Download or read book Performance Based Specifications and Control of Concrete Durability written by Hans Beushausen and published by Springer. This book was released on 2015-09-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work gives an overview of significant research from recent years concerning performance-based design and quality control for concrete durability and its implementation. In engineering practice, performance approaches are often still used in combination with prescriptive requirements. This is largely because, for most durability test methods, sufficient practical experience still has to be gained before engineers and owners are prepared to fully rely on them. This book, compiled by RILEM TC 230-PSC, is intended to assist efforts to successfully build the foundation for the full implementation of performance-based approaches through the exchange of relevant knowledge and experience between researchers and practitioners worldwide.

Download or read book Proceedings of the RILEM International Symposium on Bituminous Materials written by Hervé Di Benedetto and published by Springer Nature. This book was released on 2021-09-25 with total page 1806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in bituminous materials and structures and asphalt pavement technology, as presented by leading international researchers and engineers at the RILEM International Symposium on Bituminous Materials (ISBM), held in Lyon, France on December 14-16, 2020. The symposium represents a joint effort of three RILEM Technical Committees from Cluster F: 264-RAP “Asphalt Pavement Recycling”, 272-PIM “Phase and Interphase Behaviour of Bituminous Materials”, and 278-CHA “Crack-Healing of Asphalt Pavement Materials”. It covers a diverse range of topics concerning bituminous materials (bitumen, mastics, mixtures) and road, railway and airport pavement structures, including: recycling, phase and interphase behaviour, cracking and healing, modification and innovative materials, durability and environmental aspects, testing and modelling, multi-scale properties, surface characteristics, structure performance, modelling and design, non-destructive testing, back-analysis, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster new multidisciplinary collaborations.

Download or read book Fourth RILEM International Conference on Concrete and Digital Fabrication written by Dirk Lowke and published by Springer Nature. This book was released on with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book First RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2018 written by Timothy Wangler and published by Springer. This book was released on 2018-08-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.

Download or read book RILEM 252 CMB Symposium written by Lily D. Poulikakos and published by Springer. This book was released on 2018-09-12 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the Proceedings of the RILEM TC 252-CMB International Symposium on the Chemo-Mechanical Characterization of Bituminous Materials. The Symposium was attended by researchers and practitioners from different fields presenting the latest findings in the chemical, mechanical, and microstructural characterization of bituminous materials. The book offers new and cutting edge papers on innovative techniques for the characterization of bituminous materials, gaining new insights into current issues such as effects of aging, moisture, and temperature.

Download or read book 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials written by Francesco Canestrari and published by Springer. This book was released on 2015-09-24 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).

Download or read book Third RILEM International Conference on Concrete and Digital Fabrication written by Richard Buswell and published by Springer Nature. This book was released on 2022-06-24 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held in Loughborough, UK, on June 27-29, 2022. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book Proceedings of the RILEM Spring Convention and Conference 2024 written by Liberato Ferrara and published by Springer Nature. This book was released on with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book Proceedings of the 17th International Conference on Alkali Aggregate Reaction in Concrete written by Leandro F. M. Sanchez and published by Springer Nature. This book was released on with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 3rd RILEM Spring Convention and Conference RSCC 2020 written by Isabel B. Valente and published by Springer Nature. This book was released on 2021-07-05 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “New materials and structures for ultra‐durability”, which covers current scientific and technological developments aimed at improving knowledge about degradation mechanisms in construction materials, as well as to the development of new materials with extreme durability. Novel special materials for extreme environments or extreme loading conditions are also included, as well as novel approaches to improve the performance and durability of currently common construction materials. The following subtopics are included: general purpose, constructions, infrastructures and facilities; extreme environments and extreme events; transport and deterioration mechanisms, characterization and mitigation; Supplementary Cementitious Materials, admixtures, additions and other emerging material optimization strategies; smart materials for durable structures.

Download or read book Proceedings of the 3rd RILEM Spring Convention and Conference RSCC 2020 written by José Sena-Cruz and published by Springer Nature. This book was released on 2021-07-13 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Service life extension of existing structures”, which covers the most recent scientific and technological developments in the understanding of the evolution and degradation of construction materials and structural systems. Analytical and numerical, as well as experimental approaches, aimed at characterizing, modelling and predicting the evolution of the physical, chemical and mechanical properties of construction materials and structural systems are regarded. Multiphysics models are also considered, as well as other strategies that contribute for an accurate characterization and prediction the service life and the evolution of existing and novel construction materials under normal or extreme environmental exposure or loading conditions. New strategies to promote the smart repairing or the recovery of material properties, as well as the service life extension, are also considered. The following subtopics are included: service life models and multiphysics approaches; smart structures, innovative monitoring and intervention strategies; management and optimized maintenance strategies; integrated rehabilitation and strengthening approaches.

Download or read book Proceedings of the 7th International Conference on Concrete Repair Rehabilitation and Retrofitting written by Hans Beushausen and published by Springer Nature. This book was released on with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Second RILEM International Conference on Earthen Construction written by Christopher Beckett and published by Springer Nature. This book was released on with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 3rd RILEM Spring Convention and Conference RSCC 2020 written by Vítor M.C.F. Cunha and published by Springer Nature. This book was released on 2021-07-13 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM Spring Convention and Conference, held at Guimarães and hosted by the University of Minho, Portugal, on March 9-14, 2020. The theme of the Conference was “Ambitioning a Sustainable Future for Built Environment: comprehensive strategies for unprecedented challenges”, which was aimed at discussing current challenges and impacts of the built environment on sustainability. The present volume is dedicated to the topic “Shift to a circular economy”, which is focussed on sustainability and covers the research and recent technologies on the use and development of sustainable materials and structural systems, as well as on recycling and reusing. It also covers the implementation of industrial processes leading to minimized waste, including digital fabrication and deconstruction, as well as integrative approaches that lead to the achievement of the concept of circular economy. Additionally, this topic covers research on novel or existing construction materials and systems based on local resources and regional practices. The following subtopics are included: industrialized construction systems minimizing waste; recycling and reuse of materials and components; 4Ls: local constructions with local materials through local approaches for local development; Digital Manufacturing; design for deconstruction; smart demolition techniques; timber structures; Life-Cycle Assessment of construction materials and technologies; recycling of pavements and materials in roads.

Download or read book Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete written by Jose Fernando Martirena-Hernandez and published by Springer. This book was released on 2019-06-21 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications presented by leading international researchers and engineers at the International Conference on Sustainable Production and Use of Cement and Concrete (ICSPCC 2019), held in Villa Clara, Cuba on June 23-30, 2019. It covers highly diverse topics, including sustainable production of low-carbon cements, novelties in the development of supplementary cementitious materials, new techniques for the microstructural characterization of construction materials, Portland-based and alkaline-activated cementitious systems, development of additives and additions in the sustainable production of concrete, sustainable production of high-performance concrete, durable concrete produced with recycled aggregates, development of mortars for historical patrimony restoration, environmental and economic assessment of the production and use of cement. The contributions, which were selected by means of a rigorous, international peer-review process, highlight numerous exciting ideas that will inspire novel research directions and foster multidisciplinary collaboration between different specialists.

Download or read book Calcined Clays for Sustainable Concrete written by Fernando Martirena and published by Springer. This book was released on 2017-10-27 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on research and practical issues linked to Calcined Clays for Sustainable Concrete. The main topics are geology of clays, hydration and performance of blended system with calcined clays, alkali activated binders, applications in concrete and mortar, durability of concrete under various aggressive conditions, and economic and environmental impacts of the use of calcined clays in cement based materials. This book compiles the different contributions of the 2nd International Conference on Calcined Clays for Sustainable Concrete, which took place in La Habana, December 5th-7th, 2017.The papers update the latest research in their field, carried out since the last conference in 2015. Overall it gives a broad view of research on calcined clays and their application in the field of construction, which will stimulate further research into calcined clays for sustainable concrete.