Download or read book Dental Composite Materials for Direct Restorations written by Vesna Miletic and published by Springer. This book was released on 2017-11-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both basic scientific and clinically relevant aspects of dental composite materials with a view to meeting the needs of researchers and practitioners. Following an introduction on their development, the composition of contemporary composites is analyzed. A chapter on polymerization explains the setting reactions and light sources available for light-cured composites. The quality of monomer-to-polymer conversion is a key factor for material properties. Polymerization shrinkage along with the associated stress remains among the most challenging issues regarding composite restorations. A new classification of dental composites is proposed to offer more clinically relevant ways of differentiating between commercially available materials. A review of specific types of composites provides an insight into their key issues. The potential biological issues of dental composites are reviewed in chapters on elution of leachable substances and cariogenicity of resin monomers. Clinical sections focus on material placement, finishing procedures, and the esthetics and clinical longevity of composite restorations. Bonding to tooth tissues is addressed in a separate chapter, as is the efficiency of various composite repair methods. The final chapter discusses future perspectives on dental composite materials.

Download or read book Handbook of Bioceramics and Biocomposites written by Iulian Vasile Antoniac and published by Springer. This book was released on 2016-05-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook describes several current trends in the development of bioceramics and biocomposites for clinical use in the repair, remodelling, and regeneration of bone tissue. Comprehensive coverage of these materials allows fundamental aspects of the science and engineering to be seen in close relation to the clinical performance of dental and orthopaedic implants. Bioceramics and biocomposites appear to be the most dynamic area of materials development for both tissue engineering and implantable medical devices. Almost all medical specialties will continue to benefit from these developments, but especially dentistry and orthopaedics. In this Handbook, leading researchers describe the use of bionanomaterials to create new functionalities when interfaced with biological molecules or structures. Also described are technologies for bioceramics and biocomposites processing in order to fabricate medical devices for clinical use. Another important section of the book is dedicated to tissue regeneration with development of new matrices. A targeted or personalized treatment device reduces drug consumption and treatment expenses, resulting in benefits to the patient and cost reductions for public health systems. This authoritative reference on the state-of-the-art in the development and use of bioceramics and biocomposites can also serve as the basis of instructional course lectures for audiences ranging from advanced undergraduate students to post-graduates in materials science and engineering and biomedical engineering.

Download or read book Materials for the Direct Restoration of Teeth written by John Nicholson and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for the Direct Restoration of Teeth focuses on the important role teeth play in our lives and how biomaterials scientists are ensuring that new dental materials are functional and esthetic. As research in the field is shifting away from traditional materials like metal, and towards more advanced materials, such as resins and ceramics, this book on the subject of modern materials for the direct repair of teeth provides readers with a comprehensive reference. The most pertinent modern dental materials and their properties and applications for the direct restoration of teeth are presented, along with case examples and guidance notes making this book an essential companion for materials scientists and clinicians. - Provides comprehensive coverage of conventional and modern materials for direct restoration of teeth - Includes guidance notes and case examples to support dental clinicians in decision-making - Authored by a scientist and a clinician, the book provides a balanced and complete treatise of the subject

Download or read book RESIN BASED MATERIALS written by Dr. Cheena bansal and published by Anchor Academic Publishing (aap_verlag). This book was released on 2015-06-30 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION Esthetic dentistry can be defined as the art and science of dentistry, applied to create or enhance beauty of an individual within functional and physiological limits. Where as cosmetic dentistry is application of the principles of esthetics and certain illusionary principles, performed to signify or enhance beauty of an individual to suit the role he has to play in his day to day life or otherwise. Appearance is closely linked to social acceptance and professional success. No longer are people satisfied with just looking good, it must be coupled with a complete feeling of total well-being. Newer technologies are being harnessed for this purpose and advanced research is being undertaken. Thus, focus of dentistry in the present times is not only on prevention and treatment of disease but also on meeting the demands for better esthetics. Newer dental materials developed for esthetic enhancement are now chosen for their excellent mechanical as well as esthetic qualities. Esthetic dentistry is emerging as one of the most progressive and challenging branches of this field. Thus dentistry has evolved from a curative to a creative science in a very short span. The modern history of esthetic restorative materials was started with silicate cement, introduced by Fletcher in 1878, the principle anterior restorative material of those days. But, silicate cements were discouraged later on because of their poor strength, irritation to pulp tissue and brittleness. Even the nature of its setting and structure were but imperfectly understood. Self curing acrylic resin was introduced to the dental profession in the mid- 1950s. Initially used for the construction of denture bases, acrylic resin has also been used for many other purposes, including denture teeth, temporary restorations, intraoral splints and veneering agents for crowns and bridges. Since their introduction, acrylic based materials have continued to play a major role in restorative and prosthetic dentistry. But they too showed poor physical properties like high polymerization, shrinkage and coefficient of thermal expansion, irritation to pulp and dimensional instability. In attempt to improve their properties, and the potential for greater application of resins came about with the introduction of the bisphenol A and glycidyl methacrylate, or BIS-GMA, system by R Bowen in the early 1960s .

Download or read book Craig s Restorative Dental Materials written by John M. Powers and published by Mosby. This book was released on 2006 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a comprehensive exploration of restorative dental materials, this book provides the information readers need to know to correctly use dental materials in the clinic and dental laboratory. Ranging from fundamental concepts to advanced skills, it also provides the scientific basis for technical procedures and manipulation of materials.

Download or read book Advanced Dental Biomaterials written by Zohaib Khurshid and published by Woodhead Publishing. This book was released on 2019-05-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Dental Biomaterials is an invaluable reference for researchers and clinicians within the biomedical industry and academia. The book can be used by both an experienced researcher/clinician learning about other biomaterials or applications that may be applicable to their current research or as a guide for a new entrant into the field who needs to gain an understanding of the primary challenges, opportunities, most relevant biomaterials, and key applications in dentistry. - Provides a comprehensive review of the materials science, engineering principles and recent advances in dental biomaterials - Reviews the fundamentals of dental biomaterials and examines advanced materials' applications for tissues regeneration and clinical dentistry - Written by an international collaborative team of materials scientists, biomedical engineers, oral biologists and dental clinicians in order to provide a balanced perspective on the field

Download or read book Advances in Industrial and Production Engineering written by Kripa Shanker and published by Springer. This book was released on 2019-04-23 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018). The book discusses different topics of industrial and production engineering such as sustainable manufacturing systems, computer-aided engineering, rapid prototyping, manufacturing management and automation, metrology, manufacturing process optimization, casting, welding, machining, and machine tools. The contents of this book will be useful for researchers as well as professionals.

Download or read book Phillips Science of Dental Materials written by Kenneth J. Anusavice, DMD, PhD and published by Elsevier Health Sciences. This book was released on 2012-09-27 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the most up-to-date information on materials used in the dental office and laboratory today. Emphasizing practical, clinical use, as well as the physical, chemical, and biological properties of materials, this leading reference helps you stay current in this very important area of dentistry. This new full-color edition also features an extensive collection of new clinical photographs to better illustrate the topics and concepts discussed in each chapter. Organization of chapters and content into four parts (General Classes and Properties of Dental Materials; Auxiliary Dental Materials; Direct Restorative Materials; and Indirect Restorative Materials) presents the material in a logical and effective way for better comprehension and readability. Balance between materials science and manipulation bridges the gap of knowledge between dentists and lab technicians. Major emphasis on biocompatibility serves as a useful guide for clinicians and educators on material safety. Distinguished contributor pool lends credibility and experience to each topic discussed. Critical thinking questions appearing in boxes throughout each chapter stimulate thinking and encourage classroom discussion of key concepts and principles. Key terms presented at the beginning of each chapter helps familiarize readers with key terms so you may better comprehend text material. NEW! Full color illustrations and line art throughout the book make text material more clear and vivid. NEW! Chapter on Emerging Technologies keeps you up to date on the latest materials in use. NEW! Larger trim size allows the text to have fewer pages and makes the content easier to read.

Download or read book Handbook of Clinical Techniques in Pediatric Dentistry written by Jane A. Soxman and published by John Wiley & Sons. This book was released on 2016-05-03 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clinical Techniques in Pediatric Dentistry provides the clinician with an increased level of expertise and skills for timely identification and intervention for various presentations in the developing dentition. It also clearly describes procedures for treatment in the primary and young permanent dentitions, including pulp therapy for primary and young permanent molars, extractions, space maintenance, and more. The most commonly encountered treatment needs are discussed with the goal of increasing clinician and staff confidence while decreasing chair-time and stress. With an emphasis on practical instruction, The Handbook of Clinical Techniques in Pediatric Dentistry is ideal for pediatric and general dentists, pediatric residents, and dental students taking clinical pediatric courses.

Download or read book Radiation Curing in Polymer Science and Technology Photoinitiating systems written by Jean-Pierre Fouassier and published by Elsevier Science & Technology. This book was released on 1993 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this four-volume, multi-author reference work is to provide a comprehensive guide to the radiation curing field. Volume Two is devoted to the chemistry of photoinitiators, presenting and discussing basic concepts and the reactivity of typical systems.

Download or read book Tooth colored Restoratives written by Harry F. Albers and published by PMPH-USA. This book was released on 2002 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the nature, benefits, and limitations of resins and ionomers. Products are classified by material type and clarified as to their use. Text is supported by more than 700 dentists' involvement in study group evaluations of techniques and results. CD-ROM includes complete text and illustrations in fully searchable PDF files. Previous edition: c1998.

Download or read book International Conference on Advancements of Medicine and Health Care through Technology 12th 15th October 2016 Cluj Napoca Romania written by Simona Vlad and published by Springer. This book was released on 2017-03-15 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the contributions of the fifth International Conference on Advancements of Medicine and Health Care through Technology (Meditech 2016), held in in Cluj-Napoka, Romania. The papers of this Proceedings volume present new developments in - Health Care Technology, - Medical Devices, Measurement and Instrumentation, - Medical Imaging, Image and Signal Processing, - Modeling and Simulation, - Molecular Bioengineering, - Biomechanics.

Download or read book Biocompatibility of Dental Materials written by Gottfried Schmalz and published by Springer Science & Business Media. This book was released on 2008-10-10 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive and scientifically based overview of the biocompatibility of dental materials. Up-to-date concepts of biocompatibility assessment are presented, as well as information on almost all material groups used in daily dentistry practice. Furthermore, special topics of clinical relevance (e.g,, environmental and occupational hazards and the diagnosis of adverse effects) are covered. The book will: improve the reader’s ability to critically analyze information provided by manufacturers supply a better understanding of the biocompatibility of single material groups, which will help the reader choose the most appropriate materials for any given patient and thus prevent adverse effects from developing provide insights on how to conduct objective, matter-of-fact discussions with patients about the materials to be used in dental procedures advise readers, through the use of well-documented concepts, on how to treat patients who claim adverse effects from dental materials feature clinical photographs that will serve as a reference when analyzing clinical symptoms, such as oral mucosa reactions.

Download or read book Applied Dental Materials written by John F. McCabe and published by Wiley-Blackwell. This book was released on 1990 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ronald E Goldstein s Esthetics in Dentistry written by Ronald E. Goldstein and published by John Wiley & Sons. This book was released on 2018-08-07 with total page 1517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die dritte Auflage von Ronald E. Goldstein`s Esthetics in Dentistry stellt eine gründliche Aktualisierung und Erweiterung dieses maßgeblichen Referenzwerks dar. Behandelt werden sämtliche Aspekte der ästhetischen und kosmetischen Zahnheilkunde, von den Prinzipien und Behandlungsverfahren bis hin zu spezifischen Herausforderungen und Komplikationen. - Untersucht umfassend sämtliche Aspekte der ästhetischen und kosmetischen Zahnheilkunde. - Enthält 23 neue Kapitel internationaler Experten des Fachgebiets, vorhandene Kapitel wurde vollständig aktualisiert. - Mit mehr als 3700 hochwertigen Fotos und Illustrationen. - Präsentiert klinische Fallstudien und Behandlungsalgorithmen und macht dieses Buch für den Klinikalltag noch bedeutsamer. - Legt den Schwerpunkt auf klinische Szenarien. Alle Informationen sind umfassend wissenschaftlich belegt.

Download or read book Dental Composites written by Frederick C. Calhoun and published by Nova Science Pub Incorporated. This book was released on 2011 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dental composite resins are types of synthetic resins which are used in dentistry as restorative material or adhesives. Synthetic resins evolved as restorative materials since they were insoluble, aesthetic, and insensitive to dehydration and were inexpensive. It is easy to manipulate them as well. This book presents current research in the study of dental composites, including dental composites with nano-scaled fillers; the mechanical properties of resin composite core materials; the design and development of novel urethane dimethacrylate monomers in dental compositions; and the development of low-shrinkage dental composites.

Download or read book Applications of Nanocomposite Materials in Dentistry written by Abdullah M. Asiri and published by Woodhead Publishing. This book was released on 2018-11-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanocomposite Materials in Dentistry presents the study and developments of nano-composite materials for dental applications. Special emphasis is given to the issues related to dental bone regeneration using various types of nano-composite materials, issues of dental failure, antibacterial properties and dental implants. Topics are systematically arranged so that layman can also understand the fundamentals and applications of dental nanocomposites. The book offers a powerful source of exploration on the preparation, characteristics and specific uses of composites in the fields of applied chemistry and medical sciences. - Offers an historical overview of composites materials and their dentistry applications - Outlines the role of nanocomposites and nanotechnology in dentistry - Discusses the properties of nanocomposites for dental grafting, implants and bone tissues