Download or read book Rheology and Processing of Polymeric Materials written by Chang Dae Han and published by Oxford University Press. This book was released on 2007-05-16 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents first fundamental principles of the rheology of polymeric fluid including kinematics and stresses of a deformable body, the continuum theory for the viscoelasticity of flexible homogeneous polymeric liquids, the molecular theory for the viscoelasticity of flexible homogeneous polymeric liquids, and the experimental methods for the measurement of the rheological properties of poylmeric liquids. The materials presented are intended to set a stage for the subsequent chapters by introducing the basic concepts and principles of rheology, from both phenomenological and molecular perspectives, ofstructurally simple flexible and homogeneous polymeric liquids. Next, this volume presents the rheological behavior of structurally complex polymeric materials including miscible polymer blends, block copolymers, liquid-crystalline polymers, thermoplastic polyurethanes, immiscible polymer blends, perticulare-filled polymers, organoclay nanocomposites, molten polymers with dissolved gas, and thermosts.
Download or read book Rheology and Processing of Polymeric Materials written by Chang Dae Han and published by Oxford University Press. This book was released on 2007-06-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 presents the fundamental principles related to polymer processign operations including the processing of thermoplastic polymers and thermosets. The objective of this volume is not to provide recipies that necessarily guarantee better product quality. Rather, emphasis is placed on presenting a fundamental approach to effectively analyze processing operations. The specific polymer processing operations for thermoplastics include plasticating single-screw extrusion, morphology evolution during compounding of polymer blends, compatibilization of immiscible polymer blends, wire coating extrusion, fiber spinning, tubular film blowing, coextrusion, and thermoplastic foam extrusion. The specific polymer processing operations for thermosets include reaction injection molding, pultrusion of fiber-reinforced thermosets, and compression molding of thermoset composites.
Download or read book Rheology and Processing of Polymeric Materials Volume 1 Polymer Rheology written by Chang Dae Han and published by Oxford University Press, USA. This book was released on 2007 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 1 presents first fundamental principles of the rheology of polymeric fluid including kinematics and stresses of a deformable body, the continuum theory for the viscoelasticity of flexible homogeneous polymeric liquids, the molecular theory for the viscoelasticity of flexible homogeneous polymeric liquids, and the experimental methods for the measurement of the rheological properties of poylmeric liquids. The materials presented are intended to set a stage for the subsequent chapters by introducing the basic concepts and principles of rheology, from both phenomenological and molecular perspectives, ofstructurally simple flexible and homogeneous polymeric liquids. Next, this volume presents the rheological behavior of structurally complex polymeric materials including miscible polymer blends, block copolymers, liquid-crystalline polymers, thermoplastic polyurethanes, immiscible polymer blends, perticulare-filled polymers, organoclay nanocomposites, molten polymers with dissolved gas, and thermosts.
Download or read book Introduction to Polymer Rheology and Processing written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2018-01-18 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Polymer Rheology and Processing is a practical desk reference providing an overview of operating principles, data interpretation, and qualitative explanation of the importance and relationship of rheology to polymer processing operations. It covers full-scale processing operations, relating industrial processing operations and design methodology to laboratory-scale testing. Hundreds of design formulas applicable to scaling up the processing behavior of polymeric melts are presented. The book also provides a "working knowledge" description of major rheological test methods useful in product development and includes a useful glossary of polymer and test method/instrumentation definitions. Lavishly illustrated and featuring numerous sample calculations and modeling approaches, An Introduction to Polymer Rheology and Processing is a "must have" book for polymer engineers and rheologists.
Download or read book Rheology in Polymer Processing written by Chang Dae Han and published by . This book was released on 1976 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.
Download or read book Elastic Behavior of Polymer Melts written by Helmut Münstedt and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2019-07-08 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the elastic properties of polymer melts is necessary for ensuring successful polymer processing and thus producing high-quality plastic parts. This unique book is the first to focus on this important topic. Starting with the molecular origin of elastic behavior and an explanation of the physical quantities involved, experimental methods and the dependence of elastic behavior on experimental parameters are then presented. Elastic properties of filled and unfilled systems are compared directly, and polymer blends are also considered. Elastic effects in various applications are included, such as in extrudate swell, internal stresses, and shrink films, to illustrate the importance of this field in the plastics processing industry.
Download or read book Polymer Rheology written by R.S. Lenk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything flows, so rheology is a universal science. Even if we set aside claims of such width, there can be no doubt of its importance in polymers. It joins with chemistry in the polymerisation step but polymer engineering is supreme in all the succeeding steps. This is the area concerned with the fabrication of the polymer into articles or components, with their design to meet the needs in service, and with the long and short term performance of the article or component. This is a typical area of professional engineering activity, but one as yet without its proper complement of professional engineers. An understanding of polymer rheology is the key to effective design and material plus process selection, to efficient fabrication, and to satisfactory service, yet few engineers make adequate use of what is known and understood in polymer rheology. Its importance in the flow processes of fabrication is obvious. Less obvious, but equally important, are the rheological phenomena which determine the in-service performance. There is a gap between the polymer rheologist and the polymer engineer which is damaging to both parties and which contributes to a less than satisfactory use of polymers in our society. It is important that this gap be filled and this book makes an attempt to do so. It presents an outline of what is known in a concise and logical fashion. It does this starting from first principles and with the minimum use of complex mathematics.
Download or read book Polymer Rheology Theory and Practice written by Y.G. Yanovsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book is devoted to a rapidly developing field of science which studies the behavior of viscoelastic materials under the influence of deformation~the rheology of polymers. Rheology has long been treated as the theoretical foundation of polymer processing, and from this standpoint it is difficult to overesti mate its importance in practice. Rheology plays an important role in developing our ideas on the nature of viscoelastic behavior in connection with the structural features of polymers and composites based on them. This expands the possibilities of employing rheological methods to characterize a variety of materials and greatly magnifies the interest in this field of research. The rheological properties of polymer systems are studied experimen tally, chiefly under conditions of shear and tensile strains. One explana tion is that many aspects of polymer material processing are associated with the stretching of melts or a combination of shear and tensile strains. In scientific investigations, either periodic or continuous conditions of shear deformation are employed. Each mode provides widespread infor mation. In periodic deformation, most attention is generally given to conditions with low deformation amplitudes that do not alter the structure of the polymer system during an experiment (the region of linear deformation conditions). Here the viscoelastic parameters are generally determined with respect to the frequency. Continuous deforma tion involves considerable strains, and may be attended by significant reversible and irreversible changes in the structure of a polymer.
Download or read book Introduction to Polymer Rheology written by Montgomery T. Shaw and published by John Wiley & Sons. This book was released on 2012-01-12 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the rheology of polymers, with simple math Designed for practicing scientists and engineers interested in polymer rheology science, education, consulting, or research and development, Introduction to Polymer Rheology is a comprehensive yet accessible guide to the study of the deformation and flow of matter under applied stress. Often considered a complicated topic for beginners, the book makes grasping the fundamentals of polymer rheology easy by presenting information in an approachable way and limiting the use of complex mathematics. By doing so, this introductory overview provides readers with easy access to the key concepts underlying the flow behavior of polymer melts, solutions, and suspensions. Incorporating sample problems that are worked through and explained on the page, as well as numerous practice problems to gauge learning comprehension, the book prepares new students and practitioners for moving on to more advanced concepts. Comprising twelve chapters, the book covers stress, velocity and rate of deformation, the relationship between stress and rate of deformation (Newtonian fluid), generalized Newtonian fluids, normal stresses and elastic behavior, experimental methods, small and large strain, the molecular origins of rheological behavior, elementary polymer processing concepts, quality control in rheology, and the flow of modified polymers and those with supermolecular structure. The essential reference for accurately interpreting polymer rheology data, Introduction to Polymer Rheology provides readers with an elementary understanding of the key issues and modern approaches to resolving problems in the field. An Instructor’s Guide with answers to select problems in the text, 60 new problems with full solutions, hints for effective presentation of the material in the text, and an errata listing is available for professors using the book as a course textbook.
Download or read book Polymer Melt Rheology written by F N Cogswell and published by Elsevier. This book was released on 1981-01-01 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the ways in which melt flow behaviour can be exploited by the plastics engineer and technician for increased efficiency of processing operation, control of end product properties and selection and development of polymers for specific purposes. (reissued with minor corrections 1994)
Download or read book Polymer Rheology written by Tim A. Osswald and published by Hanser Gardner Publications. This book was released on 2015 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology unites the seemingly unrelated fields of plasticity and non-Newtonian fluids by recognizing that both these types of materials are unable to support a shear stress in static equilibrium. In this sense, a plastic solid is a fluid. Granular rheology refers to the continuum mechanical description of granular materials. In this book, rheology--the study of the deformation and flow of matter--is treated primarily in the context of the stresses generated during the flow of complex materials such as polymers, colloids, foams, and gels. A rapidly growing and industrially important field, it plays a significant role in polymer processing, food processing, coating and printing, and many other manufacturing processes.
Download or read book Viscoelasticity of Polymers written by Kwang Soo Cho and published by Springer. This book was released on 2016-05-30 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive introduction to polymer rheology with a focus on the viscoelastic characterization of polymeric materials. It contains various numerical algorithms for the processing of viscoelastic data, from basic principles to advanced examples which are hard to find in the existing literature. The book takes a multidisciplinary approach to the study of the viscoelasticity of polymers, and is self-contained, including the essential mathematics, continuum mechanics, polymer science and statistical mechanics needed to understand the theories of polymer viscoelasticity. It covers recent achievements in polymer rheology, such as theoretical and experimental aspects of large amplitude oscillatory shear (LAOS), and numerical methods for linear viscoelasticity, as well as new insights into the interpretation of experimental data. Although the book is balanced between the theoretical and experimental aspects of polymer rheology, the author’s particular interest in the theoretical side will not remain hidden. Aimed at readers familiar with the mathematics and physics of engineering at an undergraduate level, the multidisciplinary approach employed enables researchers with various scientific backgrounds to expand their knowledge of polymer rheology in a systematic way.
Download or read book Rheology and Processing of Polymer Nanocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2016-08-25 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology and Processing of Polymer Nanocomposites examines the current state of the art and new challenges in the characterization of nanofiller/polymer interactions, nanofiller dispersion, distribution, filler-filler interactions and interfaces in polymer nanocomposites. A one-stop reference resource for important research accomplishments in this area, it benefits academics, researchers, scientists, and engineers in the field of polymer nanocomposites in their daily work.
Download or read book Applied Polymer Rheology written by Marianna Kontopoulou and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore polymer rheology from an industrial standpoint Presenting state-of-the-art polymer rheology as observed by well-recognized authors, Applied Polymer Rheology: Polymeric Fluids with Industrial Applications is designed to help readers understand the relationship between molecular structure and the flow behavior of polymers. In particular, it focuses on polymeric systems that elicit special attention from industry. Providing a comprehensive overview of the rheological characteristics of polymeric fluids, the book bridges the gap between theory and practice/application, enabling readers to see the connection between molecular structure and the behavior of the polymers studied. Beginning with a discussion of the properties, processability, and processing aids of specific polymers, later chapters examine filled polymers and composites, and the theoretical framework upon which their analysis is based. Various systems containing microstructure are presented subsequently, with the final chapter introducing paste extrusion of polytetrafluoroethylene paste. An invaluable reference guide that covers the literature and vast array of technical approaches to polymer rheology, Applied Polymer Rheology's coverage of polymeric fluids of interest to industry make it an essential resource for plastics, polymer, and chemical engineers, materials scientists, polymer chemists, and polymer physicists to use when interpreting findings and planning experiments.
Download or read book Rheology of Polymer Blends and Nanocomposites written by Sabu Thomas and published by Elsevier. This book was released on 2019-09-08 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology of Polymer Blends and Nanocomposites: Theory, Modelling and Applications focuses on rheology in polymer nanocomposites. It provides readers with a solid grounding in the fundamentals of rheology, with an emphasis on recent advancements. Chapters explore potential future applications for nanocomposites and polymer blends, giving readers a thorough understanding of the specific features derived from rheology as a tool for the study of polymer blends and nanocomposites. This book is ideal for industrial and academic researchers in the field of polymer blends and nanocomposites, but is also a great resource for anyone who wants to learn about the applications of rheology. Sets out the principles of rheology as it is applied to polymer blends and nanocomposites Demonstrates how rheological techniques are best applied to different classes of nanocomposites Assesses the opportunities and major challenges of rheological approaches to polymer blends and nanocomposites
Download or read book Polymer and Composite Rheology Second Edition written by Rakesh K. Gupta and published by CRC Press. This book was released on 2000-06-14 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analysis of polymer and composite rheology. This second edition covers flow properties of thermoplastic and thermoset polymers, and general principles and applications of all phases of polymer rheology, with new chapters on the rheology of particulate and fibre composites. It also includes new and expanded detail on polymer blends and emulsions, foams, reacting systems, and flow through porous media as well as composite processing operations.
