Download or read book Sensors for Mobile Robots written by H.R. Everett and published by CRC Press. This book was released on 1995-07-15 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author compiles everything a student or experienced developmental engineer needs to know about the supporting technologies associated with the rapidly evolving field of robotics.From the table of contents: Design Considerations * Dead Reckoning * Odometry Sensors * Doppler and Inertial Navigation * Typical Mobility Configurations * Tactile and

Download or read book Active Sensors for Local Planning in Mobile Robotics written by Penelope Probert Smith and published by World Scientific. This book was released on 2001 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes recent work on active sensors for mobile robots. An active sensor interacts with its surroundings to supply data on demand for a particular function, gathering and abstracting information according to need rather than acting as a generic data gatherer. Details of the physical operation are hidden.The book deals mainly with active range sensors, which provide rapid information for local planning, describing extraction of two-dimensional features such as lines, corners and cylinders to reconstruct a plan of a building. It is structured according to the physical principles of the sensors, since to a large extent these determine the function of the sensors and the methods of processing. Recent work using sonar, optoelectronic sensors and radar is described. Sections on vision and on sensor management develop the idea of software adaptation for efficient operation in a changing environment.

Download or read book Robot sensors and transducers written by S Ruocco and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of sensor's with machines, whether to control them continuously or to inspect and verify their operation, can be highly cost-effective in particular areas of industrial automation. Examples of such areas include sensing systems to monitor tool condition, force and torque sensing for robot assembly systems, vision-based automatic inspection, and tracking sensor's for robot arc welding and seam sealing. Many think these will be the basis of an important future industry. So far, design of sensor systems to meet these needs has been (in the interest of cheapness) rather ad hoc and carefully tailored to the application both as to the transducer hardware and the associated processing software. There are now, however, encouraging signs of commonality emerging between different sensor application areas. For instance, many commercial vision systems and some tactile systems just emerging from research are able to use more or less standardized techniques for two-dimensional image processing and shape representation. Structured-light triangulation systems can be applied with relatively minor hardware and software variations to measure three-dimensional profiles of objects as diverse as individual soldered joints, body pressings, and weldments. Sensors make it possible for machines to recover 'sensibly' from errors, and standard software proce dures such as expert systems can now be applied to facilitate this.

Download or read book Elements of Robotics written by Mordechai Ben-Ari and published by Springer. This book was released on 2017-10-25 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book bridges the gap between playing with robots in school and studying robotics at the upper undergraduate and graduate levels to prepare for careers in industry and research. Robotic algorithms are presented formally, but using only mathematics known by high-school and first-year college students, such as calculus, matrices and probability. Concepts and algorithms are explained through detailed diagrams and calculations. Elements of Robotics presents an overview of different types of robots and the components used to build robots, but focuses on robotic algorithms: simple algorithms like odometry and feedback control, as well as algorithms for advanced topics like localization, mapping, image processing, machine learning and swarm robotics. These algorithms are demonstrated in simplified contexts that enable detailed computations to be performed and feasible activities to be posed. Students who study these simplified demonstrations will be well prepared for advanced study of robotics. The algorithms are presented at a relatively abstract level, not tied to any specific robot. Instead a generic robot is defined that uses elements common to most educational robots: differential drive with two motors, proximity sensors and some method of displaying output to the user. The theory is supplemented with over 100 activities, most of which can be successfully implemented using inexpensive educational robots. Activities that require more computation can be programmed on a computer. Archives are available with suggested implementations for the Thymio robot and standalone programs in Python.

Download or read book Computer Vision and Sensor Based Robots written by C.H. Dodd and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal ofthe symposium, "Computer Vision and Sensor-Based Robots," held at the General Motors Research Laboratories on September 2S and 26, 1978, was to stimulate a closer interaction between people working in diverse areas and to discuss fundamental issues related to vision and robotics. This book contains the papers and general discussions of that symposium, the 22nd in an annual series covering different technical disciplines that are timely and of interest to General Motors as well as the technical community at large. The subject of this symposium remains timely because the cost of computer vision hardware continues to drop and there is increasing use of robots in manufacturing applications. Current industrial applications of computer vision range from simple systems that measure or compare to sophisticated systems for part location determination and inspection. Almost all industrial robots today work with known parts in known posi tions, and we are just now beginning to see the emergence of programmable automa tion in which the robot can react to its environment when stimulated by visual and force-touch sensor inputs. As discussed in the symposium, future advances will depend largely on research now underway in several key areas. Development of vision systems that can meet industrial speed and resolution requirements with a sense of depth and color is a necessary step.

Download or read book Sensors and Sensory Systems for Advanced Robots written by Paolo Dario and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the NATO Advanced Research Workshop (ARW) on "Sensors and Sensory Systems for Advanced Robots", which was held in Maratea, Italy, during the week Apri I 28 - May 3, 1986. Participants in the ARW, who came from eleven NATO and two non-NATO countries, represented an i nternat i ona I assortment of d i st i ngu i shed research centers in industry, government and academia. Purpose of the Workshop was to rev i ew the state of the art of sensing for advanced robots, to discuss basic concepts and new ideas on the use of sensors for robot control and to provide recommendations for future research in this area, There IS an almost unanimous consensus among invest i gators in the fie I d of robot i cs that the add i t i on of sensory capabi I ities represents the "natural" evolution of present industrial robots, as wei I as the necessary premise to the development of advanced robots for nonindustrial app I i cat ions. However, a number of conceptua I and techn i ca I problems sti I I challenge the practical implementation and widespread appl ication of sensor-based robot control techn i ques. Cruc i a I among those prob I ems is the ava i lab iii ty of adequate sensors.

Download or read book Robot Sensors written by Alan Pugh and published by . This book was released on 1986 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: V.1 Vision.--v.2. Tactile and non-vision.

Download or read book Sensor Devices and Systems for Robotics written by Alicia Casals and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: As robots improve in efficiency and intelligence, there is a growing need to develop more efficient, accurate and powerful sensors in accordance with the tasks to be robotized. This has led to a great increase in the study and development of different kinds of sensor devices and perception systems over the last ten years. Applications that differ from the industrial ones are often more demanding in sensorics since the environment is not usually so well structured. Spatial and agricultural applications are examples of situations where the environment is unknown or variable. Therefore, the work to be done by a robot cannot be strictly programmed and there must be an interactive communication with the environment. It cannot be denied that evolution and development in robotics are closely related to the advances made in sensorics. The first vision and force sensors utilizing discrete components resulted in a very low resolution and poor accuracy. However, progress in VLSI, imaging devices and other technologies have led to the development of more efficient sensor and perception systems which are able to supply the necessary data to robots.

Download or read book Sensor Based Robots Algorithms and Architectures written by C.S.George Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most industrial robots today have little or no sensory capability. Feedback is limited to information about joint positions, combined with a few interlock and timing signals. These robots can function only in an environment where the objects to be manipulated are precisely located in the proper position for the robot to grasp (i. e. , in a structured environment). For many present industrial applications, this level of performance has been adequate. With the increasing demand for high performance sensor-based robot manipulators in assembly tasks, meeting this demand and challenge can only be achieved through the consideration of: 1) efficient acquisition and processing of intemaVextemal sensory information, 2) utilization and integration of sensory information from various sensors (tactile, force, and vision) to acquire knowledge in a changing environment, 3) exploitation of inherent robotic parallel algorithms and efficient VLSI architectures for robotic computations, and finally 4) system integration into a working and functioning robotic system. This is the intent of the Workshop on Sensor-Based Robots: Algorithms and Architectures - to study the fundamental research issues and problems associated with sensor-based robot manipulators and to propose approaches and solutions from various viewpoints in improving present day robot manipula tors in the areas of sensor fusion and integration, sensory information processing, and parallel algorithms and architectures for robotic computations.

Download or read book Sensors written by Jose Gerardo Rocha and published by BoD – Books on Demand. This book was released on 2008-12-01 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes some devices that are commonly identified as tactile or force sensors. This is achieved with different degrees of detail, in a unique and actual resource, through the description of different approaches to this type of sensors. Understanding the design and the working principles of the sensors described here requires a multidisciplinary background of electrical engineering, mechanical engineering, physics, biology, etc. An attempt has been made to place side by side the most pertinent information in order to reach a more productive reading not only for professionals dedicated to the design of tactile sensors, but also for all other sensor users, as for example, in the field of robotics. The latest technologies presented in this book are more focused on information readout and processing: as new materials, micro and sub-micro sensors are available, wireless transmission and processing of the sensorial information, as well as some innovative methodologies for obtaining and interpreting tactile information are also strongly evolving.

Download or read book Electronic Nose Technologies and Advances in Machine Olfaction written by Albastaki, Yousif and published by IGI Global. This book was released on 2018-04-13 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design and study of materials is a pivotal component to new discoveries in the various fields of science and technology. By better understanding the components and structures of materials, researchers can increase its applications across different industries. Electronic Nose Technologies and Advances in Machine Olfaction is an academic scholarly resource that examines the emerging applications of odor-sensing devices as well as a better understanding of the designing process with the aid of neural networks and various other technologies. Featuring coverage on a broad range of topics including food spoilage detection, chemical sensing, and olfactometer, this book is a vital resource for engineers, academicians, researchers, students, and practitioners seeking current research on the advancements in applications of odor-sensing devices.

Download or read book Visual Sensing and its Applications written by Zhongxue Gan and published by Springer Science & Business Media. This book was released on 2011-12-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Visual Sensing and its Applications: Integration of Laser Sensors to Industrial Robots” provides comprehensive and up-to-date coverage of research and development on this robotic vision system. A laser-structured light is the main concern in discussions of visual sensing. Also addressed in this book are all components of the robotic vision system and an emphasis on how to increase the accuracy of the system using three levels of calibration. This includes calibration of the vision system (eye calibration), calibration of eye-to-hand configuration and calibration of robot kinematics (hand calibration). With the integration of the laser sensors to industrial robots numerous applications in the field of robotic welding, grinding, machining, inspection, and palletizing are illustrated based on practical engineering projects in order to demonstrate how the visual sensing is performed. The book will serve as a valuable resource for researchers and engineers in the areas of robotics and machine vision. Dr. Zhongxue Gan is a vice chairman and chief scientist of the ENN Group, China. He serves as a member of the National Energy Expert Consultation Committee of China and member of the National Coal Council of the USA. He is also a co-founder of Intersmart Robotic Systems Co. Ltd., China. He was a research fellow in flexible automation systems at ABB and a founding director of ABB Corporate Research Robot Laboratories, both in the USA and in China. Dr. Qing Tang is a co-founder and CEO of Intersmart Robotic Systems Co. Ltd., China and an adjunct professor in Physics at Sichuan University, China. He was a principle consulting engineer and project manager at the ABB Corporate Research Robot Laboratory in the USA.

Download or read book Mechatronic Hands written by Paul H. Chappell and published by IET. This book was released on 2016-06-06 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the technical design characteristics of the main components that go into forming an artificial hand, whether it is a simple design that does not have a natural appearance, or a more complicated design where there are multiple movements of the fingers and thumb. Mechanical components obviously form the structure of any hand, while there are some lesser known ideas that need to be explored such as how to process a slip signal.

Download or read book Robotics written by Tadej Bajd and published by Springer Science & Business Media. This book was released on 2010-01-15 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This supplementary introductory text for courses in robotics or industrial robotics requires minimal knowledge of physics and mathematics. It treats many fundamental subjects in robotics and includes a glossary in English, French and German.

Download or read book Traditional and Non Traditional Robotic Sensors written by Thomas C. Henderson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the written record of the NATO Advanced Research Workshop on Traditional and Non-Traditional Robotic Sensors held in the Hotel Villa del Mare, Maratea, Italy, August 28 - September 1, 1989. This workshop was organized under the auspicies of the NATO Special Program on Sensory Systems for Robotic Control. Professor Frans Groen from the University of Amsterdam and Dr. Gert Hirzinger from the German Aerospace Research Establishment (DLR) served as members of the organizing committee for this workshop. Research in the area of robotic sensors is necessary in order to support a wide range of applications, including: industrial automation, space robotics, image analysis, microelectronics, and intelligent sensors. This workshop focused on the role of traditional and non-traditional sensors in robotics. In particular, the following three topics were explored: - Sensor development and technology, - Multisensor integration techniques, - Application area requirements which motivate sensor development directions. This workshop'brought together experts from NATO countries to discuss recent developments in these three areas. Many new directions (or new directions on old problems) were proposed. Existing sensors should be pushed into new application domains such as medical robotics and space robotics.

Download or read book Sensor Based Intelligent Robots written by Henrik I Christensen and published by Springer. This book was released on 2007-01-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thorougly refereed post-proceedings of an international workshop on sensor based Intelligent Robot held in Dagstuhl Castle, Germany in September/October 1998. The 17 revised full papers presented were carefully reviewed for inclusion in the book. Among the topics addressed are robot navigation, motion planning, autonomous mobile robots, wheelchair robots, interactive robots, car navigation systems, visual tracking, sensor based navigation, distributed algorithms, computer vision, intelligent agents, robot control, and computational geometry.

Download or read book Space Robotics and Autonomous Systems written by Yang Gao and published by IET. This book was released on 2021-08-24 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book covers space robotics and autonomous systems (space RAS) from technologies to advances and applications including sensing and perception, mobility, manipulations, high-level autonomy, human-robot interaction, multi-modal interaction, modelling and simulation, and safety and trust.