Download or read book Strength and Stiffness of Reinforced Yellow poplar Glued laminated Beams written by and published by . This book was released on 1997 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: In bridge applications, it is often necessary to minimize the depth of the bridge structure to provide for the required hydraulic opening or reduce the volume of approach fill. For bridges that utilize structural glued-laminated (glulam) timber beams as stringers, reinforcement using thin strips of pultruded E-glass-fiber-reinforced plastic (GFRP) composites may permit reduced depth, because the reinforcement has the potential to increase stiffness and strength. This study is part of an overall effort aimed at evaluating the potential for commercial production of glulam-GFRP beams in current wood laminating plants and a wood adhesive compatible with existing equipment. Twelve Yellow-Poplar glulam GFRP beams were commercially manufactured, and their performance was evaluated. The GFRP panels were bonded to the wood with a resorcinol formaldehyde adhesive to provide the reinforcement. The simplicity of the process used to manufacture the test beams indicates that the commercial production of glulam-GFRP beams is feasible. Increases of 18 percent in stiffness and 26 percent in strength were achieved by adding 3 percent of GFRP by volume. The bending strength values of the beams predicted by the ASTM D3737 procedure correlate well with the experimental values. However, the observed delamination of the reinforcement indicates that improved bonding strength of wood--GFRP interfaces is needed. Results of this study will be useful to manufacturers interested in improving the performance of glulam timber beams.
Download or read book Research Paper FPL RP written by and published by . This book was released on 1986 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Efficient Utilization of Red Maple Lumber in Glued laminated Timber Beams written by John J. Janowiak and published by . This book was released on 1995 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glued-laminated (glulam) timber. Two red maple beam combinations were evaluated: (1) a glulam combination designed with E-rated lumber in 25 percent of the outer laminations (top and bottom) and No. 3 grade lumber in 50 percent of the center laminations and (2) a wide-width glulam combination with laminations made from nominal 2- by 4- and 2- by 6-in. No. 2 grade lumber laid edge-to-edge having staggered end joints (termed 2 by 4/2 by 6 glulam combination). Test results of 42 red maple glulam beams showed that it was feasible to develop structural glulam timber from cant-sawn lumber. The glulam combinations made from E-rated lumber exceeded the target design bending stress of 2,400 lb/in2 and met the target modulus of elasticity (MOE) of 1.8 Ã 106 lb/in2. In addition, the 2 by 4/2 by 6 glulam combination exceeded published design stresses for vertically laminated bending strength, MOE in both the horizontally and vertically laminated orientations, and horizontal shear stress in the vertically laminated orientation. Based on the results of the 2 by 4/2 by 6 glulam combination, it was determined that edge gluing the laminations to form wide-width lumber is not required to achieve targeted strength and stiffness levels. Data analysis showed that ASTM D3737 procedures developed for softwood species accurately predict beam stiffness and provide conservative bending and horizontal shear strength estimates for red maple glulam beams. Also, it was shown that results from ASTM D143 shear-block tests could be used to accurately predict horizontal shear strength of 2 by 4 and 2 by 6 red maple glulam beams.
Download or read book Bibliography of Agriculture written by and published by . This book was released on 1998 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Agricultural Biomass Based Potential Materials written by Khalid Rehman Hakeem and published by Springer. This book was released on 2015-04-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural biomass is abundant worldwide and it can be considered as alternative source of renewable and sustainable materials which can be used as potential materials for different applications. Despite this enormous production of agricultural biomass, only a small fraction of the total biomass is utilized for different applications. Industry must be prepared to take advantage of the situation and utilize the available biomass in the best possible manner. Agricultural biomass such as natural fibres has been successfully investigated as a great potential to be used as a renewable and sustainable materials for the production of composite materials. Natural fibres offer excellent specific properties and have potential as outstanding reinforcing fillers in the matrix and can be used as an alternative material for biocomposites, hybrid composites, pulp, and paper industries. Natural fibre based polymer composites made of jute, oil palm, flex, hemp, kenaf have a low market cost, attractive with respect to global sustainability and find increasing commercial use in different applications. Agricultural biomass based composites find applications in a number of fields viz., automotive industry and construction industry. Future research on agricultural biomass-natural fibre based composites should not only be limited to its automotive applications but can be explored for its application in aircraft components, construction industry, rural housing and biomedical applications. In this book we will cover the chemical, physical, thermal, electrical, and biodegradability properties of agricultural biomass based composite materials and its different potential applications. The main goal of this volume is to familiarize researchers, scientists and engineers with the unique research opportunities and potentials of agricultural biomass based materials. Up-to-date information on alternative biomass utilization Academic and industry leaders discuss unique properties of biomass based composite materials Direct application of agricultural biomass materials as sustainable and renewable alternatives
Download or read book Phenolic Resins A Century of Progress written by Louis Pilato and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The legacy of Leo Hendrik Baekeland and his development of phenol formal- hyde resins are recognized as the cornerstone of the Plastics Industry in the early twentieth century, and phenolic resins continue to ?ourish after a century of robust growth. On July 13, 1907, Baekeland ?led his “heat and pressure” patent related to the processing of phenol formaldehyde resins and identi?ed their unique utility in a plethora of applications. The year 2010 marks the Centennial Year of the prod- tion of phenolic resins by Leo Baekeland. In 1910, Baekeland formed Bakelite GmbH and launched the manufacture of phenolic resins in Erkner in May 1910. In October 1910, General Bakelite began producing resins in Perth Amboy, New Jersey. Lastly, Baekeland collaborated with Dr. Takamine to manufacture phenolic resins in Japan in 1911. These events were instrumental in establishing the Plastics Industry and in tracing the identity to the brilliance of Dr. Leo Baekeland. Phenolic resins remain as a versatile resin system featuring either a stable, thermoplastic novolak composition that cures with a latent source of formaldehyde (hexa) or a heat reactive and perishable resole composition that cures thermally or under acidic or special basic conditions. Phenolic resins are a very large volume resin system with a worldwide volume in excess of 5 million tons/year, and its growth is related to the gross national product (GNP) growth rate globally.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book Agrindex written by and published by . This book was released on 1995 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Humanizing Digital Reality written by Klaas De Rycke and published by Springer. This book was released on 2017-09-15 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at finding some answers to the questions: What is the influence of humans in controlling CAD and how much is human in control of its surroundings? How far does our reach as humans really go? Do the complex algorithms that we use for city planning nowadays live up to their expectations and do they offer enough quality? How much data do we have and can we control? Are today’s inventions reversing the humanly controlled algorithms into a space where humans are controlled by the algorithms? Are processing power, robots for the digital environment and construction in particular not only there to rediscover what we already knew and know or do they really bring us further into the fields of constructing and architecture? The chapter authors were invited speakers at the 6th Symposium "Design Modelling Symposium: Humanizing Digital Reality", which took place in Ensa-Versailles, France from 16 - 20 September 2017.
Download or read book Performance of Bio based Building Materials written by Dennis Jones and published by Woodhead Publishing. This book was released on 2017-07-07 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance of Bio-based Building Materials provides guidance on the use of bio-based building materials (BBBM) with respect to their performance. The book focuses on BBBM currently present on the European market. The state-of-the-art is presented regarding material properties, recommended uses, performance expectancies, testing methodology, and related standards. Chapters cover both 'old and traditional' BBBM since quite a few of them are experiencing a comeback on the market. Promising developments that could become commercial in the near future are presented as well. The book will be a valuable reference resource for those working in the bio-based materials research community, architects and agencies dealing with sustainable construction, and graduate students in civil engineering. - Takes a unique approach to bio-based materials and presents a broad overview of the topics on relevant areas necessary for application and promotion in construction - Contains a general description, notable properties related to performance, and applications - Presents standards that are structured according to performance types
Download or read book Durability of Composites for Civil Structural Applications written by Institute of Materials, Minerals, and Mining and published by Woodhead Publishing. This book was released on 2007-07-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practising engineers, decision makers and students with a useful and fundamental guide to the use of FRP composites within civil and structural engineering. A P Mouritz, RMIT, Australia.
Download or read book Strengthening and Rehabilitation of Civil Infrastructures Using Fibre Reinforced Polymer FRP Composites written by L C Hollaway and published by Elsevier. This book was released on 2008-07-18 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: The repair of deteriorated, damaged and substandard civil infrastructures has become one of the most important issues for the civil engineer worldwide. This important book discusses the use of externally-bonded fibre-reinforced polymer (FRP) composites to strengthen, rehabilitate and retrofit civil engineering structures, covering such aspects as material behaviour, structural design and quality assurance.The first three chapters of the book review structurally-deficient civil engineering infrastructure, including concrete, metallic, masonry and timber structures. FRP composites used in rehabilitation and surface preparation of the component materials are also reviewed. The next four chapters deal with the design of FRP systems for the flexural and shear strengthening of reinforced concrete (RC) beams and the strengthening of RC columns. The following two chapters examine the strengthening of metallic and masonry structures with FRP composites. The last four chapters of the book are devoted to practical considerations in the flexural strengthening of beams with unstressed and prestressed FRP plates, durability of externally bonded FRP composite systems, quality assurance and control, maintenance, repair, and case studies.With its distinguished editors and international team of contributors, Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer (FRP) composites is a valuable reference guide for engineers, scientists and technical personnel in civil and structural engineering working on the rehabilitation and strengthening of the civil infrastructure. - Reviews the use of fibre-reinforced polymer (FRP) composites in structurally damaged and sub-standard civil engineering structures - Examines the role and benefits of fibre-reinforced polymer (FRP) composites in different types of structures such as masonry and metallic strengthening - Covers practical considerations including material behaviour, structural design and quality assurance
Download or read book Textile Fibre Composites in Civil Engineering written by Thanasis Triantafillou and published by Woodhead Publishing. This book was released on 2016-02-08 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile Fibre Composites in Civil Engineering provides a state-of-the-art review from leading experts on recent developments, the use of textile fiber composites in civil engineering, and a focus on both new and existing structures. Textile-based composites are new materials for civil engineers. Recent developments have demonstrated their potential in the prefabrication of concrete structures and as a tool for both strengthening and seismic retrofitting of existing concrete and masonry structures, including those of a historical value. The book reviews materials, production technologies, fundamental properties, testing, design aspects, applications, and directions for future research and developments. Following the opening introductory chapter, Part One covers materials, production technologies, and the manufacturing of textile fiber composites for structural and civil engineering. Part Two moves on to review testing, mechanical behavior, and durability aspects of textile fiber composites used in structural and civil engineering. Chapters here cover topics such as the durability of structural elements and bond aspects in textile fiber composites. Part Three analyzes the structural behavior and design of textile reinforced concrete. This section includes a number of case studies providing thorough coverage of the topic. The final section of the volume details the strengthening and seismic retrofitting of existing structures. Chapters investigate concrete and masonry structures, in addition to providing information and insights on future directions in the field. The book is a key volume for researchers, academics, practitioners, and students working in civil and structural engineering and those working with advanced construction materials. - Details the range of materials and production technologies used in textile fiber composites - Analyzes the durability of textile fiber composites, including case studies into the structural behavior of textile reinforced concrete - Reviews the processes involved in strengthening existing concrete structures
Download or read book Selection of Polymeric Materials written by E. Alfredo Campo and published by William Andrew. This book was released on 2008-03-06 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today engineers, designers, buyers and all those who have to work with plastics face a dilemma. There has been a proliferation of test methods by which plastic properties are measured. The property data measured by these test methods are not identical and sometimes have large differences. How are engineers, designers, buyers going to decide the type and resin grade and their property data? Which are the valid test methods? The right plastic property data are the difference between success and failure of a design, thus making the property selection process critical. For the first time this book provides a simple and efficient approach to a highly complex and time consuming task. There are over 26,000 different grades of polymers and millions of parts and applications, further adding to the difficulty of the selection process.Selection of Polymeric Materials steers engineers and designers onto the right path to selecting the appropriate values for each plastic property. A large amount of property information has been provided to teach and assist the plastic part designer and others in selecting the right resin and properties for an application. Various standards including ASTM, ISO, UL, and British Specifications have been discussed to help the readers in making sound decisions - A simple and efficient approach to a highly complex and time consuming task - Allows engineers to select from various standards including ASTM, ISO, UL, and British Specification - Presents information on properties such as tensile strength, melt temperature, continuous service temperature, moisture exposure, specific gravity and flammability ratings - Tried and true values narrow myriad choices down quickly for readers
Download or read book The Australian Official Journal of Trademarks written by and published by . This book was released on 1906 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Timber written by J.M. Dinwoodie and published by CRC Press. This book was released on 2000-03-09 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber: Its Nature and Behaviour adopts a materials science approach to timber and comprehensively examines the relationship between the performance of timber and its structure. This book explains a wide range of timbers physical and mechanical behaviour (including processing) in terms of its basic structure and its complex interaction with moisture. The performance of timber and panel products is also related to the levels set in new European specifications and with the associated methods of testing.
Download or read book Phenolic Resins written by A. Gardziella and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vastly expanded 2nd edition contains all the new developments since 1985. It describes significant new phenolic resin chemistry, new applications with up-to-date developments, and includes detailed standardized test methods important for ISO 9001 ff certification.
