Download or read book Robot Arm Assembly and Programming Guide written by E. T. Bryant and published by . This book was released on 2019-05-24 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third in a series of textbooks on Robotics.This book explains how to assemble a robot arm kit. It gives detailed instruction on assembly and programming the unit.Helpful tips and special notes will allow you to complete the project successfully.A must have for the DIY hobbyist and experimenter.High quality photos.

Download or read book Robot Programming written by Cameron Hughes and published by Que Publishing. This book was released on 2016-05-02 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Start programming robots NOW! Learn hands-on, through easy examples, visuals, and code This is a unique introduction to programming robots to execute tasks autonomously. Drawing on years of experience in artificial intelligence and robot programming, Cameron and Tracey Hughes introduce the reader to basic concepts of programming robots to execute tasks without the use of remote controls. Robot Programming: A Guide to Controlling Autonomous Robots takes the reader on an adventure through the eyes of Midamba, a lad who has been stranded on a desert island and must find a way to program robots to help him escape. In this guide, you are presented with practical approaches and techniques to program robot sensors, motors, and translate your ideas into tasks a robot can execute autonomously. These techniques can be used on today’s leading robot microcontrollers (ARM9 and ARM7) and robot platforms (including the wildly popular low-cost Arduino platforms, LEGO® Mindstorms EV3, NXT, and Wowee RS Media Robot) for your hardware/Maker/DIY projects. Along the way the reader will learn how to: Program robot sensors and motors Program a robot arm to perform a task Describe the robot’s tasks and environments in a way that a robot can process using robot S.T.O.R.I.E.S. Develop a R.S.V.P. (Robot Scenario Visual Planning) used for designing the robot’s tasks in an environment Program a robot to deal with the “unexpected” using robot S.P.A.C.E.S. Program robots safely using S.A.R.A.A. (Safe Autonomous Robot Application Architecture) Approach Program robots using Arduino C/C++ and Java languages Use robot programming techniques with LEGO® Mindstorms EV3, Arduino, and other ARM7 and ARM9-based robots.

Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.

Download or read book Handbook of Industrial Robotics written by Shimon Y. Nof and published by John Wiley & Sons. This book was released on 1999-03-02 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrieroboter gehoren heute zum Alltag. In den letzten zehn Jahren verlagerte sich der Schwerpunkt der Neuentwicklungen weg von den Robotern selbst, hin zu alternativen Formen der kunstlichen Intelligenz, mit denen die Gerate ausgestattet werden. Dem Rechnung tragend, beschaftigt sich die zweite Auflage dieses Handbuchs vor allem mit Anwendungen und Strategien zur Problemlosung in der Industrie. Angesprochen werden Themen wie Graphiksimulatoren, objektorientierte Software, Kommunikationssysteme und Mikro- und Nanoroboter. (04/99)

Download or read book ROS Robotics By Example written by Carol Fairchild and published by Packt Publishing Ltd. This book was released on 2016-06-30 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bring life to your robot using ROS robotic applications About This Book This book will help you boost your knowledge of ROS and give you advanced practical experience you can apply to your ROS robot platforms This is the only book that offers you step-by-step instructions to solidify your ROS understanding and gain experience using ROS tools From eminent authors, this book offers you a plethora of fun-filled examples to make your own quadcopter, turtlebot, and two-armed robots Who This Book Is For If you are a robotics developer, whether a hobbyist, researchers or professional, and are interested in learning about ROS through a hands-on approach, then this book is for you. You are encouraged to have a working knowledge of GNU/Linux systems and Python. What You Will Learn Get to know the fundamentals of ROS and apply its concepts to real robot examples Control a mobile robot to navigate autonomously in an environment Model your robot designs using URDF and Xacro, and operate them in a ROS Gazebo simulation Control a 7 degree-of-freedom robot arm for visual servoing Fly a quadcopter to autonomous waypoints Gain working knowledge of ROS tools such as Gazebo, rviz, rqt, and Move-It Control robots with mobile devices and controller boards In Detail The visionaries who created ROS developed a framework for robotics centered on the commonality of robotic systems and exploited this commonality in ROS to expedite the development of future robotic systems. From the fundamental concepts to advanced practical experience, this book will provide you with an incremental knowledge of the ROS framework, the backbone of the robotics evolution. ROS standardizes many layers of robotics functionality from low-level device drivers to process control to message passing to software package management. This book provides step-by-step examples of mobile, armed, and flying robots, describing the ROS implementation as the basic model for other robots of these types. By controlling these robots, whether in simulation or in reality, you will use ROS to drive, move, and fly robots using ROS control. Style and approach This is an easy-to-follow guide with hands-on examples of ROS robots, both real and in simulation.

Download or read book The LEGO MINDSTORMS EV3 Discovery Book written by Laurens Valk and published by No Starch Press. This book was released on 2014-06-14 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: LEGO MINDSTORMS has changed the way we think about robotics by making it possible for anyone to build real, working robots. The latest MINDSTORMS set, EV3, is more powerful than ever, and The LEGO MINDSTORMS EV3 Discovery Book is the complete, beginner-friendly guide you need to get started. Begin with the basics as you build and program a simple robot to experiment with motors, sensors, and EV3 programming. Then you’ll move on to a series of increasingly sophisticated robots that will show you how to work with advanced programming techniques like data wires, variables, and custom-made programming blocks. You’ll also learn essential building techniques like how to use beams, gears, and connector blocks effectively in your own designs. Master the possibilities of the EV3 set as you build and program: –The EXPLOR3R, a wheeled vehicle that uses sensors to navigate around a room and follow lines –The FORMULA EV3 RACE CAR, a streamlined remote-controlled race car –ANTY, a six-legged walking creature that adapts its behavior to its surroundings –SK3TCHBOT, a robot that lets you play games on the EV3 screen –The SNATCH3R, a robotic arm that can autonomously find, grab, lift, and move the infrared beacon –LAVA R3X, a humanoid robot that walks and talks More than 150 building and programming challenges throughout encourage you to think creatively and apply what you’ve learned to invent your own robots. With The LEGO MINDSTORMS EV3 Discovery Book as your guide, you’ll be building your own out-of-this-world creations in no time! Requirements: One LEGO MINDSTORMS EV3 set (LEGO SET #31313)

Download or read book The LEGO MINDSTORMS NXT 2 0 Discovery Book written by Laurens Valk and published by No Starch Press. This book was released on 2010-04-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover the many features of the LEGO® MINDSTORMS® NXT 2.0 set. The LEGO MINDSTORMS NXT 2.0 Discovery Book is the complete, illustrated, beginner's guide to MINDSTORMS that you've been looking for. The crystal clear instructions in the Discovery Book will show you how to harness the capabilities of the NXT 2.0 set to build and program your own robots. Author and robotics instructor Laurens Valk walks you through the set, showing you how to use its various pieces, and how to use the NXT software to program robots. Interactive tutorials make it easy for you to reach an advanced level of programming as you learn to build robots that move, monitor sensors, and use advanced programming techniques like data wires and variables. You'll build eight increasingly sophisticated robots like the Strider (a six-legged walking creature), the CCC (a climbing vehicle), the Hybrid Brick Sorter (a robot that sorts by color and size), and the Snatcher (an autonomous robotic arm). Numerous building and programming challenges throughout encourage you to think creatively and to apply what you've learned as you develop the skills essential to creating your own robots. Requirements: One LEGO MINDSTORMS NXT 2.0 set (#8547) Features: –A complete introduction to LEGO MINDSTORMS NXT 2.0 –Building and programming instructions for eight innovative robots –50 sample programs and 72 programming challenges (ranging from easy to hard) encourage you to explore newly learned programming techniques –15 building challenges expand on the robot designs and help you develop ideas for new robots Who is this book for?This is a perfect introduction for those new to building and programming with the LEGO MINDSTORMS NXT 2.0 set. The book also includes intriguing robot designs and useful programming tips for more seasoned MINDSTORMS builders.

Download or read book Study Guide to Accompany Computers Data and Processing written by Harvey M. Deitel and published by Academic Press. This book was released on 2014-05-10 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study Guide to Accompany Computer and Data Processing provides information pertinent to the fundamental aspects of computers and computer technology. This book presents the key benefits of using computers. Organized into five parts encompassing 19 chapters, this book begins with an overview of the evolution of modern computing systems from the earliest mechanical calculating devices to microchips. This text then introduces computer hardware and describes the processor. Other chapters describe how microprocessors are made and describe the physical operation of computers. This book discusses as well how computers present their outputs and explains the storage and retrieval of massive amounts of computer-accessible information from secondary storage devices. The final chapter discusses the use of computers in the transportation systems and the ways in which they make possible other innovations in transportation. This book is a valuable resource for computer scientists, systems analysts, computer programmers, mathematicians, historians, computer specialists, and students.

Download or read book OSHA Technical Manual written by Occupational Safety and Health Administration, Staff and published by Government Institutes. This book was released on 1999-08-01 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used by the OSH Administration's compliance officers as a reference for technical information on safety and health issues, this manual enables both business and industry to evaluate their own facilities for compliance with the Occupational Safety and Health Act. The manual features all compliance and regulatory revisions issued by the Occupational Safety and Health Administration, effective January 20, 1999, and covers such topics as sampling and measurement methods, health hazards, construction operations, health care facilities, ergonomics, and personal protective equipment.

Download or read book Robotics and Automation Handbook written by Thomas R. Kurfess and published by CRC Press. This book was released on 2018-10-03 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the capability and utility of robots has increased dramatically with new technology, robotic systems can perform tasks that are physically dangerous for humans, repetitive in nature, or require increased accuracy, precision, and sterile conditions to radically minimize human error. The Robotics and Automation Handbook addresses the major aspects of designing, fabricating, and enabling robotic systems and their various applications. It presents kinetic and dynamic methods for analyzing robotic systems, considering factors such as force and torque. From these analyses, the book develops several controls approaches, including servo actuation, hybrid control, and trajectory planning. Design aspects include determining specifications for a robot, determining its configuration, and utilizing sensors and actuators. The featured applications focus on how the specific difficulties are overcome in the development of the robotic system. With the ability to increase human safety and precision in applications ranging from handling hazardous materials and exploring extreme environments to manufacturing and medicine, the uses for robots are growing steadily. The Robotics and Automation Handbook provides a solid foundation for engineers and scientists interested in designing, fabricating, or utilizing robotic systems.

Download or read book Raspberry Pi Assembly Language Programming written by Stephen Smith and published by Apress. This book was released on 2019-10-23 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain all the skills required to dive into the fundamentals of the Raspberry Pi hardware architecture and how data is stored in the Pi’s memory. This book provides you with working starting points for your own projects while you develop a working knowledge of Assembly language programming on the Raspberry Pi. You'll learn how to interface to the Pi’s hardware including accessing the GPIO ports. The book will cover the basics of code optimization as well as how to inter-operate with C and Python code, so you'll develop enough background to use the official ARM reference documentation for further projects. With Raspberry Pi Assembly Language Programming as your guide you'll study how to read and reverse engineer machine code and then then apply those new skills to study code examples and take control of your Pi’s hardware and software both. What You'll Learn Program basic ARM 32-Bit Assembly Language Interface with the various hardware devices on the Raspberry Pi Comprehend code containing Assembly language Use the official ARM reference documentation Who This Book Is For Coders who have already learned to program in a higher-level language like Python, Java, C#, or C and now wish to learn Assembly programming.

Download or read book Theory of Robot Control written by Carlos Canudas de Wit and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the latest research results in the theory of robot control, structured so as to echo the gradual development of robot control over the last fifteen years. In three major parts, the editors deal with the modelling and control of rigid and flexible robot manipulators and mobile robots. Most of the results on rigid robot manipulators in part I are now well established, while for flexible manipulators in part II, some problems still remain unresolved. Part III deals with the control of mobile robots, a challenging area for future research. The whole is rounded off with an appendix reviewing basic definitions and the mathematical background for control theory. The particular combination of topics makes this an invaluable source of information for both graduate students and researchers.

Download or read book Dynamics and Robust Control of Robot Environment Interaction written by Miomir Vukobratovic and published by World Scientific. This book was released on 2009 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most attractive problem in robot control, dealing with the direct interaction between a robot and a dynamic environment, including the human-robot physical interaction. It provides comprehensive theoretical and experimental coverage of interaction control problems, starting from the mathematical modeling of robots interacting with complex dynamic environments, and proceeding to various concepts for interaction control design and implementation algorithms at different control layers. Focusing on the learning principle, it also shows the application of new and advanced learning algorithms for robotic contact tasks.

Download or read book OSHA Technical Manual written by United States. Occupational Safety and Health Administration. Office of Science and Technology Assessment and published by . This book was released on 1995 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robot Programming by Demonstration written by Sylvain Calinon and published by EPFL Press. This book was released on 2009-08-24 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in RbD have identified a number of key issues for ensuring a generic approach to the transfer of skills across various agents and contexts. This book focuses on the two generic questions of what to imitate and how to imitate and proposes active teaching methods.

Download or read book Robot Force Control written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the fundamental requirements for the success of a robot task is the capability to handle interaction between manipulator and environment. The quantity that describes the state of interaction more effectively is the contact force at the manipulator's end effector. High values of contact force are generally undesirable since they may stress both the manipulator and the manipulated object; hence the need to seek for effective force control strategies. The book provides a theoretical and experimental treatment of robot interaction control. In the framework of model-based operational space control, stiffness control and impedance control are presented as the basic strategies for indirect force control; a key feature is the coverage of six-degree-of-freedom interaction tasks and manipulator kinematic redundancy. Then, direct force control strategies are presented which are obtained from motion control schemes suitably modified by the closure of an outer force regulation feedback loop. Finally, advanced force and position control strategies are presented which include passivity-based, adaptive and output feedback control schemes. Remarkably, all control schemes are experimentally tested on a setup consisting of a seven-joint industrial robot with open control architecture and force/torque sensor. The topic of robot force control is not treated in depth in robotics textbooks, in spite of its crucial importance for practical manipulation tasks. In the few books addressing this topic, the material is often limited to single-degree-of-freedom tasks. On the other hand, several results are available in the robotics literature but no dedicated monograph exists. The book is thus aimed at filling this gap by providing a theoretical and experimental treatment of robot force control.

Download or read book Arduino Robotics written by John-David Warren and published by Apress. This book was released on 2011-10-08 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will show you how to use your Arduino to control a variety of different robots, while providing step-by-step instructions on the entire robot building process. You'll learn Arduino basics as well as the characteristics of different types of motors used in robotics. You also discover controller methods and failsafe methods, and learn how to apply them to your project. The book starts with basic robots and moves into more complex projects, including a GPS-enabled robot, a robotic lawn mower, a fighting bot, and even a DIY Segway-clone. Introduction to the Arduino and other components needed for robotics Learn how to build motor controllers Build bots from simple line-following and bump-sensor bots to more complex robots that can mow your lawn, do battle, or even take you for a ride Please note: the print version of this title is black & white; the eBook is full color.