Download or read book Risk Management for Engineering Projects written by Nolberto Munier and published by Springer Science & Business. This book was released on 2014-04-29 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the entire process of risk management by providing methodologies for determining the sources of engineering project risk, and once threats have been identified, managing them through: identification and assessment (probability, relative importance, variables, risk breakdown structure, etc.); implementation of measures for their prevention, reduction or mitigation; evaluation of impacts and quantification of risks and establishment of control measures. It also considers sensitivity analysis to determine the influence of uncertain parameters values on different project results, such as completion time, total costs, etc. Case studies and examples across a wide spectrum of engineering projects discuss such diverse factors as: safety; environmental impacts; societal reactions; time and cost overruns; quality control; legal issues; financial considerations; and political risk, making this suitable for undergraduates and graduates in grasping the fundamentals of risk management.

Download or read book Risk Management in Engineering and Construction written by Stephen Ogunlana and published by Routledge. This book was released on 2019-09-09 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s businesses are driven by customer ‘pull’ and technological ‘push’. To remain competitive in this dynamic business world, engineering and construction organizations are constantly innovating with new technology tools and techniques to improve process performance in their projects. Their management challenge is to save time, reduce cost and increase quality and operational efficiency. Risk management has recently evolved as an effective method of managing both projects and operations. Risk is inherent in any project, as managers need to plan projects with minimal knowledge and information, but its management helps managers to become proactive rather than reactive. Hence, it not only increases the chance of project achievement, but also helps ensure better performance throughout its operations phase. Various qualitative and quantitative tools are researched extensively by academics and routinely deployed by practitioners for managing risk. These have tremendous potential for wider applications. Yet the current literature on both the theory and practice of risk management is widely scattered. Most of the books emphasize risk management theory but lack practical demonstrations and give little guidance on the application of those theories. This book showcases a number of effective applications of risk management tools and techniques across product and service life in a way useful for practitioners, graduate students and researchers. It also provides an in-depth understanding of the principles of risk management in engineering and construction.

Download or read book Data Analytics for Engineering and Construction Project Risk Management written by Ivan Damnjanovic and published by Springer. This book was released on 2019-05-23 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a step-by-step guidance on how to implement analytical methods in project risk management. The text focuses on engineering design and construction projects and as such is suitable for graduate students in engineering, construction, or project management, as well as practitioners aiming to develop, improve, and/or simplify corporate project management processes. The book places emphasis on building data-driven models for additive-incremental risks, where data can be collected on project sites, assembled from queries of corporate databases, and/or generated using procedures for eliciting experts’ judgments. While the presented models are mathematically inspired, they are nothing beyond what an engineering graduate is expected to know: some algebra, a little calculus, a little statistics, and, especially, undergraduate-level understanding of the probability theory. The book is organized in three parts and fourteen chapters. In Part I the authors provide the general introduction to risk and uncertainty analysis applied to engineering construction projects. The basic formulations and the methods for risk assessment used during project planning phase are discussed in Part II, while in Part III the authors present the methods for monitoring and (re)assessment of risks during project execution.

Download or read book Risk Management for Design and Construction written by Ovidiu Cretu and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential risk assessment guide for civil engineering, design, and construction Risk management allows construction professionals to identify the risks inherent in all projects, and to provide the tools for evaluating the probabilities and impacts to minimize the risk potential. This book introduces risk as a central pillar of project management and shows how a project manager can be prepared for dealing with uncertainty. Written by experts in the field, Risk Management for Design and Construction uses clear, straightforward terminology to demystify the concepts of project uncertainty and risk. Highlights include: Integrated cost and schedule risk analysis An introduction to a ready-to-use system of analyzing a project's risks and tools to proactively manage risks A methodology that was developed and used by the Washington State Department of Transportation Case studies and examples on the proper application of principles Information about combining value analysis with risk analysis "This book is a must for professionals who are seeking to move towards a proactive risk-centric management style. It is a valuable resource for students who are discovering the intricacies of uncertainties and risks within value estimation. For professionals, the book advocates for identifying and analyzing 'only' risks whose impact are of consequence to a project's performance." JOHN MILTON, PHD, PE Director of Enterprise Risk Management, Washington State Department of Transportation

Download or read book Managing Risk in Construction Projects written by Nigel J. Smith and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investment in any new project invariably carries risk but the construction industry is subject to more risk and uncertainty than perhaps any other industry. This guide for construction managers, project managers and quantity surveyors as well as for students shows how the risk management process improves decision-making. Managing Risk in Construction Projects offers practical guidance on identifying, assessing and managing risk and provides a sound basis for effective decision-making in conditions of uncertainty. The book focuses on theoretical aspects of risk management but also clarifies procedures for undertaking and utilising decisions. This blend of theory and practice is the real message of the book and, with a strong authorship team of practitioners and leading academics, the book provides an authoritative guide for practitioners having to manage real projects. It discusses a number of general concepts, including projects, project phases, and risk attitude before introducing various risk management techniques. This third edition has been extended to recognize the reality of multi-project or programme management and the risks in this context; to highlight the particular problems of risk in international joint ventures; and to provide more coverage of PFI and PPP. With case studies and examples of good practice, the book offers the distilled knowledge of over 100 man-years of experience in working on all aspects of project risk, giving sound practical guidance on identifying, assessing and managing risk.

Download or read book Engineering Construction Risks written by Peter Allan Thompson and published by Thomas Telford. This book was released on 1992 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk analysis and management - an overview. When to apply risk management. Quantitative techniques for project risk analysis. Risk in estimating. Contract stategy...

Download or read book Risk Management in Projects written by Martin Loosemore and published by Taylor & Francis. This book was released on 2012-09-10 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project managers in construction and civil engineering need to base their decisions on realistic information about risk and public perceptions of risk. This second edition of the original practical and straightforward text retains the easy-to-read format, but has been expanded to encompass the entire risk management process and to give a fuller presentation of how risk is generally perceived. Two new chapters cover risk identification and risk response, and the chapters on risk analysis have been completely reorganized. There is also greater emphasis on the theory behind the principles, and an expanded bibliography is given to guide an exploration of the subject in greater detail. The book demystifies risk management by presenting the subject in simple and practical terms, free of technical jargon, and case studies are used extensively to enliven the text and to illustrate the concepts discussed.

Download or read book Construction Risk Management Decision Making written by Alex C. Arthur and published by John Wiley & Sons. This book was released on 2021-12-13 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONSTRUCTION RISK MANAGEMENT DECISION MAKING Explores the relevance of systems thinking and behavioral science in construction risk management Effective risk management is a vital component of all successful construction projects. Although quantitative tools for evaluating data and minimizing risk are readily available, construction managers commonly adopt a more innate, experience-based approach. In Construction Risk Management Decision Making, project manager and senior consultant Alex C. Arthur provides step-by-step advice on assessing and prioritizing risk using qualitative decision-making systems in the construction industry. Incorporating key theories and concepts from systems thinking and behavioral science, this highly practical guide focuses on the behavior patterns of real people in the industry, rather than complex quantitative techniques and data. Concise, easy-to-understand chapters highlight the current practices of construction risk management while helping readers view risk and decision making from a broader perspective. Throughout the book, the author presents invaluable insights into the ways construction professionals think and behave in the real world. Addresses the actual risk management practices of construction professionals Applies human behavioral theories to the study of construction risk management decision making Illustrates the highly intuitive approaches prevalent in various construction projects Features real-life case studies and practical examples throughout Construction Risk Management Decision Making is an excellent textbook for advanced students in project management, engineering, construction, and surveying courses, and a must-have guide for practitioners of construction management, surveying, and architecture.

Download or read book Continuous Risk Management Guidebook written by SOFTWARE ENGINEERING INSTITUTE AUTOR and published by . This book was released on 1996 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Strategic Management of Large Engineering Projects written by Roger Miller and published by MIT Press. This book was released on 2001-03-12 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is based on an international research project that analyzed sixty LEPs, among them the Boston Harbor cleanup; the first phase of subway construction in Ankara, Turkey; a hydro dam on the Caroni River in Venezuela; and the construction of offshore oil platforms west of Flor, Norway. As the number, complexity, and scope of large engineering projects (LEPs) increase worldwide, the huge stakes may endanger the survival of corporations and threaten the stability of countries that approach these projects unprepared. According to the authors, the "front-end" engineering of institutional arrangements and strategic systems is a far greater determinant of an LEP's success than are the more tangible aspects of project engineering and management. The book is based on an international research project that analyzed sixty LEPs, among them the Boston Harbor cleanup; the first phase of subway construction in Ankara, Turkey; a hydro dam on the Caroni River in Venezuela; and the construction of offshore oil platforms west of Flor, Norway. The authors use the research results to develop an experience-based theoretical framework that will allow managers to understand and respond to the complexity and uncertainty inherent in all LEPs. In addition to managers and scholars of large-scale projects, the book will be of interest to those studying the relationship between institutions and strategy, risk management, and corporate governance in general. Contributors Bjorn Andersen, Richard Brealey, Ian Cooper, Serghei Floricel, Michel Habib, Brian Hobbs, Donald R. Lessard, Pascale Michaud, Roger Miller, Xavier Olleros

Download or read book Managing Risk in Projects written by Dr David Hillson and published by Gower Publishing, Ltd.. This book was released on 2012-09-28 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Projects are risky undertakings, and modern approaches to managing projects recognise the central need to manage the risk as an integral part of the project management discipline. Managing Risk in Projects places risk management in its proper context in the world of project management and beyond, and emphasises the central concepts that are essential in order to understand why and how risk management should be implemented on all projects of all types and sizes, in all industries and in all countries. The generic approach detailed by David Hillson is consistent with current international best practice and guidelines (including 'A Guide to the Project Management Body of Knowledge' (PMBoK) and the 'Project Risk Management Practice Standard' from PMI, the 'APM Body of Knowledge' and 'Project Risk Analysis & Management (PRAM) Guide' from APM, 'Management of Risk: Guidance for Practitioners' from OGC, and the forthcoming risk standard from ISO) but David also introduces key developments in the risk management field, ensuring readers are aware of recent thinking, focusing on their relevance to practical application. Throughout, the goal is to offer a concise description of current best practice in project risk management whilst introducing the latest relevant developments, to enable project managers, project sponsors and others responsible for managing risk in projects to do just that - effectively.

Download or read book Natural Risk Management and Engineering written by Milan Gocić and published by Springer Nature. This book was released on 2020-03-12 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the research being pursued as part of the Erasmus+ CBHE KA2 project entitled "Development of master curricula for natural disasters risk management in Western Balkan countries” (NatRisk), which aims to educate experts on the prevention and management of natural disasters in the Western Balkan region in line with national and EU policies. The project has successfully developed and implemented master curricula and educational training in the field of natural disasters risk management, and a methodology for the identification and prevention of natural disasters. Consisting of 11 chapters, the book analyzes and discusses topics such as risk assessment tools and quality methods, the different approaches for civil-military collaboration, natural disasters risk management in Bosnia and Herzegovina, leadership models for managing crises resulting from natural disasters, natural disasters in industrial areas, natural risk management in geotechnics, flood risk modeling, adaptive neuro-fuzzy inference models for flood prediction, collapse prediction of masonry arches, an algorithm for fire truck dispatch in emergency situations, and processing drought data in a GIS environment.

Download or read book Practical Risk Management for EPC Design Build Projects written by Walter A. Salmon and published by John Wiley & Sons. This book was released on 2020-02-25 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the books on construction risk management concentrate on theoretical approaches to the accurate assessment of the overall risks of taking on a new project. Less attention is paid to the typical risks to which the operational level of a project is exposed and how operational managers should approach those risks during project implementation. This book identifies precisely where the major EPC/Design-Build risks occur within an operational framework and shows how best to deal with those risks. The book attempts to offer practical advice, approaches and tools for dealing with risks to which the various operational departments are exposed.

Download or read book Understanding and Managing Risks in Large Engineering Projects written by Donald R Lessard and published by Legare Street Press. This book was released on 2023-07-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the challenges of managing risk in large-scale engineering projects such as infrastructure development, aerospace systems, and defense programs. It provides a framework for identifying, assessing, and managing risks, and includes case studies and practical guidance for project managers and executives. This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book The Owner s Role in Project Risk Management written by National Research Council and published by National Academies Press. This book was released on 2005-02-25 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective risk management is essential for the success of large projects built and operated by the Department of Energy (DOE), particularly for the one-of-a-kind projects that characterize much of its mission. To enhance DOE's risk management efforts, the department asked the NRC to prepare a summary of the most effective practices used by leading owner organizations. The study's primary objective was to provide DOE project managers with a basic understanding of both the project owner's risk management role and effective oversight of those risk management activities delegated to contractors.

Download or read book Identifying and Managing Project Risk written by Tom Kendrick and published by AMACOM. This book was released on 2009-02-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the Project Management Institute’s David I. Cleland Project Management Literature Award 2010 It’s no wonder that project managers spend so much time focusing their attention on risk identification. Important projects tend to be time constrained, pose huge technical challenges, and suffer from a lack of adequate resources. Identifying and Managing Project Risk, now updated and consistent with the very latest Project Management Body of Knowledge (PMBOK)® Guide, takes readers through every phase of a project, showing them how to consider the possible risks involved at every point in the process. Drawing on real-world situations and hundreds of examples, the book outlines proven methods, demonstrating key ideas for project risk planning and showing how to use high-level risk assessment tools. Analyzing aspects such as available resources, project scope, and scheduling, this new edition also explores the growing area of Enterprise Risk Management. Comprehensive and completely up-to-date, this book helps readers determine risk factors thoroughly and decisively...before a project gets derailed.

Download or read book Quantitative Risk Management and Decision Making in Construction written by Amarjit Singh and published by ASCE Press. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Singh introduces valuable techniques for weighing and evaluating alternatives in decision making with a focus on risk analysis for identifying, quantifying, and mitigating risks associated with construction projects.