Download or read book Robotic Manipulation Strategies written by M. A. Peshkin and published by . This book was released on 1990 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robots don't always need expensive, dedicated fixtures for workpart positioning; table-top manipulation is possible and the sliding that occurs can be used to advantage if it is well understood. The author offers methods of automating the design of robot manipulation strategies reliant on sliding and friction. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.

Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.

Download or read book Planning robotic manipulation strategies for sliding objects written by Michael A. Peshkin and published by . This book was released on 1986 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.

Download or read book Mechanics of Robotic Manipulation written by Matthew T. Mason and published by MIT Press. This book was released on 2001-06-08 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and engineering of robotic manipulation. "Manipulation" refers to a variety of physical changes made to the world around us. Mechanics of Robotic Manipulation addresses one form of robotic manipulation, moving objects, and the various processes involved—grasping, carrying, pushing, dropping, throwing, and so on. Unlike most books on the subject, it focuses on manipulation rather than manipulators. This attention to processes rather than devices allows a more fundamental approach, leading to results that apply to a broad range of devices, not just robotic arms. The book draws both on classical mechanics and on classical planning, which introduces the element of imperfect information. The book does not propose a specific solution to the problem of manipulation, but rather outlines a path of inquiry.

Download or read book Fundamentals of Mechanics of Robotic Manipulation written by Marco Ceccarelli and published by Springer Nature. This book was released on 2022-03-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explores the fundamental issues of robot mechanics for both the analysis and design of manipulations, manipulators and grippers, taking into account a central role of mechanics and mechanical structures in the development and use of robotic systems with mechatronic design. It examines manipulations that can be performed by robotic manipulators. The contents of the book are kept at a fairly practical level with the aim to teach how to model, simulate, and operate robotic mechanical systems. The chapters have been written and organized in a way that they can be red even separately, so that they can be used separately for different courses and purposes. The introduction illustrates motivations and historical developments of robotic mechanical systems. Chapter 2 describes the analysis and design of manipulations by automatic machinery and robots; chapter 3 deals with the mechanics of serial-chain manipulators with the aim to propose algorithms for analysis, simulation, and design purposes; chapter 4 introduces the mechanics of parallel manipulators; chapter 5 addresses the attention to mechanical grippers and related mechanics of grasping.

Download or read book Collaborative Control Strategies for Robotic Manipulation written by Shane Trimble and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Human Inspired Dexterity in Robotic Manipulation written by Tetsuyou Watanabe and published by Academic Press. This book was released on 2018-06-26 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Inspired Dexterity in Robotic Manipulation provides up-to-date research and information on how to imitate humans and realize robotic manipulation. Approaches from both software and hardware viewpoints are shown, with sections discussing, and highlighting, case studies that demonstrate how human manipulation techniques or skills can be transferred to robotic manipulation. From the hardware viewpoint, the book discusses important human hand structures that are key for robotic hand design and how they should be embedded for dexterous manipulation. This book is ideal for the research communities in robotics, mechatronics and automation. Investigates current research direction in robotic manipulation Shows how human manipulation techniques and skills can be transferred to robotic manipulation Identifies key human hand structures for robotic hand design and how they should be embedded in the robotic hand for dexterous manipulation

Download or read book Cognitive Reasoning for Compliant Robot Manipulation written by Daniel Sebastian Leidner and published by Springer. This book was released on 2018-12-08 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to achieve human-like performance, this book covers the four steps of reasoning a robot must provide in the concept of intelligent physical compliance: to represent, plan, execute, and interpret compliant manipulation tasks. A classification of manipulation tasks is conducted to identify the central research questions of the addressed topic. It is investigated how symbolic task descriptions can be translated into meaningful robot commands.Among others, the developed concept is applied in an actual space robotics mission, in which an astronaut aboard the International Space Station (ISS) commands the humanoid robot Rollin' Justin to maintain a Martian solar panel farm in a mock-up environment

Download or read book Advanced Strategies for Robot Manipulators written by Nicolas Radley and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: An industrial robot is comprised of a robot manipulator, power supply, and controllers. A robot manipulator is constructed using rigid links connected by joints with one fixed end and one free end to perform a given task (e.g., to move a box from one location to the next). The joints to this robotic manipulator are the movable components, which enables relative motion between the adjoining links. There are also two linear joints to this robotic manipulator that ensure non-rotational motion between the links, and three rotary type joints that ensure relative rotational motion between the adjacent links. Industry-specific robots perform several tasks such as picking and placing objects, movement adapted from observing how similar manual tasks are handled by a fully-functioning human arm. Such robotic arms are also known as robotic manipulators. These manipulators were originally used for applications with respect to bio-hazardous or radioactive materials or for use in inaccessible places. In industrial ergonomics a manipulator is a lift assist device used to help workers lift, maneuver and place articles in process that are too heavy, too hot, too large or otherwise too difficult for a single worker to manually handle. As opposed to simply vertical lift assists (cranes, hoists, etc.) manipulators have the ability to reach in to tight spaces and remove work pieces. A good example would be removing large stamped parts from a press and placing them in a rack or similar dunnage. Additionally, manipulator tooling gives the lift assist the ability to pitch, roll, or spin the part for appropriate placement. An example would be removing a part from a press in the horizontal and then pitching it up for vertical placement in a rack or rolling a part over for exposing the back of the part. This book, Advanced Strategies for Robot Manipulators, emphasizes on the advances in the robotic manipulation and takes a closer look at samples of robot manipulators.

Download or read book Understanding and Learning Robotic Manipulation Skills from Humans written by Elena Galbally Herrero and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humans are constantly learning new skills and improving upon their existing abilities. In particular, when it comes to manipulating objects, humans are extremely effective at generalizing to new scenarios and using physical compliance to our advantage. Compliance is key to generating robust behaviors by reducing the need to rely on precise trajectories. Programming robots through predefined trajectories has been highly successful for performing tasks in structured environments, such as assembly lines. However, such an approach is not viable for real-time operations in real-world scenarios. Inspired by humans, we propose to program robots at a higher level of abstraction by using primitives that leverage contact information and compliant strategies. Compliance increases robustness to uncertainty in the environment and primitives provide us with atomic actions that can be reused to avoid coding new tasks from scratch. We have developed a framework that allows us to: (i) collect and segment human data from multiple contact-rich tasks through direct or haptic demonstrations, (ii) analyze this data and extract the human's compliant strategy, and (iii) encode the strategy into robot primitives using task-level controllers. During autonomous task execution, haptic interfaces enable human real-time intervention and additional data collection for recovery from failures. At the core of this framework is the notion of a compliant frame - an origin and three directions in space along and about which we control motion and compliance. The compliant frame is attached to the object being manipulated and together with the desired task parameters defines a primitive. Task parameters include desired forces, moments, positions, and orientations. This task specification provides a physically meaningful, low-dimensional, and robot-independent representation. This thesis presents a novel framework for learning manipulation skills from demonstration data. Leveraging compliant frames enables us to understand human actions and extract strategies that generalize across objects and robots. The framework was extensively validated through simulation and hardware experiments, including five real-world construction tasks.

Download or read book Robot Manipulation of Deformable Objects written by Dominik Henrich and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about automatic handling of non-rigid or deformable objects like cables, fabric, or foam rubber. The automation by robots in industrial environments, is especially examined. It discusses several important automation aspects, such as material modelling and simulation, planning and control strategies, collaborative systems, and industrial applications. This book collects contributions from various countries and international projects and, therefore, provides a representative overview of the state of the art in this field. It is of particular interest for scientists and practitioners in the area of robotics and automation

Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.

Download or read book Aerial Robotic Manipulation written by Anibal Ollero and published by Springer. This book was released on 2019-06-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robotic manipulation integrates concepts and technologies coming from unmanned aerial systems and robotics manipulation. It includes not only kinematic, dynamics, aerodynamics and control but also perception, planning, design aspects, mechatronics and cooperation between several aerial robotics manipulators. All these topics are considered in this book in which the main research and development approaches in aerial robotic manipulation are presented, including the description of relevant systems. In addition of the research aspects, the book also includes the deployment of real systems both indoors and outdoors, which is a relevant characteristic of the book because most results of aerial robotic manipulation have been validated only indoor using motion tracking systems. Moreover, the book presents two relevant applications: structure assembly and inspection and maintenance, which has started to be applied in the industry. The Chapters of the book will present results of two main European Robotics Projects in aerial robotics manipulation: FP7 ARCAS and H2020 AEROARMS. FP7 ARCAS defined the basic concepts on aerial robotic manipulation, including cooperative manipulation. The H2020 AEROARMS on aerial robot with multiple arms and advanced manipulation capabilities for inspection and maintenance has two general objectives: (1) development of advanced aerial robotic manipulation methods and technologies, including manipulation with dual arms and multi-directional thrusters aerial platforms; and (2) application to the inspection and maintenance.

Download or read book Transferring Human Impedance Regulation Skills to Robots written by Arash Ajoudani and published by Springer. This book was released on 2015-11-05 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces novel thinking and techniques to the control of robotic manipulation. In particular, the concept of teleimpedance control as an alternative method to bilateral force-reflecting teleoperation control for robotic manipulation is introduced. In teleimpedance control, a compound reference command is sent to the slave robot including both the desired motion trajectory and impedance profile, which are then realized by the remote controller. This concept forms a basis for the development of the controllers for a robotic arm, a dual-arm setup, a synergy-driven robotic hand, and a compliant exoskeleton for improved interaction performance.

Download or read book Advanced Bimanual Manipulation written by Bruno Siciliano and published by Springer. This book was released on 2012-04-10 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dexterous and autonomous manipulation is a key technology for the personal and service robots of the future. Advances in Bimanual Manipulation edited by Bruno Siciliano provides the robotics community with the most noticeable results of the four-year European project DEXMART (DEXterous and autonomous dual-arm hand robotic manipulation with sMART sensory-motor skills: A bridge from natural to artificial cognition). The volume covers a host of highly important topics in the field, concerned with modelling and learning of human manipulation skills, algorithms for task planning, human-robot interaction, and grasping, as well as hardware design of dexterous anthropomorphic hands. The results described in this five-chapter collection are believed to pave the way towards the development of robotic systems endowed with dexterous and human-aware dual-arm/hand manipulation skills for objects, operating with a high degree of autonomy in unstructured real-world environments.