles, refining product life prediction based on reliability DOEs. Whether you're an engineer, researcher, or automotive professional, this book equips you to navigate reliability engineering confidently. Revolutionize your approach to product design and testing with Product Design and Testing for Automotive Engineering, your definitive companion in shaping the future of automotive reliability." (ISBN 9781468607703 ISBN 9781468607697 ISBN 9781468607727 DOI 10.4271/9781468607697)

Download or read book Proceedings of the 19th Asia Pacific Automotive Engineering Conference SAE China Congress 2017 Selected Papers written by Society of Automotive Engineers (SAE-China) and published by Springer. This book was released on 2018-10-06 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings volume gathers outstanding papers submitted to the 19th Asia Pacific Automotive Engineering Conference & 2017 SAE-China Congress, the majority of which are from China – the largest car-maker as well as most dynamic car market in the world. The book covers a wide range of automotive topics, presenting the latest technical advances and approaches to help technicians solve the practical problems that most affect their daily work.

Download or read book Reliability Design of Mechanical Systems written by Seongwoo Woo and published by Springer. This book was released on 2019-07-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.

Download or read book Life Cycle Reliability Engineering written by Guang Yang and published by John Wiley & Sons. This book was released on 2007-02-02 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the Lead Reliability Engineer for Ford Motor Company, Guangbin Yang is involved with all aspects of the design and production of complex automotive systems. Focusing on real-world problems and solutions, Life Cycle Reliability Engineering covers the gamut of the techniques used for reliability assurance throughout a product's life cycle. Yang pulls real-world examples from his work and other industries to explain the methods of robust design (designing reliability into a product or system ahead of time), statistical and real product testing, software testing, and ultimately verification and warranting of the final product's reliability

Download or read book International Conference on Statistics and Analytical Methods in Automotive Engineering written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2002-11-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: These IMechE conference transactions examine how major improvements have been made in product delivery processes by the effective use of both statistical and analytical methods, as well as examining the problems that can occur as a result of under utilization of information. This volume will be of great interest to managers, engineers, and statisticians at all levels, engaged in project management or the design and development of motor vehicles, their subsystems, and components. CONTENTS INCLUDE Applications of advanced modelling methods in engine development Application of adaptive online DoE techniques for engine ECU calibration Radial basis functions for engine modelling Designing for Six Sigma reliability Dimensional variation analysis for automotive hybrid aluminium body structures Reliability-based multidisciplinary design optimization of vehicle structures

Download or read book Model Driven Development of Reliable Automotive Services written by Manfred Broy and published by Springer Science & Business Media. This book was released on 2008-07-14 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-workshop proceedings of the Second Automotive Software Workshop, ASWSD 2006, held in San Diego, CA, USA in March 2006. The 11 revised full papers presented were carefully reviewed and selected from 18 lectures held at the workshop, that brought together experts from industry and academia, working on highly complex, distributed, reactive software systems related to the automotive domain. The papers are organized in topical sections on modeling techniques and infrastructures, model transformations, quality assurance, real-time control, as well as services and components.

Download or read book Design of Mechanical Systems Based on Statistics written by Seong-woo Woo and published by CRC Press. This book was released on 2021-05-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces and explains the parametric accelerated life testing (ALT) methodology as a new reliability methodology based on statistics, to help avoid recalls of products in the marketplace. The book includes problems and case studies to help with reader comprehension. It provides an introduction to reliability design of the mechanical system as an alternative to Taguchi’s experimental methodology and enables engineers to correct faulty designs and determine if the targeted product reliability is achieved. Additionally, it presents a robust design methodology of mechanical products to withstand a variety of loads. This book is intended for engineers of many fields, including industrial engineers, mechanical engineers, and systems engineers.