Download or read book Renewable Energy Renewable Living Heating and cooling p 161 576 written by and published by . This book was released on 1983 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Energy Sources and Climate Change Mitigation written by Ottmar Edenhofer and published by Cambridge University Press. This book was released on 2011-11-21 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Intergovernmental Panel on Climate Change Special Report (IPCC-SRREN) assesses the potential role of renewable energy in the mitigation of climate change. It covers the six most important renewable energy sources - bioenergy, solar, geothermal, hydropower, ocean and wind energy - as well as their integration into present and future energy systems. It considers the environmental and social consequences associated with the deployment of these technologies, and presents strategies to overcome technical as well as non-technical obstacles to their application and diffusion. SRREN brings a broad spectrum of technology-specific experts together with scientists studying energy systems as a whole. Prepared following strict IPCC procedures, it presents an impartial assessment of the current state of knowledge: it is policy relevant but not policy prescriptive. SRREN is an invaluable assessment of the potential role of renewable energy for the mitigation of climate change for policymakers, the private sector, and academic researchers.

Download or read book Renewable and Efficient Electric Power Systems written by Gilbert M. Masters and published by John Wiley & Sons. This book was released on 2005-01-03 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive textbook for the new trend of distributed power generation systems and renewable energy sources in electric power systems. It covers the complete range of topics from fundamental concepts to major technologies as well as advanced topics for power consumers. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department -- to obtain the manual, send an email to [email protected]

Download or read book A Manual for the Economic Evaluation of Energy Efficiency and Renewable Energy Technologies written by Walter Short and published by . This book was released on 2005 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Manual for the Economic Evaluation of Energy Efficiency and Renewable Energy Technologies provides guidance on economic evaluation approaches, metrics, and levels of detail required, while offering a consistent basis on which analysts can perform analyses using standard assumptions and bases. It not only provides information on the primary economic measures used in economic analyses and the fundamentals of finance but also provides guidance focused on the special considerations required in the economic evaluation of energy efficiency and renewable energy systems.

Download or read book Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications written by M. Sengupta and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Agrindex written by and published by . This book was released on 1990 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sustainable Energy written by David J. C. MacKay and published by . This book was released on 2009 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy renovation of multi family buildings in Sweden written by Lina La Fleur and published by Linköping University Electronic Press. This book was released on 2019-09-18 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential buildings account for 27% of the final energy use in the European Union. In cold climates, space heating represents the largest proportion of the energy demand in residential buildings. By implementing energy efficiency measures (EEMs) in existing buildings, energy use can be significantly reduced. The Energy Performance of Buildings Directive states that renovations of buildings offer an opportunity to improve energy efficiency. Renovations that include measures implemented with the specific purpose of reducing energy use are referred to as energy renovations. In addition to improving energy efficiency, an energy renovation can also improve the indoor environment. Sweden, like many other European countries, faces the challenge of renovating an ageing building stock with poor energy performance. Improving energy efficiency and performing energy renovations in a cost-effective manner is central, and optimization approaches are often used to identify suitable EEMs and energy renovation approaches. New buildings usually feature better energy performance compared to older buildings, and one approach for reducing energy use in the building sector could be to demolish old buildings with poor thermal performance and build new buildings with better thermal performance. The aim of this thesis is to evaluate energy renovations of multi-family buildings with regard to space heating demand, life cycle costs, indoor environment and primary energy use. The choice between energy renovation of a multi-family building and the demolition and construction of a new one is also investigated with regard to life cycle costs (LCCs). A Swedish multi-family building in which energy renovation has been carried out is used as a case study. The building was originally constructed in 1961 and has a lightweight concrete construction. The renovation included improving the thermal performance of the building envelope and replacing the exhaust air ventilation system with a mechanical supply and exhaust air ventilation system with heat recovery. The methods used in the studies include dynamic whole building energy simulation, life cycle cost analysis and optimizations, and a questionnaire on indoor environment perception. Extensive field measurements have been performed in the building prior to and after renovation to provide input data and to validate numerical predictions. In addition to the studied building, the analysis of the choice between energy renovation and the demolition and construction of a new building includes three other building construction types, representing common Swedish building types from the 1940s, 1950s and 1970s. The analysis shows that the energy renovation led to a 44% reduction in space heating demand and an improved indoor environment. The indoor temperature was higher after the renovation and the perception of the indoor temperature, air quality and noise in the building improved. The EEMs implemented as part of the energy renovation have a slightly higher LCC than the optimal combinations of EEMs identified in the LCC optimization. It is not cost-optimal to implement any EEMs in the building if the lowest possible LCC is the objective function. Attic insulation has a low cost of implementation but has limited potential in the studied building with its relatively good thermal properties. Insulation of the façade is an expensive measure, but has a great potential to reduce heat demand because of the large façade area. Façade insulation is thus required to achieve significant energy savings. Heat recovery in the ventilation system is cost-effective with an energy saving target above 40% in the studied building. The primary energy factors in the Swedish Building Code favor ground source heat pumps as a heat supply system in the studied building. The LCC of renovation is lower compared to demolishing and constructing a new building. A large proportion of the LCC of demolition and new construction relates to the demolition of the existing building. In a building with a high internal volume to floor area ratio, it is not always possible to renovate to the same energy performance level as when constructing a new building. A more ambitious renovation approach is also needed compared to a building with a smaller volume to floor area ratio. Nära 27 % av den totala energianvändningen i den Europeiska Unionen sker i bostäder. I länder med kallt klimat används den största delen till uppvärmning. Genom att implementera energieffektiviseringsåtgärder i befintliga byggnaden kan energiprestandan signifikant förbättras. Europeiska Unionens direktiv om byggnaders energiprestanda framhåller att ett tillfälle att förbättra byggnaders energieffektivitet finns då byggnader ska renoveras. Byggnadsrenoveringar som innehåller åtgärder som implementeras med det primära syftet att minska energianvändningen kallas ofta energirenoveringar. Utöver energieffektivisering kan energirenoveringar ofta förbättra inomhusmiljön i byggnaden. Som många andra Europeiska länder står Sverige inför utmaningen att renovera ett åldrande byggnadsbestånd med låg energiprestanda. Kostnadseffektivitet är centralt vid energirenoveringar och energieffektivisering och optimeringsansatser är vanliga för att identifiera vilka energieffektiviseringsåtgärder som bör implementeras. Nya byggnader har som regel bättre energiprestanda jämfört med äldre byggnader, och en ansats till ett minska energianvändningen i byggnadssektorn överlag är således att riva äldre byggnader med låg energiprestanda och konstruera nya byggnader med bättre energiprestanda. Syftet med denna avhandling är att utvärdera energirenoveringar av flerfamiljshus avseende effekterna på uppvärmningsbehov, livscykelkostnader, inomhusmiljö och primärenergianvändning. Valet mellan energirenovering kontra att riva och bygga en ny byggnad analyseras också utifrån ett livscykelkostnadsperspektiv. För att studera detta har en svensk flerfamiljsbyggnad som genomgått energirenovering studerats. Byggnaden konstruerades 1961 och har en lättbetongstomme. När byggnaden renoverades förbättrades prestandan hos byggnadens klimatskal och frånluftsventilationssystemet byttes ut mot ett balanserat mekanisk ventilationssystem med värmeåtervinning. Metoderna som använts i studierna i denna avhandling är dynamisk byggandssimulering, beräkning och optimering av livscykelkostnader, samt en enkätstudie om hur de boende uppfattar sin inomhusmiljö. Omfattande mätningar har utförts i byggnaden och har använts som indata och för att validera resultaten. Utöver den studerade byggnaden har tre andra byggnadstyper inkluderats i analysen av valet mellan energirenovering och att riva och konstruera en ny byggnads. Dessa byggnadstyper representerar vanliga svenska byggnadstyper från 1940-, 1950- och 1970-talet. Analyserna visar att den renovering som genomfördes i byggnaden ledde till en minskning av uppvärmningsbehovet med 44 % och en förbättring av inomhusmiljön. Inomhustemperaturen var högre efter renoveringen, och de boende uppfattade temperaturförhållanden, luftkvalitet och bullersituationen som bättre efter renoveringen. De energieffektiviserande åtgärder som implementerades vid renoveringen gav en något högre livscykelkostnad än de åtgärder som identifierades som optimala genom livscykelkostnadsoptimering. Det är inte kostnadseffektivt att implementera några energieffektiviseringsåtgärder som del av renoveringen om den lägsta livscykelkostnaden är målsättningen. Vindsisolering är en förhållandevis billigt åtgärd att genomföra, men har begränsad potential i den studerade byggnaden vars vind redan har relativt god termisk prestanda. Fasadisolering kräver en större investering, men har större potential att minska energianvändning på grund av den stora fasadytan. Detta innebär att det är nödvändigt att isolera fasaden för att uppnå hög energibesparing. Värmeåtervinning i ventilationssystemet är kostnadsoptimalt om ett energisbesparingsmål på mer än 40 % ställs på energirenoveringen. Primärenergifaktorerna i den svenska byggnadskoden gynnar bergvärmepump som energitillförselsystem i de studerade byggnaden. Kostnaden för att energirenovera är lägre än att riva och bygga en ny byggnad. En stor andel av kostnaderna vid rivning och nybyggnation är kopplad till rivning och bortforsling av rivningsmassa. I byggnadstyper med stor inre volym i förhållande till uppvärmd golvyta är det inte alltid möjlig att energirenovera till en energiprestanda som är lika god som en ny byggnad. Det krävs också en mer ambitiös renovering för att uppnå samma energiprestanda som en byggnad med mindre inre volym i förhållande till uppvärmd golvyta.

Download or read book Blue Book on Geothermal Resources written by and published by . This book was released on 1999 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Power and Sustainable Development written by International Atomic Energy Agency and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transforming the energy system is at the core of the dedicated sustainable development goal on energy within the new United Nations development agenda. This publication explores the possible contribution of nuclear energy to addressing the issues of sustainable development through a large selection of indicators. It reviews the characteristics of nuclear power in comparison with alternative sources of electricity supply, according to economic, social and environmental pillars of sustainability. The findings summarized in this publication will help the reader to consider, or reconsider, the contribution that can be made by the development and operation of nuclear power plants in contributing to more sustainable energy systems.

Download or read book Solar Engineering of Thermal Processes Photovoltaics and Wind written by John A. Duffie and published by John Wiley & Sons. This book was released on 2020-03-24 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bible of solar engineering that translates solar energy theory to practice, revised and updated The updated Fifth Edition of Solar Engineering of Thermal Processes, Photovoltaics and Wind contains the fundamentals of solar energy and explains how we get energy from the sun. The authors—noted experts on the topic—provide an introduction to the technologies that harvest, store, and deliver solar energy, such as photovoltaics, solar heaters, and cells. The book also explores the applications of solar technologies and shows how they are applied in various sectors of the marketplace. The revised Fifth Edition offers guidance for using two key engineering software applications, Engineering Equation Solver (EES) and System Advisor Model (SAM). These applications aid in solving complex equations quickly and help with performing long-term or annual simulations. The new edition includes all-new examples, performance data, and photos of current solar energy applications. In addition, the chapter on concentrating solar power is updated and expanded. The practice problems in the Appendix are also updated, and instructors have access to an updated print Solutions Manual. This important book: • Covers all aspects of solar engineering from basic theory to the design of solar technology • Offers in-depth guidance and demonstrations of Engineering Equation Solver (EES) and System Advisor Model (SAM) software • Contains all-new examples, performance data, and photos of solar energy systems today • Includes updated simulation problems and a solutions manual for instructors Written for students and practicing professionals in power and energy industries as well as those in research and government labs, Solar Engineering of Thermal Processes, Fifth Edition continues to be the leading solar engineering text and reference.

Download or read book Energy Efficiency in Domestic Appliances and Lighting written by Paolo Bertoldi and published by Springer. This book was released on 2023-05-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains peer-reviewed papers presented at the 10th International Conference on Energy Efficiency in Domestic Appliances and Lighting (EEDAL'19), held in Jinan, China from 6-8 November 2019. Energy efficiency helps to mitigate CO2 emissions and at the same time increases the security of energy supply. Energy efficiency is recognized as the cleanest, quickest and cheapest energy source. Not only this, but energy efficiency brings several additional benefits for society and end-users, such as lower energy costs, reduced local pollution, better outdoor and indoor air quality, etc. However, in some sectors, such as the residential sector, barriers to investments in energy efficiency remain. Legislation adopted in several jurisdictions (EU, Japan, USA, China, India, Australia, Brazil, etc.) helps in removing barriers and fosters investments in energy efficiency. These initiatives complement innovative financing schemes for energy efficiency, the provision of energy services by energy service companies and different types of information programs. At the same time, progress in appliance technologies and in solid state lighting offer high levels of efficiency. LED lighting is an example. As with previous conferences in this series, EEDAL’19 provided a unique forum to discuss and debate the latest developments in energy and environmental impact of households, including appliances, lighting, heating and cooling equipment, electronics, smart meters, consumer behavior, and policies and programs. EEDAL addressed non-technical issues such as consumer behavior, energy access in developing countries, and demand response.

Download or read book Solar Energy Perspectives written by Cédric Philibert and published by OECD. This book was released on 2011 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 90 minutes, enough sunlight strikes the earth to provide the entire planet's energy needs for one year. While solar energy is abundant, it represents a tiny fraction of the world's current energy mix. But this is changing rapidly and is being driven by global action to improve energy access and supply security, and to mitigate climate change. Around the world, countries and companies are investing in solar generation capacity on an unprecedented scale, and, as a consequence, costs continue to fall and technologies improve. This publication gives an authoritative view of these technologies and market trends, in both advanced and developing economies, while providing examples of the best and most advanced practices. It also provides a unique guide for policy makers, industry representatives and concerned stakeholders on how best to use, combine and successfully promote the major categories of solar energy: solar heating and cooling, photovoltaic and solar thermal electricity, as well as solar fuels. Finally, in analysing the likely evolution of electricity and energy-consuming sectors - buildings, industry and transport - it explores the leading role solar energy could play in the long-term future of our energy system.

Download or read book Solar Pumping for Water Supply written by ALBERTO. W. KIPRONO IBANEZ LLARIO (ASENATH.) and published by . This book was released on 2020-09-28 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar power for pumping groundwater has a vast potential for improving the sustainability of water supply schemes. However experience also shows that a lack of knowledge, capacity and expertise to design and implement such schemes is holding back their adoption. This book bridges this gap to equip engineers and technicians with the requisite knowledge for design, implementation and operation of sustainable solar powered water schemes.Solar Pumping for Water Supply is a state of the art review of solar water pumping technology combined with practical insights, lessons and best practices drawn from experience. It takes the reader step by step through the different phases that comprise a solar water pumping project, namely: assessment, design, purchase of equipment, installation, operation and management. The book also covers the economics of using solar pumping technology, especially when compared to diesel generators and hand pumps. Finally, the social aspects are included, specifically relating to the operation and management of solar pumping systems and the role that beneficiaries, implementers, government and the private sector might play to ensure long-lasting water supply. The book provides links and references to tools, documents and videos to accompany the content of the different chapters.Essential reading for solar technical practitioners at NGOs, UN agencies, government offices and private sector, including Global and Regional Technical advisors and Field engineers wanting to understand and know how to design water systems using solar power. A basic knowledge in the field of water supply is assumed, but no previous knowledge of solar photovoltaic technology is required.Alberto Ibáñez Llario is a Global Solar and Water Advisor with the International Organization for Migration and has 15 years of experience in water systems and solar PV in various locations around the world.Asenath Kiprono is a solar water pumping expert with 12 years' experience in design and implementation of pumping systems in rural Africa, including solar pumping systems in the private, public and humanitarian sectors.

Download or read book Organic Rankine Cycle ORC Power Systems written by Ennio Macchi and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic Rankine Cycle (ORC) Power Systems: Technologies and Applications provides a systematic and detailed description of organic Rankine cycle technologies and the way they are increasingly of interest for cost-effective sustainable energy generation. Popular applications include cogeneration from biomass and electricity generation from geothermal reservoirs and concentrating solar power installations, as well as waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes. With hundreds of ORC power systems already in operation and the market growing at a fast pace, this is an active and engaging area of scientific research and technical development. The book is structured in three main parts: (i) Introduction to ORC Power Systems, Design and Optimization, (ii) ORC Plant Components, and (iii) Fields of Application. - Provides a thorough introduction to ORC power systems - Contains detailed chapters on ORC plant components - Includes a section focusing on ORC design and optimization - Reviews key applications of ORC technologies, including cogeneration from biomass, electricity generation from geothermal reservoirs and concentrating solar power installations, waste heat recovery from gas turbines, internal combustion engines and medium- and low-temperature industrial processes - Various chapters are authored by well-known specialists from Academia and ORC manufacturers

Download or read book Transportation Energy Data Book written by and published by . This book was released on 2005 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry in the Community ChemCom written by American Chemical Society and published by Macmillan. This book was released on 2011-06-17 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: Touted as the most successful NSF-funded project published, Chemistry in the Community (ChemCom) by the American Chemical Society (ACS) offers a meaningful and memorable chemistry program for all levels of high school students. ChemCom covers traditional chemistry topics within the context of societal issues and real-world scenarios. Centered on decision-making activities where students are responsible for generating data in an investigating, analyzing that data and then applying their chemistry knowledge to solve the presented problem. The text is intensively laboratory-based, with all 39 of the investigations integrated within the text, not separate from the reading. With the ChemCom program, students learn more organic and biochemistry, more environmental and industrial chemistry, and more on the particulate nature of matter than other textbooks all within the relevance of solving problems that arise in everyday life. Meticulously updated to meet the needs of today's teachers and students, the new sixth edition of ChemCom adheres to the new science framework as well as the forthcoming next generation of science standards. Incorporating advances in learning and cognitive sciences, ChemCom’s wide-ranging coverage builds upon the concepts and principles found in the National Science Education Standards. Correlations are available showing how closely aligned ChemCom is to these and other state standards