Download or read book International Linear Collider Technical Review Committee Second Report 2003 written by International Linear Collider Technical Review Committee and published by . This book was released on 2003 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RF Superconductivity for Accelerators written by Hasan Padamsee and published by John Wiley & Sons. This book was released on 2008-02-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces some of the key ideas of this exciting field, using a pedagogic approach, and presents a comprehensive overview of the field. It is divided into four parts. The first part introduces the basic concepts of microwave cavities for particle acceleration. The second part is devoted to the observed behavior of superconducting cavities. In the third part,general issues connected with beam-cavity interaction and the related issues for the critical components are covered. The final part discusses applications of superconducting cavities to frontier accelerators of the future, drawing heavily on the examples that are in their most advanced stage. Each part of the book ends in a Problems section to illustrate and amplify text material as well as draw on example applications of superconducting cavities to existing and future accelerators.

Download or read book RF Linear Accelerators written by Thomas P. Wangler and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses einschlägige Lehrbuch, entwickelt auf der Grundlage der Ausbildung an der US Particle Accelerator School, schließt eine Lücke in der verfügbaren Literatur zum Thema Hochfrequenz-Linearbeschleuniger, kurz RF-Linac. Nach einer Erläuterung der naturwissenschaftlichen Grundlagen und der neuesten technologischen Eckdaten stellt diese zweite Auflage neueste RF-Linacs, spezialisierte Systeme, Systeme mit Supraleitern und verschiedene Spezialverfahren vor. Übungsaufgaben an den Kapitelenden erleichtern das Einprägen und das Nacharbeiten von Vorlesungen.

Download or read book Toward a Science Campus in Milan written by Pier Francesco Bortignon and published by Springer. This book was released on 2018-12-08 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of multidisciplinary papers presented at the Department of Physics of Milan University's congress on 28 and 29 June 2017, which was also intended as a kick-off meeting for the design of a novel science campus at the Expo site in Milan. The congress presented a snapshot of the department's research to the academic community, the media, policymakers and authorities as well as the public at large, and also provided an opportunity to strengthen interdisciplinary collaborations between the members of the department and other communities. This book is a valuable resource for scientists looking for synergetic projects, policymakers wanting to grasp scientists' points of view and for prospective graduate students seeking expanding areas of research.

Download or read book The New Superconducting Electronics written by Harold Weinstock and published by Springer Science & Business Media. This book was released on 1993 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a review of recent advances in all aspects of superconducting electronics, both for the traditional (4 K) liquid helium based (LTS) materials and the more recent ceramic (HTS) materials that can operate at higher temperatures in the range of liquid nitrogen (77 K).

Download or read book Elementary Particles Accelerators and Colliders written by Ugo Amaldi and published by Springer. This book was released on 2013-03-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a historical consideration of the types and evolution of accelerators the physics of particle beams is provided in detail. Topics dealt with comprise linear and nonlinear beam dynamics, collective phenomena in beams, and interactions of beams with the surroundings. The design and principles of synchrotrons, circular and linear colliders, and of linear accelerators are discussed next. Also technological aspects of accelerators (magnets, RF cavities, cryogenics, power supply, vacuum, beam instrumentation, injection and extraction) are reviewed, as well as accelerator operation (parameter control, beam feedback system, orbit correction, luminosity optimization). After introducing the largest accelerators and colliders of their times the application of accelerators and storage rings in industry, medicine, basic science, and energy research is discussed, including also synchrotron radiation sources and spallation sources. Finally, cosmic accelerators and an outlook for the future are given.

Download or read book Fundamentals of Superconducting Nanoelectronics written by Anatoli Sidorenko and published by Springer Science & Business Media. This book was released on 2011-08-18 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates how the new phenomena in superconductivity on the nanometer scale (FFLO state, triplet superconductivity, Crossed Andreev Reflection, synchronized generation etc.) serve as the basis for the invention and development of novel nanoelectronic devices and systems. It demonstrates how rather complex ideas and theoretical models, like odd-pairing, non-uniform superconducting state, pi-shift etc., adequately describe the processes in real superconducting nanostructues and novel devices based on them. The book is useful for a broad audience of readers, researchers, engineers, PhD-students, lectures and others who would like to gain knowledge in the frontiers of superconductivity at the nanoscale.

Download or read book Quantum Computing in Solid State Systems written by Berardo Ruggiero and published by Springer Science & Business Media. This book was released on 2006-05-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum Computation in Solid State Systems discusses experimental implementation of quantum computing for information processing devices; in particular observations of quantum behavior in several solid state systems are presented. The complementary theoretical contributions provide models of minimizing decoherence in the different systems. Most recent theoretical and experimental results on macroscopic quantum coherence of mesoscopic systems, as well as the realization of solid-state qubits and quantum gates are discussed. Particular attention is given to coherence effects in Josephson devices. Other solid state systems---including quantum dots, optical, ion, and spin devices---are also discussed.

Download or read book High Sensitivity Magnetometers written by Asaf Grosz and published by Springer. This book was released on 2016-09-20 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers, for the first time, an overview of nearly all of the magnetic sensors that exist today. The book is offering the readers a thorough and comprehensive knowledge from basics to state-of-the-art and is therefore suitable for both beginners and experts. From the more common and popular AMR magnetometers and up to the recently developed NV center magnetometers, each chapter is describing a specific type of sensor and providing all the information that is necessary to understand the magnetometer behavior including theoretical background, noise model, materials, electronics, design and fabrication techniques, etc.

Download or read book An Assessment of the Prospects for Inertial Fusion Energy written by National Research Council and published by National Academies Press. This book was released on 2013-07-05 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.

Download or read book Microwave and RF Vacuum Electronic Power Sources written by Richard G. Carter and published by Cambridge University Press. This book was released on 2018-04-12 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get up-to-speed on the theory, principles and design of vacuum electron devices.

Download or read book Measurement and Control of Charged Particle Beams written by Michiko G. Minty and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "This book is a very welcome and valuable addition to the accelerator literature. As noted by the authors, there is relatively little material in the book specifically for low-energy machines, but industrial users may still find it useful to read." Cern Courier

Download or read book Particle Physics Reference Library written by Stephen Myers and published by Springer Nature. This book was released on 2020-01-01 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third open access volume of the handbook series deals with accelerator physics, design, technology and operations, as well as with beam optics, dynamics and diagnostics. A joint CERN-Springer initiative, the "Particle Physics Reference Library" provides revised and updated contributions based on previously published material in the well-known Landolt-Boernstein series on particle physics, accelerators and detectors (volumes 21A,B1,B2,C), which took stock of the field approximately one decade ago. Central to this new initiative is publication under full open access.

Download or read book A Dynamical Theory of the Electromagnetic Field written by James C. Maxwell and published by Wipf and Stock Publishers. This book was released on 1996-12-03 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: "We owe Clerk Maxwell the precise formulation of the space-time laws of electromagnetic fields. Imagine his own feelings when the partial differential equations he formulated spread in the form of polarized waves with the speed of light! This change in the understanding of the structure of reality is the most profound and fruitful that has come to physics since Newton."--Albert Einstein

Download or read book Handbook of Accelerator Physics and Engineering written by Alexander Wu Chao and published by World Scientific. This book was released on 2013 with total page 849 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by internationally recognized authorities in the field, this expanded and updated new edition of the bestselling Handbook, containing more than 100 new articles, is aimed at the design and operation of modern particle accelerators. It is intended as a vade mecum for professional engineers and physicists engaged in these subjects. With a collection of more than 2000 equations, 300 illustrations and 500 graphs and tables, here one will find, in addition to the common formulae of previous compilations, hard-to-find, specialized formulae, recipes and material data pooled from the lifetime experience of many of the world''s most able practitioners of the art and science of accelerators.The eight chapters include both theoretical and practical matters as well as an extensive glossary of accelerator types. Chapters on beam dynamics and electromagnetic and nuclear interactions deal with linear and nonlinear single particle and collective effects including spin motion, beam-environment, beam-beam, beam-electron, beam-ion and intrabeam interactions. The impedance concept and related calculations are dealt with at length as are the instabilities associated with the various interactions mentioned. A chapter on operational considerations includes discussions on the assessment and correction of orbit and optics errors, real-time feedbacks, generation of short photon pulses, bunch compression, tuning of normal and superconducting linacs, energy recovery linacs, free electron lasers, cooling, space-charge compensation, brightness of light sources, collider luminosity optimization and collision schemes. Chapters on mechanical and electrical considerations present material data and important aspects of component design including heat transfer and refrigeration. Hardware systems for particle sources, feedback systems, confinement and acceleration (both normal conducting and superconducting) receive detailed treatment in a subsystems chapter, beam measurement techniques and apparatus being treated therein as well. The closing chapter gives data and methods for radiation protection computations as well as much data on radiation damage to various materials and devices.A detailed name and subject index is provided together with reliable references to the literature where the most detailed information available on all subjects treated can be found.

Download or read book Introduction to Quantum Metrology written by Waldemar Nawrocki and published by Springer. This book was released on 2015-03-24 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of quantum effects used in metrology and results of the author’s own research in the field of quantum electronics. The book provides also quantum measurement standards used in many branches of metrology for electrical quantities, mass, length, time and frequency. This book represents the first comprehensive survey of quantum metrology problems. As a scientific survey, it propagates a new approach to metrology with more emphasis on its connection with physics. This is of importance for the constantly developing technologies and nanotechnologies in particular. Providing a presentation of practical applications of the effects used in quantum metrology for the construction of quantum standards and sensitive electronic components, the book is useful for a wide audience of physicists and metrologists in the broad sense of both terms. In 2014 a new system of units, the so called Quantum SI, is introduced. This book helps to understand and approve the new system to both technology and academic community.

Download or read book Status of Accelerator Driven Systems Research and Technology Development written by International Atomic Energy Agency and published by IAEA Tecdoc. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.