Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.

Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.

Download or read book Materials for the Direct Restoration of Teeth written by John Nicholson and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for the Direct Restoration of Teeth focuses on the important role teeth play in our lives and how biomaterials scientists are ensuring that new dental materials are functional and esthetic. As research in the field is shifting away from traditional materials like metal, and towards more advanced materials, such as resins and ceramics, this book on the subject of modern materials for the direct repair of teeth provides readers with a comprehensive reference. The most pertinent modern dental materials and their properties and applications for the direct restoration of teeth are presented, along with case examples and guidance notes making this book an essential companion for materials scientists and clinicians. - Provides comprehensive coverage of conventional and modern materials for direct restoration of teeth - Includes guidance notes and case examples to support dental clinicians in decision-making - Authored by a scientist and a clinician, the book provides a balanced and complete treatise of the subject

Download or read book Nanostructures And Nanomaterials Synthesis Properties And Applications 2nd Edition written by Guozhong Cao and published by World Scientific Publishing Company. This book was released on 2011-01-03 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 2nd edition of the original “Nanostructures and Nanomaterials” written by Guozhong Cao and published by Imperial College Press in 2004.This important book focuses not only on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.

Download or read book Oral Biofilms and Modern Dental Materials written by Andrei Cristian Ionescu and published by Springer Nature. This book was released on 2021-04-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an up-to-date perspective on oral biofilms and dental materials, equipping readers with a sound understanding of their mutual interactions. Experts from across the world comprehensively describe the main strategies that can be followed when designing modern bioactive and biomimetic dental materials, bearing in mind the goal of reducing the occurrence of pathological conditions such as secondary caries and peri-implantitis. The background to the book is the rapid expansion in the use of nanotechnologies and modern techniques to achieve levels of performance of dental materials that were unthinkable even a few years ago. Whereas conventionally dental materials have been regarded as inert, an important paradigm shift is underway: now, these materials are being conceived as bioactive and biomimetic. Modern dental materials can produce a response by interacting positively both with the host and with the biofilm permanently colonizing hard and soft tissues of the oral cavity. These materials increasingly mimic the behavior of the tissues that they are replacing. In documenting the latest knowledge in the field, this book will be of value for both scientists in the fields of nanotechnology, biofilms and dental materials and interested clinicians.

Download or read book Biocompatibility of Dental Materials written by Gottfried Schmalz and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and scientifically based overview of the biocompatibility of dental materials. Up-to-date concepts of biocompatibility assessment are presented, as well as information on almost all material groups used in daily dentistry practice. Furthermore, special topics of clinical relevance (e.g,, environmental and occupational hazards and the diagnosis of adverse effects) are covered. The book will: improve the reader’s ability to critically analyze information provided by manufacturers supply a better understanding of the biocompatibility of single material groups, which will help the reader choose the most appropriate materials for any given patient and thus prevent adverse effects from developing provide insights on how to conduct objective, matter-of-fact discussions with patients about the materials to be used in dental procedures advise readers, through the use of well-documented concepts, on how to treat patients who claim adverse effects from dental materials feature clinical photographs that will serve as a reference when analyzing clinical symptoms, such as oral mucosa reactions.

Download or read book Phillips Science of Dental Materials written by Kenneth J. Anusavice, DMD, PhD and published by Elsevier Health Sciences. This book was released on 2012-09-27 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the most up-to-date information on materials used in the dental office and laboratory today. Emphasizing practical, clinical use, as well as the physical, chemical, and biological properties of materials, this leading reference helps you stay current in this very important area of dentistry. This new full-color edition also features an extensive collection of new clinical photographs to better illustrate the topics and concepts discussed in each chapter. Organization of chapters and content into four parts (General Classes and Properties of Dental Materials; Auxiliary Dental Materials; Direct Restorative Materials; and Indirect Restorative Materials) presents the material in a logical and effective way for better comprehension and readability. Balance between materials science and manipulation bridges the gap of knowledge between dentists and lab technicians. Major emphasis on biocompatibility serves as a useful guide for clinicians and educators on material safety. Distinguished contributor pool lends credibility and experience to each topic discussed. Critical thinking questions appearing in boxes throughout each chapter stimulate thinking and encourage classroom discussion of key concepts and principles. Key terms presented at the beginning of each chapter helps familiarize readers with key terms so you may better comprehend text material. NEW! Full color illustrations and line art throughout the book make text material more clear and vivid. NEW! Chapter on Emerging Technologies keeps you up to date on the latest materials in use. NEW! Larger trim size allows the text to have fewer pages and makes the content easier to read.

Download or read book Advances in Ceramic Matrix Composites written by I M Low and published by Woodhead Publishing. This book was released on 2018-01-20 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. - Provides detailed coverage of parts and processing, properties and applications - Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) - Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs

Download or read book RESIN BASED MATERIALS written by Dr. Cheena bansal and published by Anchor Academic Publishing (aap_verlag). This book was released on 2015-06-30 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION Esthetic dentistry can be defined as the art and science of dentistry, applied to create or enhance beauty of an individual within functional and physiological limits. Where as cosmetic dentistry is application of the principles of esthetics and certain illusionary principles, performed to signify or enhance beauty of an individual to suit the role he has to play in his day to day life or otherwise. Appearance is closely linked to social acceptance and professional success. No longer are people satisfied with just looking good, it must be coupled with a complete feeling of total well-being. Newer technologies are being harnessed for this purpose and advanced research is being undertaken. Thus, focus of dentistry in the present times is not only on prevention and treatment of disease but also on meeting the demands for better esthetics. Newer dental materials developed for esthetic enhancement are now chosen for their excellent mechanical as well as esthetic qualities. Esthetic dentistry is emerging as one of the most progressive and challenging branches of this field. Thus dentistry has evolved from a curative to a creative science in a very short span. The modern history of esthetic restorative materials was started with silicate cement, introduced by Fletcher in 1878, the principle anterior restorative material of those days. But, silicate cements were discouraged later on because of their poor strength, irritation to pulp tissue and brittleness. Even the nature of its setting and structure were but imperfectly understood. Self curing acrylic resin was introduced to the dental profession in the mid- 1950s. Initially used for the construction of denture bases, acrylic resin has also been used for many other purposes, including denture teeth, temporary restorations, intraoral splints and veneering agents for crowns and bridges. Since their introduction, acrylic based materials have continued to play a major role in restorative and prosthetic dentistry. But they too showed poor physical properties like high polymerization, shrinkage and coefficient of thermal expansion, irritation to pulp and dimensional instability. In attempt to improve their properties, and the potential for greater application of resins came about with the introduction of the bisphenol A and glycidyl methacrylate, or BIS-GMA, system by R Bowen in the early 1960s .

Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.

Download or read book Bio Based Epoxy Polymers Blends and Composites written by Jyotishkumar Parameswaranpillai and published by John Wiley & Sons. This book was released on 2021-04-26 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art overview on bioepoxy polymers as well as their blends and composites -- covering all aspects from fundamentals to applications! Bioepoxy polymers is an emerging area and have attracted more and more attention due to their biodegradability and good thermo-mechanical performance. In recent years, research progress has been made in synthesis, processing, characterization, and applications of bioepoxy blends and composites. Bioepoxy polymers are very promising candidates to replace the traditional thermosetting nonbiodegradable polymers. Bio-Based Epoxy Polymers, Blends and Composites summaries recent research progress on bioepoxy polymers as well as their blends and composites. It covers aspects from synthesis, processing, various characterization techniques to broad spectrum of applications. It provides a correlation of physical properties with macro, micro and nanostructures of the materials. Moreover, research trends, future directions, and opportunities are also discussed. Attracts attention: Bioepoxy polymers are environmentally friendly and considered as a promising candidate to replace the traditional thermosetting nonbiodegradable polymers Highly application-oriented: Bioepoxy polymers can be used in a broad range of applications such as polymer foams, construction, aerospace, automobiles, self-healing systems One-stop reference: Covers all aspects of bioepoxy polymer, their blends and composites, such as synthesis, properties, processing, characterization and applications Broad audience: Attracts attention from both academia and industry

Download or read book Applied Dental Materials written by John F. McCabe and published by Wiley-Blackwell. This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Phenolic Polymers Based Composite Materials written by Mohammad Jawaid and published by Springer Nature. This book was released on 2020-11-09 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains recent research on phenolic resin and its composite materials. The book covers all types of wood composites, natural fibres and synthetic fibres reinforced composites. It discusses various properties of phenolic composites and presents comparative study with other polymer composites for prospective applications. The chapters in the book present an up-to-date information on the subject area of polymer and composite-based information by prominent researchers in academia and industry as well as government/private research laboratories across the world. The book serves as a holistic reference source for university and college faculties, professionals, postdoctoral research fellows, undergraduate/graduate students, and research and science officers working in the area of polymer science, non-forest products utilization, natural fibres and biomass materials.

Download or read book Dental Materials at a Glance written by J. Anthony von Fraunhofer and published by John Wiley & Sons. This book was released on 2013-05-31 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dental Materials at a Glance, 2nd edition, is the latest title in the highly popular At a Glance series, providing a concise and accessible introduction and revision aid. Following the familiar, easy-to-use at a Glance format, each topic is presented as a double-page spread with key facts accompanied by clear diagrams encapsulating essential information. Systematically organized and succinctly delivered, Dental Materials at a Glance covers: Each major class of dental material and biomaterial Basic chemical and physical properties Clinical handling and application Complications and adverse effects of materials Dental Materials at a Glance is the ideal companion for all students of dentistry, residents, and junior clinicians. In addition, the text will provide valuable insight for general dental practitioners wanting to update their materials knowledge and be of immediate application for dental hygienists, dental nurses, dental assistants, and technicians.

Download or read book Advanced Dental Biomaterials written by Zohaib Khurshid and published by Woodhead Publishing. This book was released on 2019-05-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Dental Biomaterials is an invaluable reference for researchers and clinicians within the biomedical industry and academia. The book can be used by both an experienced researcher/clinician learning about other biomaterials or applications that may be applicable to their current research or as a guide for a new entrant into the field who needs to gain an understanding of the primary challenges, opportunities, most relevant biomaterials, and key applications in dentistry. - Provides a comprehensive review of the materials science, engineering principles and recent advances in dental biomaterials - Reviews the fundamentals of dental biomaterials and examines advanced materials' applications for tissues regeneration and clinical dentistry - Written by an international collaborative team of materials scientists, biomedical engineers, oral biologists and dental clinicians in order to provide a balanced perspective on the field

Download or read book Developing Bioactive Materials for Dental Applications written by Mary Anne Sampaio Melo and published by Frontiers Media SA. This book was released on 2021-10-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Curing in Polymer Science and Technology Photoinitiating systems written by Jean-Pierre Fouassier and published by Elsevier Science & Technology. This book was released on 1993 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this four-volume, multi-author reference work is to provide a comprehensive guide to the radiation curing field. Volume Two is devoted to the chemistry of photoinitiators, presenting and discussing basic concepts and the reactivity of typical systems.