Download or read book Robotic Grasping and Fine Manipulation written by M. R. Cutkosky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: When a person picks up a metal part and clamps it in the chuck of a lathe, he begins with his arm, proceeds with his wrist and finishes with his fingers. The arm brings the part near the chuck. The wrist positions the part, giving it the proper orientation to slide in. After the part is inserted, the wrist and fingers make tiny corrections to ensure that it is correctly seated. Today's robot attempting the same operations is at a grave disadvantage if it has to make all motions with the arm. The following work investigates the use of robotic wrists and hands to help industrial robots perform the fine motions needed in a metal working cell. Chapters 1 and 2 are an introduction to the field and a review of previous investigations on related subjects. Little work has been done on grasping and fine manipulation with a robot hand or wrist, but the related subjects of robot arm dynamics and control have an extensive literature.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Robotic Grasping and Manipulation written by Yu Sun and published by Springer. This book was released on 2018-07-14 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First Robotic Grasping and Manipulation Challenge, RGMC 2016, held at IROS 2016, Daejeon, South Korea, in October 2016.The 13 revised full papers presented were carefully reviewed and are describing the rules, results, competitor systems and future directions of the inaugural competition. The competition was designed to allow researchers focused on the application of robot systems to compare the performance of hand designs as well as autonomous grasping and manipulation solutions across a common set of tasks. The competition was comprised of three tracks that included hand-in-hand grasping, fully autonomous grasping, and simulation.
Download or read book Proceedings Of 17th All India Manufacturing Technology written by and published by Allied Publishers. This book was released on with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Robotic Grasping and Fixturing written by Caihua Xiong and published by World Scientific. This book was released on 2007 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental knowledge of robotic grasping and fixturing (RGF) manipulation. For RGF manipulation to become a science rather than an art, the content of the book is uniquely designed for a thorough understanding of the RGF from the multifingered robot hand grasp, basic fixture design principle, and evaluating and planning of robotic grasping/fixturing, and focuses on the modeling and applications of the RGF. Compared with existing publications, this volume concentrates more on abstract formulation, i.e. mathematical modeling of robotic grasping and fixturing. Thus, it will be a good reference text for academic researchers, manufacturing and industrial engineers and a textbook for engineering graduate students. The book provides readers an overall picture and scientific basis of RGF, the comprehensive information and mathematic models of developing and applying RGF in industry, and presents long term valuable information which is essential and can be used by technical professions as a good reference. Sample Chapter(s). Chapter 1: Robotic Grasp and Workpiece-Fixture Systems (225 KB). Contents: Robotic Grasp and Workpiece-Fixture Systems; Qualitative Analysis and Quantitative Evaluation of Form-Closure Grasping/Fixturing; Stability Index and Contact Configuration Planning of Force-Closure Grasping/Fixturing; Active Grasp Force Planning; Grasp Capability Analysis; Compliant Grasping with Passive Forces; Kinematics of Contacts and Rolling Manipulation; Dynamic Stability of Grasping/Fixturing; Locating Error Analysis and Configuration Planning of Fixtures; Clamping Planning in Workpiece-Fixture Systems. Readership: Academic researchers, manufacturing and industrial engineers and engineering graduate students.
Download or read book RAMSETE written by Salvatore Nicosia and published by Springer. This book was released on 2003-07-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robotics applications, initially developed for industrial and manufacturing contexts, are now strongly present in several elds. Besides well-known space and high-technology applications, robotics for every day life and medical s- vices is becoming more and more popular. As an example, robotic manipu- tors are particularly useful in surgery and radiation treatments, they could be employed for civil demining, for helping disabled people, and ultimately for domestic tasks, entertainment and education. Such a kind of robotic app- cations require the integration of many di erent skills. Autonomous vehicles and mobile robots in general must be integrated with articulated manipu- tors. Many robotic technologies (sensors, actuators and computing systems) must be properly used with speci c technologies (localisation, planning and control technologies). The task of designing robots for these applications is a hard challenge: a speci c competence in each area is demanded, in the e ort of a truly integrated multidisciplinary design.
Download or read book Multi point Interaction with Real and Virtual Objects written by Federico Barbagli and published by Springer Science & Business Media. This book was released on 2005-07-07 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of robotic and virtual interaction with physical objects has been the subject of research for many years in both the robotic manipulation and haptics communities. Both communities have focused much attention on human touch-based perception and manipulation, modelling contact between real or virtual hands and objects, or mechanism design. However, as a whole, these problems have not yet been addressed from a unified perspective. This edited book is the outcome of a well-attended workshop which brought together leading scholars from various branches of the robotics, virtual-reality, and human studies communities during the 2004 IEEE International Conference on Robotics and Automation. It covers some of the most challenging problems on the forefront of today’s research on physical interaction with real and virtual objects, with special emphasis on modelling contacts between objects, grasp planning algorithms, haptic perception, and advanced design of hands, devices and interfaces.
Download or read book Emerging Trends in Mechatronics written by Aydin Azizi and published by BoD – Books on Demand. This book was released on 2020-01-15 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics is a multidisciplinary branch of engineering combining mechanical, electrical and electronics, control and automation, and computer engineering fields. The main research task of mechatronics is design, control, and optimization of advanced devices, products, and hybrid systems utilizing the concepts found in all these fields. The purpose of this special issue is to help better understand how mechatronics will impact on the practice and research of developing advanced techniques to model, control, and optimize complex systems. The special issue presents recent advances in mechatronics and related technologies. The selected topics give an overview of the state of the art and present new research results and prospects for the future development of the interdisciplinary field of mechatronic systems.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book On the Analysis of Robotic Grasping and Manipulation of Objects Using Solid Modeling written by Keith Robert Victor and published by . This book was released on 1989 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Mechatronics written by Horacio Martinez-Alfaro and published by BoD – Books on Demand. This book was released on 2011-08-29 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerous books have already been published specializing in one of the well known areas that comprise Mechatronics: mechanical engineering, electronic control and systems. The goal of this book is to collect state-of-the-art contributions that discuss recent developments which show a more coherent synergistic integration between the mentioned areas. The book is divided in three sections. The first section, divided into five chapters, deals with Automatic Control and Artificial Intelligence. The second section discusses Robotics and Vision with six chapters, and the third section considers Other Applications and Theory with two chapters.
Download or read book The Visual Neuroscience of Robotic Grasping written by Eris Chinellato and published by Springer. This book was released on 2015-06-19 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents interdisciplinary research that pursues the mutual enrichment of neuroscience and robotics. Building on experimental work, and on the wealth of literature regarding the two cortical pathways of visual processing - the dorsal and ventral streams - we define and implement, computationally and on a real robot, a functional model of the brain areas involved in vision-based grasping actions. Grasping in robotics is largely an unsolved problem, and we show how the bio-inspired approach is successful in dealing with some fundamental issues of the task. Our robotic system can safely perform grasping actions on different unmodeled objects, denoting especially reliable visual and visuomotor skills. The computational model and the robotic experiments help in validating theories on the mechanisms employed by the brain areas more directly involved in grasping actions. This book offers new insights and research hypotheses regarding such mechanisms, especially for what concerns the interaction between the dorsal and ventral streams. Moreover, it helps in establishing a common research framework for neuroscientists and roboticists regarding research on brain functions.
Download or read book Springer Handbook of Robotics written by Bruno Siciliano and published by Springer. This book was released on 2016-07-27 with total page 2259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this handbook provides a state-of-the-art overview on the various aspects in the rapidly developing field of robotics. Reaching for the human frontier, robotics is vigorously engaged in the growing challenges of new emerging domains. Interacting, exploring, and working with humans, the new generation of robots will increasingly touch people and their lives. The credible prospect of practical robots among humans is the result of the scientific endeavour of a half a century of robotic developments that established robotics as a modern scientific discipline. The ongoing vibrant expansion and strong growth of the field during the last decade has fueled this second edition of the Springer Handbook of Robotics. The first edition of the handbook soon became a landmark in robotics publishing and won the American Association of Publishers PROSE Award for Excellence in Physical Sciences & Mathematics as well as the organization’s Award for Engineering & Technology. The second edition of the handbook, edited by two internationally renowned scientists with the support of an outstanding team of seven part editors and more than 200 authors, continues to be an authoritative reference for robotics researchers, newcomers to the field, and scholars from related disciplines. The contents have been restructured to achieve four main objectives: the enlargement of foundational topics for robotics, the enlightenment of design of various types of robotic systems, the extension of the treatment on robots moving in the environment, and the enrichment of advanced robotics applications. Further to an extensive update, fifteen new chapters have been introduced on emerging topics, and a new generation of authors have joined the handbook’s team. A novel addition to the second edition is a comprehensive collection of multimedia references to more than 700 videos, which bring valuable insight into the contents. The videos can be viewed directly augmented into the text with a smartphone or tablet using a unique and specially designed app. Springer Handbook of Robotics Multimedia Extension Portal: http://handbookofrobotics.org/
Download or read book Next Wave in Robotics written by Tzuu-Hseng S. Li and published by Springer. This book was released on 2011-08-25 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 14th RoboWorld Cup and Congress of the Federation of International Robosoccer Association, FIRA 2011, held in Kaohsiung, Taiwan in August 2011. The 34 revised papers presented were carefully reviewed and selected for inclusion in the proceedings out of a total of 110 contributed papers presented at FIRA 2011. The papers address a broad variety of current topics in robotics research, particularly in robot soccer.
Download or read book Theory of Automatic Robot Assembly and Programming written by B.O. Nnaji and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machines will gradually become programmed using computers which have the knowledge of how the objects in the world relate to one another. This book capitalizes on the fact that products which are manufactured can be designed on the computer and that information about the product such as its physical shape provide powerful information to reason about how to develop the process plan for their manufacture. This book explores the whole aspect of using the principles of how parts behave naturally to automatically generate programs that govern how to produce them. The last decade saw tremendous work on how machines can be programmed to perform a variety of tasks automatically. Robotics has witnessed the most work on programming techniques. But it was not until the emergence of the advanced CAD system as a proper source of information representation about objects which are to be manipulated by the robot that it became viable for automated processors to generate robot programs without human interface. It became possible for objects to be described and for principles about how they interact in the world to be developed. The functions which the features designed into the objects serve for the objects can be adequately represented and used in reasoning about the manufacturing of the parts using the robot. This book describes the necessary principles which must be developed for a robot to generate its own programs with the knowledge of the world in the CAD system.
Download or read book Robotics in Meat Fish and Poultry Processing written by K. Khodabandehloo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past decade has seen growing interest in the use of robotic technology in the food sector. There is a strong indication that this sector and, in particular, industries dealing with meat, fish and poultry products, would make even more use of robotics if such technology were better suited to the specific needs of the food production environment. Clearly the poten tial is high. This book aims to provide the reader with the state of robotic technology currently under development. For the first time a series of chapters, written by leading international authors, brings together a range of topics in robotics as applicable to meat, fish and poultry processing. The contents will interest researchers, managers, manufacturing engin eers, consultants and students. Manufacturers and suppliers of robotic technology or food machinery are strongly recommended to examine the content and exploit the potential benefits described. The co-operation and indeed the full active involvement of research establishments, manufac turers and food producers in teams, is essential in order to achieve the maximum use of robotics.
Download or read book Autonomous Robots written by George A. Bekey and published by MIT Press. This book was released on 2005 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the science and practice of autonomous robots that reviews over 300 current systems and examines the underlying technology.
