Download or read book Creep Shrinkage and Durability Mechanics of Concrete and Concrete Structures Two Volume Set written by Tada-aki Tanabe and published by CRC Press. This book was released on 2008-09-01 with total page 1540 pages. Available in PDF, EPUB and Kindle. Book excerpt: CREEP, SHRINKAGE AND DURABILITY MECHANICS OF CONCRETE AND CONCRETE STRUCTURES contains the keynote lectures, technical reports and contributed papers presented at the Eighth International Conference on Creep, Shrinkage and Durability of Concrete and Concrete Structures (CONCREEP8, Ise-shima, Japan, 30 September - 2 October 2008). The topics covered

Download or read book Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete written by and published by . This book was released on 2008-01-01 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the 3rd International Conference on Sustainability in Civil Engineering written by Thanh Bui-Tien and published by Springer Nature. This book was released on 2021-04-27 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 3rd International Conference on Sustainability in Civil Engineering, ICSCE 2020, held on 26–27 November 2020, in Hanoi, Vietnam. It presents the expertise of scientists and engineers in academia and industry in the field of bridge and highway engineering, construction materials, environmental engineering, engineering in industry 4.0, geotechnical engineering, structural damage detection and health monitoring, structural engineering, geographic information system engineering, traffic, transportation and logistics engineering, water resources, estuary and coastal engineering.

Download or read book Proceedings of the 75th RILEM Annual Week 2021 written by J. Ivan Escalante-Garcia and published by Springer Nature. This book was released on 2023-03-10 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of sustainable construction materials and structures, as presented by leading international researchers and engineers at the 75th RILEM Annual Week (75RW 2021), held in Merida, Mexico on August 29 – September 3, 2021. It covers topics such as supplementary cementitious materials, durability and Life Cycle assessment in urban and marine conditions, additive manufacturing of concrete in construction, structural performance and design, non-Portland cements and Alkali activated cementitious materials and eco-concrete, cultural heritage, non-destructive testing techniques, bituminous materials, and construction materials (polymers, timber, bamboo, recycling and masonry). The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.

Download or read book Concrete and Masonry Movements written by Jeffrey Brooks and published by Butterworth-Heinemann. This book was released on 2014-08-23 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely used in the construction of bridges, dams and pavements, concrete and masonry are two of the world's most utilized construction materials. However, many engineers lack a proper understanding of the methods for predicting and mitigating their movements within a structure. Concrete and Masonry Movements provides practical methods for predicting and preventing movement in concrete and masonry, saving time and money in retrofitting and repair cost. With this book in hand, engineers will discover new prediction models for masonry such as: irreversible moisture expansion of clay bricks, elasticity, creep and shrinkage. In addition, the book provides up-to-date information on the codes of practice. - Provides mathematical modelling tools for predicting movement in masonry - Up-to-date knowledge of codes of practice methods - Clearly explains the factors influencing all types of concrete and masonry movement - Fully worked out examples and set problems are included at the end of each chapter

Download or read book Proceedings of the 26th Australasian Conference on the Mechanics of Structures and Materials written by Nawawi Chouw and published by Springer Nature. This book was released on with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Life Cycle of Structures and Infrastructure Systems written by Fabio Biondini and published by CRC Press. This book was released on 2023-06-28 with total page 6293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle of Structures and Infrastructure Systems contains the lectures and papers presented at IALCCE 2023- The Eighth International Symposium on Life-Cycle Civil Engineering, held at Politecnico di Milano, Milan, Italy, 2-6 July, 2023. This book contains the full papers of 514 contributions presented at IALCCE 2023, including the Fazlur R. Khan Plenary Lecture, nine Keynote Lectures, and 504 technical papers from 45 countries. The papers cover recent advances and cutting-edge research in the field of life-cycle civil engineering, including emerging concepts and innovative applications related to life-cycle design, assessment, inspection, monitoring, repair, maintenance, rehabilitation, and management of structures and infrastructure systems under uncertainty. Major topics covered include life-cycle safety, reliability, risk, resilience and sustainability, life-cycle damaging processes, life-cycle design and assessment, life-cycle inspection and monitoring, life-cycle maintenance and management, life-cycle performance of special structures, life-cycle cost of structures and infrastructure systems, and life-cycle-oriented computational tools, among others. This Open Access Book provides both an up-to-date overview of the field of life-cycle civil engineering and significant contributions to the process of making more rational decisions to mitigate the life-cycle risk and improve the life-cycle reliability, resilience, and sustainability of structures and infrastructure systems exposed to multiple natural and human-made hazards in a changing climate. It will serve as a valuable reference to all concerned with life-cycle of civil engineering systems, including students, researchers, practicioners, consultants, contractors, decision makers, and representatives of managing bodies and public authorities from all branches of civil engineering.

Download or read book Conference on Structural Implications of Shrinkage and Creep of Concrete at the ACI Fall 2007 Convention written by N. John Gardner and published by . This book was released on 2007 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Autogenous Shrinkage of Concrete written by Ei-ichi Tazawa and published by CRC Press. This book was released on 1999-01-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms the proceedings of a workshop held in Hiroshima in June 1998 and derive from the work of a Technical Committee of the Japan Concrete Institute. Topics include test and prediction methods, the science of autogenous shrinkage, strain and stress, and consequent design concerns.

Download or read book Tall buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2014-08-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 73: Tall Buildings is the result of a collaboration between the fib and MPA The Concrete Centre (UK). Task Group 1.6 High-rise buildings, within fib Commission 1: Structures, was drawn together with a mandate to write about the experience and know-how pertinent to the development, design and construction of tall concrete buildings. The group’s findings are presented in this state-of the-art report. Tall buildings are a unique challenge to engineers, even to those with extensive experience of low-rise structures. The bulletin explains the critical interfaces with other professionals, for example architects, building services engineers, façade and lift specialists, geotechnical engineers and wind specialists, highlighting how these parties interact with engineers and can influence and guide the development of the structural solution. The key factors in choosing the most appropriate structural system are discussed. The bulletin covers the criteria used to select the most economical structural elements including the foundations, the vertical elements and the floor slabs. Examples of common construction methods are presented and their effects on the structural engineering design are discussed. Tall buildings can undergo significant deformation during their construction and service life. These movements need to be understood by the designer and potentially compensated for in the design and during construction. One of the main particularities of the design of tall buildings is the dominance of the lateral loading from wind and seismic actions. The bulletin provides a discussion of these important topics and sets out the current approach taken by experienced engineers. Designers of tall buildings also need to understand the dynamic behaviour of the structure and confine the motion of the building to within acceptable limits. Approaches to damping and dynamic performance are discussed and guidance provided on the appropriate occupant comfort limits.

Download or read book Creep and Shrinkage of Concrete written by Z. P. Bažant and published by Spon Press. This book was released on 1993-01-01 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the proceedings of the 5th RILEM International Symposium, held in Barcelona in September 1993. The papers discuss creep and shrinkage of concrete, and should be of interest to cement and concrete technologists and researchers, as well as structural engineers.

Download or read book Design of Prestressed Concrete to AS3600 2009 written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2016-02-17 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concret

Download or read book 3rd fib Congress Washington USA written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2010-06-01 with total page 5718 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Prestressed Concrete to Eurocode 2 Second Edition written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2017-01-27 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.

Download or read book Self Compacting Concrete Materials Properties and Applications written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2019-11-19 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Compacting Concrete: Materials, Properties and Applications presents the latest research on various aspects of self-compacting concrete, including test methods, rheology, strength and durability properties, SCC properties at elevated temperature, SC manufacturing with the use of SCMs, recycled aggregates and industrial by-products. Written by an international group of contributors who are closely associated with the development of self-compacting concrete, the book explores the main differences between SCC and normal concrete in terms of raw materials, fresh properties and hardened properties. Other topics discussed include the structure and practical applications of fiber reinforced SCC. Researchers and experienced engineers will find this reference to be a systematic source to SCC with its accounting of the latest breakthroughs in the field and discussions of SCC constructability, structural integrity, improved flows into complex forms, and superior strength and durability. - Offers a systematic and comprehensive source of information on the latest developments in SCC technology - Includes mix design procedures, tests standards, rheology, strength and durability properties - Explores the properties and practical applications of SCC

Download or read book Design Production and Placement of Self Consolidating Concrete written by Kamal Henri Khayat and published by Springer Science & Business Media. This book was released on 2010-08-12 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear Colleagues, We are pleased to organize the Sixth International RILEM Symposium on SCC and the Fourth North-American Conference on the Design and Use of SCC, held on Sept 26-29, 2010 in Montreal, Quebec, Canada. The RILEM series of symposia started in 1999 in Stockholm, followed by Tokyo in 2001, Reykjavik in 2003, Chicago in 2005, and Ghent in 2007 with a steadily increasing number of papers, participants, and interest from across the globe. Due to the growing success of SCC, regional conferences have been organized, such as the North-American Conference on the Design and Use of SCC held in Chicago in 2002, 2005, and 2008; the International Symposium on Design, Performance and Use of SCC held nd in Changsa, China in 2005 and in Beijing, China in 2009; as well as the 2 International Conference on Advances in Concrete Technology in the Middle East: SCC held in Abu Dhabi in 2009. It can be concluded that these regional Conferences and Symposia were highly successful and reached a far more international audience than anticipated. Nearly 100 papers were submitted for these proceedings from which the International Scientific Committee selected 37 contributions covering a wide range of timely and original subjects from around the world. We would like to acknowledge the input of the International Scientific Committee for providing critical input to guarantee high quality of these peer-reviewed proceedings. We invite you to explore a wealth of information in the electronic proceedings.

Download or read book Ultra High Performance Concrete and Nanotechnology in Construction Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials written by Insert Name Here and published by kassel university press GmbH. This book was released on 2012-01-01 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt: