Download or read book Repair and Retrofit of Unreinforced Masonry Walls written by Teymour Manzouri and published by . This book was released on 1995 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Retrofitting of Unreinforced Masonry Walls Using Fiber Reinforced Polymer Laminates written by Reid Robert Senescu and published by . This book was released on 2004 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake resistant Design Of Masonry Buildings written by Miha Tomazevic and published by World Scientific. This book was released on 1999-07-05 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, a considerable amount of experimental and analytical research on the seismic behaviour of masonry walls and buildings has been carried out. The investigations resulted in the development of methods for seismic analysis and design, as well as new technologies and construction systems. After many centuries of traditional use and decades of allowable stress design, clear concepts for limit state verification of masonry buildings under earthquake loading have recently been introduced in codes of practice.Although this book is not a review of the state-of-the-art of masonry structures in earthquake zones, an attempt has been made to balance the discussion on recent code requirements, state-of-the-art methods of earthquake-resistant design and the author's research work, in order to render the book useful for a broader application in design practice. An attempt has also been made to present, in a condensed but easy to understand way, all the information needed for earthquake-resistant design of masonry buildings constructed using traditional systems. The basic concepts of limit state verification are presented and equations for seismic resistance verification of masonry walls of all types of construction, (unreinforced, confined and reinforced) as well as masonry-infilled reinforced concrete frames, are addressed. A method for seismic resistance verification, compatible with recent code requirements, is also discussed. In all cases, experimental results are used to explain the proposed methods and equations.An important part of this book is dedicated to the discussion of the problems of repair, retrofit and rehabilitation of existing masonry buildings, including historical structures in urban centres. Methods of strengthening masonry walls as well as improving the structural integrity of existing buildings are described in detail. Wherever possible, experimental evidence regarding the effectiveness of the proposed strengthening methods is given.
Download or read book Repair of Earthquake Damaged Concrete and Masonry Wall Buildings written by Federal Emergency Agency and published by FEMA. This book was released on 2013-04-13 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the two damaging California earthquakes in1989 (Loma Prieta) and 1994 (Northridge), many concrete wall and masonry wall buildings were repaired using federal disaster assistance funding. The repairs were based on inconsistent criteria, giving rise to controversy regarding criteria for the repair of cracked concrete and masonry wall buildings. To help resolve this controversy, the Federal Emergency Management Agency (FEMA) initiated a project on evaluation and repair of earthquake-damaged concrete and masonry wall buildings in 1996. The ATC-43 project addresses the investigation and evaluation of earthquake damage and discusses policy issues related to the repair and upgrade of earthquake-damaged buildings. The project deals with buildings whose primary lateral-force-resisting systems consist of concrete or masonry bearing walls with flexible or rigid diaphragms, or whose vertical-load-bearing systems consist of concrete or steel frames with concrete or masonry infill panels. The intended audience is design engineers, building owners, building regulatory officials, and government agencies. The project results are reported in three documents. TheFEMA306report, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Basic Procedures Manual, provides guidance on evaluating damage and analyzing future performance. Included in the document are component damage classification guides, and test and inspection guides. FEMA 307, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Technical Resources, contains supplemental information including results from a theoretical analysis of the effects of prior damage on single-degree-of-freedom mathematical models, additional background information on the component guides, and an example of the application of the basic procedures. FEMA 308, The Repair of Earthquake Damaged Concrete and Masonry Wall Buildings ,discusses the policy issues pertaining to the repair of earthquake-damaged buildings and illustrates how the procedures developed for the project can be used to provide a technically sound basis for policy decisions. It also provides guidance for the repair of damaged components.
Download or read book Fastenings for Seismic Retrofitting written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1997 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: The economic consequences and loss of life make earthquake disasters catastrophic anywhere in the world. Seismic retrofitting, or repair, of buildings is an essential component for mitigating the effects of earthquakes. This state-of-the-art report reviews and introduces the latest design concepts and methods for seismic retrofitting throughout the world, with emphasis on the use of fastening systems.
Download or read book PRO 3 International RILEM Workshop on Evaluation and Strengthening of Existing Masonry Structures written by Luigia Binda and published by RILEM Publications. This book was released on 1997 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Design Examples of Seismic Retrofit of Structures written by Mohammad Yekrangnia and published by Butterworth-Heinemann. This book was released on 2018-09-13 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Design Examples of Seismic Retrofit of Structures provides insights on the problems associated with the seismic retrofitting of existing structures. The authors present various international case studies of seismic retrofitting projects and the different possible strategies on how to handle complex problems encountered. Users will find tactics on a variety of problems that are commonly faced, including problems faced by engineers and authorities who have little or no experience in the practice of seismic retrofitting. - Provides several examples of retrofitting projects that cover different structural systems, from non-engineered houses, to frame buildings - Presents various retrofitting methods through examples - Provides detailed, step-by-step design procedures for each example - Includes real retrofit projects with photos of the details of various retrofitting techniques - Contains several modeling details and hints making use of various software in this area
Download or read book Retrofitting of Unreinforced Masonry Walls Using Fiber Reinforced Polymer Laminates written by Khalid M. Mosalam and published by . This book was released on 2000 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compares the structural response of unretrofitted unreinforced masonry (URM) walls with URM walls retrofitted on one side with glass fiber reinforced polymer (FRP) laminates. Six walls were tested using the diagonal tension standard test procedures. In this investigation, 2 objectives are considered. 1) a comparison is made between the improvements in performance provided by retrofitting a single-wythe wall vs. that provided by retrofitting a triple-wythe wall. 2) the performance enhancement provided by the FRP is compared with 2 mortar-to-brick strength ratios.
Download or read book Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings written by Federal Emergency Agency and published by FEMA. This book was released on 2013-04-02 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the two damaging California earthquakes in 1989 (Loma Prieta) and 1994 (Northridge), many concrete wall and masonry wall buildings were repaired using federal disaster assistance funding. The repairs were based on inconsistent criteria, giving rise to controversy regarding criteria for the repair of cracked concrete and masonry wall buildings. To help resolve this controversy, the Federal Emergency Management Agency (FEMA) initiated a project on evaluation and repair of earthquake damaged concrete and masonry wall buildings in 1996. The ATC-43 project addresses the investigation and evaluation of earthquake damage and discusses policy issues related to the repair and upgrade of earthquake damaged buildings. The project deals with buildings whose primary lateral-force-resisting systems consist of concrete or masonry bearing walls with flexible or rigid diaphragms, or whose vertical-load-bearing systems consist of concrete or steel frames with concrete or masonry infill panels. The intended audience is design engineers, building owners, building regulatory officials, and government agencies. The project results are reported in three documents. The FEMA 306 report, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Basic Procedures Manual, provides guidance on evaluating damage and analyzing future performance. Included in the document are component damage classification guides, and test and inspection guides. FEMA 307, Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings, Technical Resources, contains supplemental information including results from a theoretical analysis of the effects of prior damage on single-degree-of-freedom mathematical models, additional background information on the component guides, and an example of the application of the basic procedures. FEMA 308, The Repair of Earthquake Damaged Concrete and Masonry Wall Buildings, discusses the policy issues pertaining to the repair of earthquake damaged buildings and illustrates how the procedures developed for the project can be used to provide a technically sound basis for policy decisions. It also provides guidance for the repair of damaged components.
Download or read book Evaluation of Earthquake Damaged Concrete and Masonry Wall Buildings written by and published by . This book was released on 1999 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Repair of Earthquake Damaged Concrete and Masonry Wall Buildings written by and published by . This book was released on 1999 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this document is to present practical guidance for the repair and upgrading of earthquake damaged buildings with primary lateral-force-resisting systems consisting of concrete bearing walls, masonry bearing walls, or infilled frames. The guidance consists of a policy framework for facilitating the determination of the appropriate scope of repair or upgrading measures. This document also includes outlines of specific repair techniques that can address the component damage common to these buildings. The criteria and procedures are based on the evaluation of the anticipated seismic performance of a subject building at three different times: in its condition immediately before the damaging earthquake (pre event), in its damaged condition, and in its repaired or upgraded condition. This document may be used as a technical resource to facilitate the settlement of insurance claims, the development of policy and strategy for repair, or other appropriate purposes. The intended users of the document are design engineers, building owners, building officials, insurance adjusters, and government agencies.
Download or read book Masonry written by John M. Melander and published by ASTM International. This book was released on 1993 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the symposium of the same name held in Miami, Florida in December 1992. The 28 peer-reviewed papers address topics in design and detail, installation and materials, testing and evaluation, and strategies and techniques. Annotation copyright Book News, Inc. Po
Download or read book Seismic Evaluation of Existing Buildings written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2003-01-01 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a three-tiered process for seismic evaluation of existing buildings in any level of seismicity. This standard is intended to serve as a nationally applicable tool for design professionals, code officials, and building owners looking to seismically evaluate existing buildings. It considers various aspects of building performance.
Download or read book Assessment and Retrofit of Masonry Structures written by Ahmad A. Hamid and published by . This book was released on 2019-05-31 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides background, reference material, and guidance to design professionals, building owners, and contractors on existing masonry. Construction characteristics of masonry structures, typical material properties, and analytical approaches are included for historic, transitional, and modern masonry construction typologies. The main focus of the book is structural stabilization, strengthening, and retrofit with maintenance and serviceability items (such as water penetration and cleaning) addressed as subtopics.This book also incorporates discussion on the evaluation and retrofit process, site investigation and analysis, retrofit, monitoring, and maintenance. Assessment and retrofit projects conducted by the authors are presented as case studies to highlight technical issues and illustrate the process of developing a rational methodology for different types of masonry assessment and retrofit projects.Assessment and retrofit projects conducted by the authors are presented in a special Chapter as case studies to highlight technical issues and illustrate the process of developing a rational assessment and retrofit methodology for different types of masonry assessment and retrofit projects.
Download or read book Conservation of Historic Brick Structures written by Norbert Baer and published by Routledge. This book was released on 2015-11-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of brick construction throughout the world, there has been no major investigation into its deterioration and durability. This book provides the results of a major international study led by West Germany which examines the causes of decay in addition to the treatment and methods of conserving brickwork and historic mortars. The deterioration mechanisms discussed cover bio deterioration, salt damage and the effects of air pollutants and moisture on masonry. Considerable attention is also devoted to historic mortars and renders, their analysis, behaviour under the stress of air pollution and the development of compatible modern formulations. Conservation methods for brick masonry, including de-salination, protective coatings and injection grouting are examined in detail. A useful and extensive range of case study material is also provided. This volume represents the most comprehensive, state of the art overview of the conservation of historic brick masonry, and will be an invaluable source of reference for all conservation practitioners and researchers working in this field.
Download or read book Nonconventional and Vernacular Construction Materials written by Kent A. Harries and published by Woodhead Publishing. This book was released on 2019-11-18 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconventional and Vernacular Construction Materials: Characterisation, Properties and Applications, Second Edition covers the topic by taking into account sustainability, the conservation movement, and current interests in cultural identity and its preservation. This updated edition presents case studies, information on relevant codes and regulations, and how they apply (or do not apply) to nocmats. Leading international experts contribute chapters on current applications and the engineering of these construction materials. Sections review vernacular construction, provide future directions for nonconventional and vernacular materials research, focus on natural fibers, and cover the use of industrial byproducts and natural ashes in cement mortar and concrete. - Takes a scientifically rigorous approach to vernacular and non-conventional building materials and their applications - Includes a series of case studies and new material on codes and regulations, thus providing an invaluable compendium of practical knowhow - Presents the wider context of materials science and its applications in the sustainability agenda
Download or read book Non Metallic FRP Reinforcement for Concrete Structures written by L. Taerwe and published by CRC Press. This book was released on 2004-06-02 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with a wide range of non-metallic materials, this book opens up possibilities of lighter, more durable structures. With contributions from leading international researchers and design engineers, it provides a complete overview of current knowledge on the subject.
