Download or read book RF MEMS Technology for High Performance Passives written by J Iannacci and published by Myprint. This book was released on 2017-11-24 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical Guide to RF MEMS written by Jacopo Iannacci and published by John Wiley & Sons. This book was released on 2013-08-12 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between hardcore-theoretical and purely experimental RF-MEMS books. The book covers, from a practical viewpoint, the most critical steps that have to be taken in order to develop novel RF-MEMS device concepts. Prototypical RF-MEMS devices, both including lumped components and complex networks, are presented at the beginning of the book as reference examples, and these are then discussed from different perspectives with regard to design, simulation, packaging, testing, and post-fabrication modeling. Theoretical concepts are introduced when necessary to complement the practical hints given for all RF-MEMS development stages. Provides researchers and engineers with invaluable practical hints on how to develop novel RF-MEMS device concepts Covers all critical steps, dealing with design, simulation, optimization, characterization and fabrication of MEMS for radio-frequency applications Addresses frequently disregarded issues, explicitly treating the hard to predict interplay between the three-dimensional device structure and its electromagnetic functionality Bridges theory and experiment, fundamental concepts are introduced with the application in mind, and simulation results are validated against experimental results Appeals to the practice-oriented R&D reader: design and simulation examples are based on widely known software packages such as ANSYS and the hardware description language Verilog.

Download or read book RF MEMS and Their Applications written by Vijay K. Varadan and published by John Wiley & Sons. This book was released on 2003-07-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS) refer to a collection of micro-sensors and actuators, which can react to environmental change under micro- circuit control. The integration of MEMS into traditional Radio Frequency (RF) circuits has resulted in systems with superior performance levels and lower manufacturing costs. The incorporation of MEMS based fabrication technologies into micro and millimeter wave systems offers viable routes to ICs with MEMS actuators, antennas, switches and transmission lines. The resultant systems operate with an increased bandwidth and increased radiation efficiency and have considerable scope for implementation within the expanding area of wireless personal communication devices. This text provides leading edge coverage of this increasingly important area and highlights the overlapping information requirements of the RF and MEMS research and development communities. * Provides an introduction to micromachining techniques and their use in the fabrication of micro switches, capacitors and inductors * Includes coverage of MEMS devices for wireless and Bluetooth enabled systems Essential reading for RF Circuit design practitioners and researchers requiring an introduction to MEMS technologies, as well as practitioners and researchers in MEMS and silicon technology requiring an introduction to RF circuit design.

Download or read book Passive RF Component Technology written by Guo'an Wang and published by Artech House. This book was released on 2012 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on novel materials and techniques, this pioneering volume provides you with a solid understanding of the design and fabrication of smart RF passive components. You find comprehensive details on LCP, metal materials, ferrite materials, nano materials, high aspect ratio enabled materials, green materials for RFID, and silicon micromachining techniques. Moreover, this practical book offers expert guidance on how to apply these materials and techniques to design a wide range of cutting-edge RF passive components, from MEMS switch based tunable passives and 3D passives, to metamaterial-based passives and on-chip passives. Supported with over 145 illustrations, this forward-looking resource summarizes the growing trend of smart RF passive component design and serves as a guide to the performance improving and cost-down solutions this technology offers the next generation of wireless communications.

Download or read book Handbook of Mems for Wireless and Mobile Applications written by Deepak Uttamchandani and published by Elsevier. This book was released on 2013-08-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for mobile and wireless sensing necessitates the use of highly integrated technology featuring small size, low weight, high performance and low cost: micro-electro-mechanical systems (MEMS) can meet this need. The Handbook of MEMS for wireless and mobile applications provides a comprehensive overview of radio frequency (RF) MEMS technologies and explores the use of these technologies over a wide range of application areas.Part one provides an introduction to the use of RF MEMS as an enabling technology for wireless applications. Chapters review RF MEMS technology and applications as a whole before moving on to describe specific technologies for wireless applications including passive components, phase shifters and antennas. Packaging and reliability of RF MEMS is also discussed. Chapters in part two focus on wireless techniques and applications of wireless MEMS including biomedical applications, such as implantable MEMS, intraocular pressure sensors and wireless drug delivery. Further chapters highlight the use of RF MEMS for automotive radar, the monitoring of telecommunications reliability using wireless MEMS and the use of optical MEMS displays in portable electronics.With its distinguished editor and international team of expert authors, the Handbook of MEMS for wireless and mobile applications is a technical resource for MEMS manufacturers, the electronics industry, and scientists, engineers and academics working on MEMS and wireless systems. - Reviews the use of radio frequency (RF) MEMS as an enabling technology for wireless applications - Discusses wireless techniques and applications of wireless MEMS, including biomedical applications - Describes monitoring structures and the environment with wireless MEMS

Download or read book Micro and Nanoelectronics Devices Circuits and Systems written by Trupti Ranjan Lenka and published by Springer Nature. This book was released on 2022-09-12 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Micro and Nanoelectronics Devices, Circuits and Systems (MNDCS-2022). The book includes cutting-edge research papers in the emerging fields of micro and nanoelectronics devices, circuits, and systems from experts working in these fields over the last decade. The book is a unique collection of chapters from different areas with a common theme and is immensely useful to academic researchers and practitioners in the industry who work in this field.

Download or read book Proceedings of the Future Technologies Conference FTC 2021 Volume 1 written by Kohei Arai and published by Springer Nature. This book was released on 2021-10-23 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of important topics including but not limited to Technology Trends, Computing, Artificial Intelligence, Machine Vision, Communication, Security, e-Learning, and Ambient Intelligence and their applications to the real world. The sixth Future Technologies Conference 2021 was organized virtually and received a total of 531 submissions from academic pioneering researchers, scientists, industrial engineers, and students from all over the world.. After a double-blind peer review process, 191 submissions have been selected to be included in these proceedings. One of the meaningful and valuable dimensions of this conference is the way it brings together a large group of technology geniuses in one venue to not only present breakthrough research in future technologies, but also to promote discussions and debate of relevant issues, challenges, opportunities and research findings. We hope that readers find the book interesting, exciting, and inspiring; it provides the state-of-the-art intelligent methods and techniques for solving real-world problems along with a vision of the future research.

Download or read book New Materials and Devices Enabling 5G Applications and Beyond written by Nadine Collaert and published by Elsevier. This book was released on 2024-01-24 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Materials and Devices for 5G Applications and Beyond focuses on the materials, device architectures and enabling integration schemes for 5G applications and emerging technologies. It gives a comprehensive overview of the trade-offs, challenges and unique properties of novel upcoming technologies. Starting from the application side and its requirements, the book examines different technologies under consideration for the different functions, both more conventional to exploratory, and within this context the book provides guidance to the reader on how to possibly optimize the system for a particular application. This book aims at guiding the reader through the technologies required to enable 5G applications, with the main focus on mm-wave frequencies, up to THz. New Materials and Devises for 5G Applications and Beyond is suitable for industrial researchers and development engineers, and researchers in materials science, device engineering and circuit design. - Reviews challenges and emerging opportunities for materials, devices, and integration to enable 5G technologies - Includes discussion of technologies such as RF-MEMs, RF FINFETs, and transistors based on current and emerging materials (InP, GaN, etc.) - Focuses on mm-wave frequencies up to the terahertz regime

Download or read book Advanced RF MEMS written by Stepan Lucyszyn and published by Cambridge University Press. This book was released on 2010-08-19 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date guide to the theory and applications of RF MEMS. With detailed information about RF MEMS technology as well as its reliability and applications, this is a comprehensive resource for professionals, researchers, and students alike. • Reviews RF MEMS technologies • Illustrates new techniques that solve long-standing problems associated with reliability and packaging • Provides the information needed to incorporate RF MEMS into commercial products • Describes current and future trends in RF MEMS, providing perspective on industry growth • Ideal for those studying or working in RF and microwave circuits, systems, microfabrication and manufacturing, production management and metrology, and performance evaluation

Download or read book Micromachined Circuits and Devices written by Shiban Kishen Koul and published by Springer Nature. This book was released on 2022-02-07 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the design of different switching and resonant devices using the present state-of-the-art radio frequency (RF) micromachining (MEMS) technology. Different topologies of MEMS switches have been discussed considering optimum performances over microwave to millimeter wave frequency range. Wide varieties of micromachined switching networks starting from single-pole-double-throw (SPDT) to single-pole-fourteen-throw (SP14T) are discussed utilizing vertical and lateral actuation movements of the switch. Different transduction mechanisms of micromachined resonators are highlighted that includes capacitive, piezoelectric, and piezoresistive types. The book provides major design guidelines for the development of MEMS-based digital phase shifters, tunable filters, and antennas with extensive measurement data. Apart from the radio frequency (RF) requirements, an extensive guideline is given for the improvement of the reliability of micromachined switches and digital phase shifters where multiple switches are operating simultaneously. It takes multiple iterations and extensive characterizations to conclude with a reliable MEMS digital phase shifter, and these aspects are given one of the prime attentions in this book. Detailed performance analysis of metamaterial inspired MEMS switches is then discussed for application in millimeter wave frequency bands up to about 170 GHz. The book concludes with future research activities of RF MEMS technology and its potential in space, defense, sensors, and biomedical applications.

Download or read book Smart Sensors and MEMS written by S Nihtianov and published by Woodhead Publishing. This book was released on 2018-02-27 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Sensors and MEMS: Intelligent Devices and Microsystems for Industrial Applications, Second Edition highlights new, important developments in the field, including the latest on magnetic sensors, temperature sensors and microreaction chambers. The book outlines the industrial applications for smart sensors, covering direct interface circuits for sensors, capacitive sensors for displacement measurement in the sub-nanometer range, integrated inductive displacement sensors for harsh industrial environments, advanced silicon radiation detectors in the vacuum ultraviolet (VUV) and extreme ultraviolet (EUV) spectral range, among other topics. New sections include discussions on magnetic and temperature sensors and the industrial applications of smart micro-electro-mechanical systems (MEMS). The book is an invaluable reference for academics, materials scientists and electrical engineers working in the microelectronics, sensors and micromechanics industry. In addition, engineers looking for industrial sensing, monitoring and automation solutions will find this a comprehensive source of information. - Contains new chapters that address key applications, such as magnetic sensors, microreaction chambers and temperature sensors - Provides an in-depth information on a wide array of industrial applications for smart sensors and smart MEMS - Presents the only book to discuss both smart sensors and MEMS for industrial applications

Download or read book Handbook of Integrated Circuit Industry written by Yangyuan Wang and published by Springer Nature. This book was released on 2023-12-29 with total page 2006 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by hundreds experts who have made contributions to both enterprise and academics research, these excellent reference books provide all necessary knowledge of the whole industrial chain of integrated circuits, and cover topics related to the technology evolution trends, fabrication, applications, new materials, equipment, economy, investment, and industrial developments of integrated circuits. Especially, the coverage is broad in scope and deep enough for all kind of readers being interested in integrated circuit industry. Remarkable data collection, update marketing evaluation, enough working knowledge of integrated circuit fabrication, clear and accessible category of integrated circuit products, and good equipment insight explanation, etc. can make general readers build up a clear overview about the whole integrated circuit industry. This encyclopedia is designed as a reference book for scientists and engineers actively involved in integrated circuit research and development field. In addition, this book provides enough guide lines and knowledges to benefit enterprisers being interested in integrated circuit industry.

Download or read book 33rd European Microwave Conference 2003 Tuesday 7th October 2003 written by and published by . This book was released on 2003 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Semiconductor Advanced Packaging written by John H. Lau and published by Springer Nature. This book was released on 2021-05-17 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the design, materials, process, fabrication, and reliability of advanced semiconductor packaging components and systems. Both principles and engineering practice have been addressed, with more weight placed on engineering practice. This is achieved by providing in-depth study on a number of major topics such as system-in-package, fan-in wafer/panel-level chip-scale packages, fan-out wafer/panel-level packaging, 2D, 2.1D, 2.3D, 2.5D, and 3D IC integration, chiplets packaging, chip-to-wafer bonding, wafer-to-wafer bonding, hybrid bonding, and dielectric materials for high speed and frequency. The book can benefit researchers, engineers, and graduate students in fields of electrical engineering, mechanical engineering, materials sciences, and industry engineering, etc.

Download or read book MEMS based Circuits and Systems for Wireless Communication written by Christian C Enz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: MEMS-based Circuits and Systems for Wireless Communications provides comprehensive coverage of RF-MEMS technology from device to system level. This edited volume places emphasis on how system performance for radio frequency applications can be leveraged by Micro-Electro-Mechanical Systems (MEMS). Coverage also extends to innovative MEMS-aware radio architectures that push the potential of MEMS technology further ahead. This work presents a broad overview of the technology from MEMS devices (mainly BAW and Si MEMS resonators) to basic circuits, such as oscillators and filters, and finally complete systems such as ultra-low-power MEMS-based radios. Contributions from leading experts around the world are organized in three parts. Part I introduces RF-MEMS technology, devices and modeling and includes a prospective outlook on ongoing developments towards Nano-Electro-Mechanical Systems (NEMS) and phononic crystals. Device properties and models are presented in a circuit oriented perspective. Part II focusses on design of electronic circuits incorporating MEMS. Circuit design techniques specific to MEMS resonators are applied to oscillators and active filters. In Part III contributors discuss how MEMS can advantageously be used in radios to increase their miniaturization and reduce their power consumption. RF systems built around MEMS components such as MEMS-based frequency synthesis including all-digital PLLs, ultra-low power MEMS-based communication systems and a MEMS-based automotive wireless sensor node are described.

Download or read book A Fresh Concept of Software resemblant Hardware to Leap to 6G and Future Networks written by Jacopo Iannacci and published by CRC Press. This book was released on 2024-04-01 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a decade, with the uptake of 4G, we have become accustomed to the relentless increase in data and services on the move. The deployment of 5G is advancing crucial key performance indicators (KPIs), along with quality of service (QoS). Setting the horizon to 2030 and later, 6G will take the KPIs to numbers 100–1000 times better than 5G. Yet, the actual disruption of 6G and future networks (FN) will take place following other unprecedented paths. Artificial intelligence (AI) will be exploited in a threadlike fashion, at any level of the network physical infrastructure. This will introduce, to date unknown features, like self-sustaining, self-evolution and high-resilience of small portions of the infrastructure, pioneering the concept of a network of networks. Each segment of the infrastructure will bear a high degree of independence, while working at the same time as a whole, in full orchestration with the rest of the network. Given such a scenario, this book claims that the established and currently in use paradigms for the design and development of hardware–software (HW–SW) systems, are not appropriate to address the challenges of 6G and, further ahead, of FN. In response, unprecedented design approaches are suggested, relying on a fresh reinterpretation of the standard concept of HW, with specific attention to the network edge and edge intelligence (EI). This work develops some conceptual tools that may help address the technical challenges resulting from the intricate scenario sketched above. Within the mentioned HW reconceptualization, a pivotal role is forecasted for microtechnologies and nanotechnologies, intended with a broad meaning, which embraces, among others, devices, systems (MEMS/NEMS) and materials.

Download or read book Distributed Intelligent Circuits And Systems written by Balwinder Baj and published by World Scientific. This book was released on 2024-03-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main objective of this book is to provide insights into recent advances in distributed intelligent circuits, systems and their applications. Distributed intelligence is the key enabler for innovations in machine-to-machine communications. The innovations are directed towards keeping existing algorithms as the base and developing new intelligent systems by employing smart technologies. Artificial intelligence (AI) and, more specifically, deep learning (DL) are receiving significant attention in assisting doctors in the detection of disease patterns without much human intervention. In agriculture, robots automate slow, repetitive and dull tasks, allowing farmers to focus more on improving overall production yields.The evolving trends point to the interface of artificial intelligence with machines being a factor in enhancing the decision-making capabilities of smart machines. This book provides relevant theoretical frameworks that include basic models, algorithms, circuit designs and the latest developments in experimental aspects in the field of distributed intelligence systems for industrial applications. The challenges encountered in the development of models for distributed intelligence systems for environmental monitoring are mitigated with artificial intelligence, machine learning and deep learning. This book identifies challenges and helps in applying solutions in the development of advanced intelligent systems for environmental monitoring.