Download or read book Risk Importance Measures in the Design and Operation of Nuclear Power Plants written by Ivan Vrbanic and published by . This book was released on 2017 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: In using risk-informed approaches for ensuring safety of operating nuclear power plants (NPPs), risk importance measures obtained from probabilistic risk assessments (PRAs) of the plants are integral elements of consideration in many cases. Obtaining these measures in appropriate forms is helpful for decision makers and can facilitate the use of risk information.
Download or read book Basic Safety Principles for Nuclear Power Plants written by International Nuclear Safety Advisory Group and published by . This book was released on 1999 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present report is a revision of Safety Series No. 75-INSAG-3 (1988), updating the statements made on the objectives and principles of safe design and operation for electricity generating nuclear power plants. It includes the improvements made in the safety of operating nuclear power plants and identifies the principles underlying the best current safety policies to be applied in future plants. It presents INSAG's understanding of the principles underlying the best current safety policies and practices of the nuclear power industry.
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Nuclear Regulatory Commission Issuances written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1979 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Tolerability of Risk from Nuclear Power Stations written by Great Britain. Health and Safety Executive and published by . This book was released on 1992 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document replaces the statement and proposals made in the discussion document Tolerability of Risk form Nuclear Power Stations published in 1988. It represents a revision of the earlier document in the light of comments received and of the discussion on the document during the Hinkley Point Inquiry and in the Inquiry report.
Download or read book Nuclear Power and the Environment written by Royal Society of Chemistry (Great Britain) and published by Royal Society of Chemistry. This book was released on 2011 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the political and social context for nuclear power generation, the nuclear fuel cycles and their implications for the environment.
Download or read book Risks and Benefits of Nuclear Energy written by and published by OECD Publishing. This book was released on 2007 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of sustainable development policies, decision making in the energy sector should be based on carefully designed trade-offs which take into account, insofar as feasible, all of the alternative options' advantages and drawbacks from the ec
Download or read book Assessment of Inertial Confinement Fusion Targets written by National Research Council and published by National Academies Press. This book was released on 2013-07-17 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.
Download or read book The Safety of Nuclear Power Reactors light Water cooled and Related Facilities written by U.S. Atomic Energy Commission and published by . This book was released on 1973 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Risk informed Methods and Applications in Nuclear and Energy Engineering written by Curtis Smith and published by Academic Press. This book was released on 2023-11-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Risk-informed Methods and Applications in Nuclear and Energy Engineering: Modelling, Experimentation, and Validation presents a comprehensive view of the latest technical approaches and experimental capabilities in nuclear energy engineering. Based on Idaho National Laboratory's popular summer school series, this book compiles a collection of entries on the cutting-edge research and knowledge presented by proponents and developers of current and future nuclear systems, focusing on the connection between modelling and experimental approaches. Included in this book are key topics such as probabilistic concepts for risk analysis, the survey of legacy reliability and risk analysis tools, and newly developed tools supporting dynamic probabilistic risk-assessment. This book is an insightful and inspiring compilation of work from top nuclear experts from INL. Industry professionals, researchers and academics working in nuclear engineering, safety, operations and training will gain a board picture of the current state-of-practice and be able to apply that to their own risk-assessment studies. - Based on Idaho National Laboratory's summer school series, this book is a collection of entries from proponents and developers of current and future nuclear systems - Provides an up-to-date view of current technical approaches and experimental capabilities in nuclear energy engineering, covering modeling and validation, and focusing on risk-informed methods and applications - Equips the reader with an understanding of various case studies and experimental validations to enable them to carry out a risk-assessment study
Download or read book Nuclear Power and Sustainable Development written by International Atomic Energy Agency and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transforming the energy system is at the core of the dedicated sustainable development goal on energy within the new United Nations development agenda. This publication explores the possible contribution of nuclear energy to addressing the issues of sustainable development through a large selection of indicators. It reviews the characteristics of nuclear power in comparison with alternative sources of electricity supply, according to economic, social and environmental pillars of sustainability. The findings summarized in this publication will help the reader to consider, or reconsider, the contribution that can be made by the development and operation of nuclear power plants in contributing to more sustainable energy systems.
Download or read book Lessons Learned from the Fukushima Nuclear Accident for Improving Safety of U S Nuclear Plants written by National Research Council (U.S.). Committee on Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants and published by National Academy Press. This book was released on 2014-10-29 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The March 11, 2011, Great East Japan Earthquake and tsunami sparked a humanitarian disaster in northeastern Japan. They were responsible for more than 15,900 deaths and 2,600 missing persons as well as physical infrastructure damages exceeding $200 billion. The earthquake and tsunami also initiated a severe nuclear accident at the Fukushima Daiichi Nuclear Power Station. Three of the six reactors at the plant sustained severe core damage and released hydrogen and radioactive materials. Explosion of the released hydrogen damaged three reactor buildings and impeded onsite emergency response efforts. The accident prompted widespread evacuations of local populations, large economic losses, and the eventual shutdown of all nuclear power plants in Japan. "Lessons Learned from the Fukushima Nuclear Accident for Improving Safety and Security of U.S. Nuclear Plants" is a study of the Fukushima Daiichi accident. This report examines the causes of the crisis, the performance of safety systems at the plant, and the responses of its operators following the earthquake and tsunami. The report then considers the lessons that can be learned and their implications for U.S. safety and storage of spent nuclear fuel and high-level waste, commercial nuclear reactor safety and security regulations, and design improvements. "Lessons Learned" makes recommendations to improve plant systems, resources, and operator training to enable effective ad hoc responses to severe accidents. This report's recommendations to incorporate modern risk concepts into safety regulations and improve the nuclear safety culture will help the industry prepare for events that could challenge the design of plant structures and lead to a loss of critical safety functions. In providing a broad-scope, high-level examination of the accident, "Lessons Learned" is meant to complement earlier evaluations by industry and regulators. This in-depth review will be an essential resource for the nuclear power industry, policy makers, and anyone interested in the state of U.S. preparedness and response in the face of crisis situations.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book Managing the Financial Risk Associated with the Financing of New Nuclear Power Plant Projects written by International Atomic Energy Agency and published by . This book was released on 2017-06 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication emphasizes how various risks -- including those typically considered to be 'engineering risks' -- will give rise to such financial risks.
Download or read book Safety Classification of Structures Systems and Components in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2014 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations and guidance on how to meet the requirements established in Specific Safety Requirements No. SSR-2/1 and in General Safety Requirements No. GSR Part 4 for the identification of structures, systems and components (SSCs) important to safety in nuclear power plants and for their classification on the basis of their function and safety significance. This Safety Guide is intended primarily for use by organizations involved in the design of nuclear power plants, as well as by regulatory bodies and their technical support organizations. The Safety Guide can also be applied to other nuclear installations subject to appropriate adjustments relevant to the specific design of the type of the facility being considered.
Download or read book Importance Measures in Reliability Risk and Optimization written by Way Kuo and published by John Wiley & Sons. This book was released on 2012-05-10 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique treatment systematically interprets a spectrum of importance measures to provide a comprehensive overview of their applications in the areas of reliability, network, risk, mathematical programming, and optimization. Investigating the precise relationships among various importance measures, it describes how they are modelled and combined with other design tools to allow users to solve readily many real-world, large-scale decision-making problems. Presenting the state-of-the-art in network analysis, multistate systems, and application in modern systems, this book offers a clear and complete introduction to the topic. Through describing the reliability importance and the fundamentals, it covers advanced topics such as signature of coherent systems, multi-linear functions, and new interpretation of the mathematical programming problems. Key highlights: Generalizes the concepts behind importance measures (such as sensitivity and perturbation analysis, uncertainty analysis, mathematical programming, network designs), enabling readers to address large-scale problems within various fields effectively Covers a large range of importance measures, including those in binary coherent systems, binary monotone systems, multistate systems, continuum systems, repairable systems, as well as importance measures of pairs and groups of components Demonstrates numerical and practical applications of importance measures and the related methodologies, including risk analysis in nuclear power plants, cloud computing, software reliability and more Provides thorough comparisons, examples and case studies on relations of different importance measures, with conclusive results based on the authors’ own research Describes reliability design such as redundancy allocation, system upgrading and component assignment. This book will benefit researchers and practitioners interested in systems design, reliability, risk and optimization, statistics, maintenance, prognostics and operations. Readers can develop feasible approaches to solving various open-ended problems in their research and practical work. Software developers, IT analysts and reliability and safety engineers in nuclear, telecommunications, offshore and civil industries will also find the book useful.
Download or read book Uranium Enrichment and Nuclear Weapon Proliferation written by Allan S. Krass and published by Routledge. This book was released on 2020-11-20 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1983, this book presents both the technical and political information necessary to evaluate the emerging threat to world security posed by recent advances in uranium enrichment technology. Uranium enrichment has played a relatively quiet but important role in the history of efforts by a number of nations to acquire nuclear weapons and by a number of others to prevent the proliferation of nuclear weapons. For many years the uranium enrichment industry was dominated by a single method, gaseous diffusion, which was technically complex, extremely capital-intensive, and highly inefficient in its use of energy. As long as this remained true, only the richest and most technically advanced nations could afford to pursue the enrichment route to weapon acquisition. But during the 1970s this situation changed dramatically. Several new and far more accessible enrichment techniques were developed, stimulated largely by the anticipation of a rapidly growing demand for enrichment services by the world-wide nuclear power industry. This proliferation of new techniques, coupled with the subsequent contraction of the commercial market for enriched uranium, has created a situation in which uranium enrichment technology might well become the most important contributor to further nuclear weapon proliferation. Some of the issues addressed in this book are: A technical analysis of the most important enrichment techniques in a form that is relevant to analysis of proliferation risks; A detailed projection of the world demand for uranium enrichment services; A summary and critique of present institutional non-proliferation arrangements in the world enrichment industry, and An identification of the states most likely to pursue the enrichment route to acquisition of nuclear weapons.
