Download or read book Risk Assessment In Chemical Process Industries written by Faisal Irshad Khan and published by Discovery Publishing House. This book was released on 1998 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: Introduction, Qualitative Methods of Risk Assessment, Quantitative Methods of Risk Assessment-I: Consequence Analysis, Quantitative Methods of Risk Assessment-II: Rapid Risk Assessment, Quantitative Methods of Risk Assessment-III: Probabilistic Hazard Assessment, Studies on Chain, of Accidents (Domino Effects), Methods of Hazard Identification, Screening and Ranking, Application of Risk Analysis in Process Design.
Download or read book Risk Assessment and Risk Management for the Chemical Process Industry written by Stone & Webster Engineering Corporation and published by John Wiley & Sons. This book was released on 1991-09-03 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tragic incident at Bhopal, India made it clear that safetyreviews for identification and control of accidents involving toxicchemicals must be more systematic. This guide shows how tointegrate hazard identification, risk assessment, consequenceanalysis, and risk mitigation into a formalized program forhandling hazardous chemicals. Most of the 21 contributors aresenior staff members at Stone & Webster EngineeringCorporation. They discuss how to perform and supervise safetystudies for chemical, petrochemical, petroleum refining, and otherfacilities. They discuss all aspects of detection, prevention, andmitigation of risks associated with processing, handling, andproduction of hazardous chemicals. Special attention is given tohazard identification and hazard assessment techniques ranging fromsimple screening checklists to highly structured Hazard andOperability (HAZOP) analysis. You're shown how to calculatepotential consequences of identified hazards, quantify thelikelihood of these events, and combine equipment failure rate dataand human reliability analysis with hazard assessment. You'll alsobenefit from the book's rundowns of how to * apply expert systems and artificial intelligence in riskmanagement * instill safety-oriented operating and maintenanceprocedures * train operators and emergency response personnel * conduct internal and external safety audits * perform chemical dispersion, explosion, and fire analyses * assess health effects from chemical releases * use insurance vehicles to deal with residual risk. Risk Assessment and Risk Management for the Chemical ProcessIndustry is an essential source on minimizing the dangers of toxicincidents and accidents. It is essential reading for safetyengineers, regulatory managers, environmental engineers, and otherprofessionals responsible for safety in chemical plants.
Download or read book Guidelines for Chemical Process Quantitative Risk Analysis written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical process quantitative risk analysis (CPQRA) as applied to the CPI was first fully described in the first edition of this CCPS Guidelines book. This second edition is packed with information reflecting advances in this evolving methodology, and includes worked examples on a CD-ROM. CPQRA is used to identify incident scenarios and evaluate their risk by defining the probability of failure, the various consequences and the potential impact of those consequences. It is an invaluable methodology to evaluate these when qualitative analysis cannot provide adequate understanding and when more information is needed for risk management. This technique provides a means to evaluate acute hazards and alternative risk reduction strategies, and identify areas for cost-effective risk reduction. There are no simple answers when complex issues are concerned, but CPQRA2 offers a cogent, well-illustrated guide to applying these risk-analysis techniques, particularly to risk control studies. Special Details: Includes CD-ROM with example problems worked using Excel and Quattro Pro. For use with Windows 95, 98, and NT.
Download or read book Risk Analysis and Reduction in the Chemical Process Industry written by J.M. Santamaría Ramiro and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concern for the environment has become one of the big issues in modern society, and one of the chief concerns is the environmental impact of modern industrial production. A particularly sensitive issue is the possibility of accidents in industries where there may be severe consequences for people, property and the environment. At one time the nuclear industry was seen as the most likely to be the cause of significant environmental damage, but after the occurrence of several major accidents such as Seveso, Flixborough and Bhopal, that concern extends to much of the chemicals industry. Pressure from society, reflected by strong legislation, coupled with a greater understanding of the impact that chemical processing operations can have, has led to the adoption of higher profile safety and environmental management programs within the chemical industry. Under these programmes existing and new processes are rigorously examined to determine the possible causes and consequences of failure, and the results used to improve the process to make failure less likely. Any process audit, aimed at improving safety or lessening the environmental impact, cannot be carried out using intuition or experience alone, so the discipline of risk analysis has grown as a collection of tools and methods which can be utilized to give a quantitative assessment of the risks involved in operating any given process. In this new book the authors present risk analysis and reduction in a clear and unified way, emphasizing the various different methods which can be used together in a global approach to risk analysis in the chemical process industries. Originally conceived as a text book for graduate level courses in chemical engineering, the clear presentation and thorough coverage will ensure that anyone involved in risk assessment, environmental impact assessment or safety planning will find this book an invaluable source of reference.
Download or read book Risk Assessment in the Process Industries written by Robin Turney and published by IChemE. This book was released on 1996 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this updated and amplified edition, Dr Pitblado answers the crucial questions of risk analysis: what can go wrong?; what are the effects and consequences?; and how often will it happen'.
Download or read book Chemical Process Industries written by Louis Theodore and published by CRC Press. This book was released on 2022-12-30 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth and expansion of the chemical process industry during the past century have been accompanied by a simultaneous rise in human health problems as well as material and property losses because of fires, explosions, hazardous and toxic spills, equipment failures, other accidents, and business interruptions. Concern over the potential consequences of emissions of harmful chemicals (along with catastrophic accidents) has sparked interest at both the industrial and regulatory levels in obtaining a better understanding of the potential for environmental health risks in chemical and related industries. This practical book presents and examines the environmental and health risk assessment calculations as they apply to various chemical process industries. Chemical Process Industries: Environmental and Health Risk Calculations can be used as a college text designed to provide new engineers and scientists some comprehension of the industries into which they may enter. It also serves as a useful reference for practitioners and will help them better understand the health risk aspects of various industrial operations. The chemical process industries employ mechanical, electrical, and civil engineers and a host of other scientists; these professions should also benefit from material in this book that applies to their fields of work.
Download or read book Hazards and Safety in Process Industries written by Mihir Kumar Purkait and published by CRC Press. This book was released on 2021-03-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in process industries is of utmost necessity to ensure protection from hazards. The aim of this book is to elucidate the hazards and preventive measures for a few of such specific industrial processes. Starting with overview of the prevalent industrial accidents, types of hazards and safety provisions, the book contains nineteen chapters with each one of them consisting of a unique case study comprising of basic causes, results and discussion, and protective measures to be adopted to overcome such situation. Topics covered include caprolactam storage tank accident, fire explosion accident caused by static electricity, and human factors risk and management in process safety and so forth. Aimed at researchers, professionals, graduate students in Chemical Engineering, Safety Management, Risk Assessment, Chemical Process Safety, this book: Provides exhaustive coverage of industrial case studies on their hazards and safety issues in the process industry set-up. Includes quantitative discussion on new and existing technologies and methodologies. Explores high quality descriptive and quantified data for better visualization of each chapter. Gives detailed description on various industrial accidents, their related consequences and available safety/preventive measures. Discusses preventive measures taken by world class industries in their production plants.
Download or read book Health Safety and Accident Management in the Chemical Process Industries written by Ann Marie Flynn and published by CRC Press. This book was released on 2001-10-02 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Analyzes health and hazard risk assessment in commercial, industrial, and refining industries. Emphasizes legal requirements, emergency planning and response, safety equipment, process implementation, and occupational and environmental protection exposure guidelines. Presents applicatoins and calculations for risk analysis of real systems, as well
Download or read book Security Risk Assessment written by Genserik Reniers and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-11-20 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the state-of-the-art of physical security knowledge and research in the chemical and process industries. Legislation differences between Europe and the USA are investigated, followed by an overview of the how, what and why of contemporary security risk assessment in this particular industrial sector. Innovative solutions such as attractiveness calculations and the use of game theory, advancing the present science of adversarial risk analysis, are discussed. The book further stands up for developing and employing dynamic security risk assessments, for instance based on Bayesian networks, and using OR methods to truly move security forward in the chemical and process industries.
Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.
Download or read book Evaluating Process Safety in the Chemical Industry written by J. S. Arendt and published by John Wiley & Sons. This book was released on 2010-08-27 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantitative Risk Analysis is a powerful tool used to help manage risk and improve safety. When used appropriately, it provides a rational basis for evaluating process safety and comparing alternative safety improvements. This guide, an update of an earlier American Chemistry Council (ACC) publication utilizing the "hands-on" experience of CPI risk assessment practitioners and safety professionals involved with the CCPS and ACC, explains how managers and users can make better-informed decisions about QRA, and how plant engineers and process designers can better understand, interpret and use the results of a QRA in their plant.
Download or read book Chemical Risk Analysis written by Bernard Martel and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook includes the principal methodological tools and data required to comprehend, evaluate and execute analysis of chemical risk in practical working situations. The dangerous property tables providing data on more than 1900 products, organic and inorganic, will be extremely useful to all readers working in the chemical and process industries and for those with occupational safety and health responsibilities. These tables are supplemented through the text by numerous figures and other tables, helping make this publication both comprehensive and accessible. · Now in an updated paperback edition · Numerous tables containing information on more than 1900 chemicals, organic and inorganic · Updating supplement by leading industry specialist on latest EC regulations regarding hazardous chemicals
Download or read book Bow Ties in Risk Management written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-10-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: AN AUTHORITATIVE GUIDE THAT EXPLAINS THE EFFECTIVENESS AND IMPLEMENTATION OF BOW TIE ANALYSIS, A QUALITATIVE RISK ASSESSMENT AND BARRIER MANAGEMENT METHODOLOGY From a collaborative effort of the Center for Chemical Process Safety (CCPS) and the Energy Institute (EI) comes an invaluable book that puts the focus on a specific qualitative risk management methodology – bow tie barrier analysis. The book contains practical advice for conducting an effective bow tie analysis and offers guidance for creating bow tie diagrams for process safety and risk management. Bow Ties in Risk Management clearly shows how bow tie analysis and diagrams fit into an overall process safety and risk management framework. Implementing the methods outlined in this book will improve the quality of bow tie analysis and bow tie diagrams across an organization and the industry. This important guide: Explains the proven concept of bow tie barrier analysis for the preventing and mitigation of incident pathways, especially related to major accidents Shows how to avoid common pitfalls and is filled with real-world examples Explains the practical application of the bow tie method throughout an organization Reveals how to treat human and organizational factors in a sound and practical manner Includes additional material available online Although this book is written primarily for anyone involved with or responsible for managing process safety risks, this book is applicable to anyone using bow tie risk management practices in other safety and environmental or Enterprise Risk Management applications. It is designed for a wide audience, from beginners with little to no background in barrier management, to experienced professionals who may already be familiar with bow ties, their elements, the methodology, and their relation to risk management. The missions of both the CCPS and EI include developing and disseminating knowledge, skills, and good practices to protect people, property and the environment by bringing the best knowledge and practices to industry, academia, governments and the public around the world through collective wisdom, tools, training and expertise. The CCPS has been at the forefront of documenting and sharing important process safety risk assessment methodologies for more than 30 years. The EI's Technical Work Program addresses the depth and breadth of the energy sector, from fuels and fuels distribution to health and safety, sustainability and the environment. The EI program provides cost-effective, value-adding knowledge on key current and future international issues affecting those in the energy sector.
Download or read book Dynamic Risk Analysis in the Chemical and Petroleum Industry written by Nicola Paltrinieri and published by Butterworth-Heinemann. This book was released on 2016-08-06 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Risk Analysis in the Chemical and Petroleum Industry focuses on bridging the gap between research and industry by responding to the following questions: - What are the most relevant developments of risk analysis? - How can these studies help industry in the prevention of major accidents? Paltrinieri and Khan provide support for professionals who plan to improve risk analysis by introducing innovative techniques and exploiting the potential of data share and process technologies. This concrete reference within an ever-growing variety of innovations will be most helpful to process safety managers, HSE managers, safety engineers and safety engineering students. This book is divided into four parts. The Introduction provides an overview of the state-of-the-art risk analysis methods and the most up-to-date popular definitions of accident scenarios. The second section on Dynamic Risk Analysis shows the dynamic evolution of risk analysis and covers Hazard Identification, Frequency Analysis, Consequence Analysis and Establishing the Risk Picture. The third section on Interaction with Parallel Disciplines illustrates the interaction between risk analysis and other disciplines from parallel fields, such as the nuclear, the economic and the financial sectors. The final section on Dynamic Risk Management addresses risk management, which may dynamically learn from itself and improve in a spiral process leading to a resilient system. - Helps dynamic analysis and management of risk in chemical and process industry - Provides industry examples and techniques to assist you with risk- based decision making - Addresses also the human, economic and reputational aspects composing the overall risk picture
Download or read book Evaluating Process Safety in the Chemical Industry written by J. S. Arendt and published by Wiley-AIChE. This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes some of the wisdom accumulated by chemical process industry risk analysis practitioners and safety professionals, providing information on the applicability of quantitative risk analysis (QRA) to the chemical processing industry. Discusses essentials of QRA, outlines considerations for deciding when to apply QRA, and describes practical situations in which QRA may be used successfully. Overviews the process of setting up an individual QRA, discusses the importance of defining the right problem for analysis, and overviews various classes of QRA techniques. The authors are affiliated with EQE International, Inc. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Risk Assessment in the Chemical Process Industries written by Kaplan Educational Center Staff and published by C R C Press Reprints. This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Safety of Chemical Processes written by Francis Stoessel and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the author's many years of experience in practicing safety assessment in industry and teaching students or professionals in this area, the topic of this book is seldom found on university curricula and many professionals do not have the knowledge required to interpret thermal data in terms of risks. For this reason, Francis Stoessel adopts a unique systematic how-to-do approach: Each chapter begins with a case history illustrating the topic and presenting the lessons learned from the incident. In so doing, he analyzes a goldmine of numerous examples stemming from industrial practice, additionally providing a series of problems or case studies at the end of each chapter. Divided into three distinct sections, part one looks at the general aspects of thermal process safety, while Part 2 deals with mastering exothermal reactions. The final section discusses the avoidance of secondary reactions, including heat accumulation and thermal confinement.
