Download or read book Renewable Energy and Green Metallurgy Technology written by Xin Yao and published by . This book was released on 2024-03-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this Special Issue is to immerse the reader in the latest green metallurgy technology. The production process in traditional metallurgical industry uses large amounts of fossil fuels, which consume energy and emit CO2 intensively, facing enormous challenges in energy and the environment. The industry is in urgent need of advanced techniques for replacing fossil fuels with renewable energy, and decreasing energy consumption and CO2 emission. Replacing fossil fuels with renewable energy, energy recovery, and advanced technology will lead to the development of the green metallurgical industry. In addition, the strengthening mechanisms and smelting processes of non-quenched and tempered steel for automobiles and high-nitrogen steel smelting technology will allow us to master the mechanism of green metallurgy production and decrease fossil fuel consumption and carbon dioxide emissions from the metallurgy process. The Special Issue mainly focuses on six selected topics, such as biomass energy and solar energy as replacements for fossil fuels, resource utilization of metallurgical slag, low-carbon smelting technology in steel, CO2 resource utilization, strengthening mechanisms and smelting processes of non-quenched and tempered steel for automobiles, high-nitrogen steel smelting technology, achieving green metallurgy production. The latest green metallurgy technology could provide the next direction for steel and iron production.
Download or read book Renewable Energy and Green Technology written by Narendra Kumar and published by CRC Press. This book was released on 2021-12-09 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Energy and Green Technology: Principles and Practices is based on the present need to understand the principles and utility of renewable energy and green technology to minimize dependency on fossil fuels in global development. Renewable energy is the best and cheapest source of energy as an alternate resource. There is massive potential for renewable energy globally, including in India. The efficient utilization of renewable energy resources could minimize the impact of climate change globally. Generally, renewable energy is generated from essentially inexhaustible sources, including wind power, solar power, geothermal energy, tidal energy, biomass energy, and other sources. Hence, encouraging renewable energy use could save our tomorrow from the climate change perspective and in terms of sustainable food production. This book promotes the exchange of ideas, policy formulation, and collective action to ensure a smooth transition to renewable energy. It describes the technological interventions for reducing environmental and economic damage resulting from the use of conventional energy sources. In this book, the focus is on utilizing various renewable energy sources in diverse sectors. It also elaborates the descriptive methodology of different renewable energies, accompanied by figures and tables. It provides information on biogas energy plants, gasifier technologies, and hydropower technologies, among others, along with their applications. Further, it delves into energy concepts and details significant advantages of the energy resources for sustaining the future world. Lastly, this book will provide instant access to comprehensive, cutting-edge knowledge, making it possible for academicians and researchers to utilize this ever-growing wealth of information. Key features Emphasizes the understanding of the principles and utility of renewable energy and green technology to minimize dependency on fossil fuels in the era of global development Focuses on recent trends in renewable energy with principles and practices in relation to climate change Highlights advanced approaches for sustainable use of renewable energy sources Illustrates the methodology for various aspects of renewable energy with figures and charts Discusses the green technology usages of the agriculture and forestry sectors Provides comprehensive cutting-edge information for policymakers in the field of renewable energy
Download or read book Energy Technology 2020 Recycling Carbon Dioxide Management and Other Technologies written by Xiaobo Chen and published by Springer Nature. This book was released on 2020-01-15 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection addresses the pressing needs for sustainable technologies with reduced energy consumption and environmental pollutions and the development and application of alternative sustainable energy to maintain a green environment and efficient and long-lasting energy supply. Contributors represent both industry and academia and focus on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, and recycling and waste heat recovery, as well as emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal emissions, and reduce carbon dioxide and other greenhouse emissions. Authors also explore the valorization of materials and their embodied energy including byproducts or coproducts from ferrous and nonferrous industries, batteries, electronics, and other complex secondary materials.
Download or read book Energy Technology 2023 written by Shafiq Alam and published by Springer Nature. This book was released on 2023-02-07 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clean and sustainable energy is of paramount importance for industrial activities, economic development, environment, and public welfare. Aiming to reach NetZero, researchers in both academia and industry as well as policymakers are now putting tremendous efforts into the generation, storage, and applications of clean energy. This collection focuses on new and efficient energy technologies including innovative ore beneficiation, smelting technologies, recycling and waste heat recovery, and emerging novel energy solutions. The volume also covers a broad range of mature and new technological aspects of sustainable energy ecosystems, processes that improve energy efficiency, reduce thermal intensity and pollutants, and reduce carbon dioxide and other greenhouse emissions. Topics include, but are not limited to:• Energy efficient technologies for minerals, metals & materials processing • Clean energy technologies, such as biomass, solar, wind, geothermal, nuclear including SMRs, hydrogen, etc. • Renewable energy resources to reduce the consumption of traditional fossil fuels • Emerging technologies for renewable energy harvesting, conversion, and storage • New concepts or devices for energy generation, conversion, and distribution • Waste heat recovery and other industrial energy efficient technologies • Energy education and energy regulation • Scale-up, stability, and life-cycle analysis of energy technologies and improvement of existing energy-intensive processes • Theory and simulation in energy harvesting, conversion, and storage • Design, operation, and optimization of processes for energy generation (e.g., carbon capture) and conversion of energy carriers • Energy efficiency improvement in process engineering (e.g., for biomass conversion and improved combustion) and electrical engineering (e.g., for power conversion and developing smart grids) • Thermo-electric/electrolysis/photo-electrolysis/fundamentals of PV • Emission control, CO2 capture, and conversion • Carbon sequestration techniques • CO2 and other greenhouse gas reduction metallurgy in ferrous (iron & steel making and forming), non-ferrous and reactive metals including critical rare-earth metals • Sustainability and life cycle assessment of energy systems • Thermodynamics and modelling for sustainable metallurgical processes • 'Smart cool materials' for urban heat island mitigation (such as cool roof infrared reflecting material, and low-temperature heat absorbers for use in air conditioner condensers - like 'endothermic materials') • Methodologies for reducing the cost of energy materials production • Circular economy and developing resource efficiency model for cutting down the transport from remote places • Materials extraction and processing steps for enhancing energy efficiencies in batteries, supercapacitors, and energy efficient cells • Foundational industry (metals-alloys, chemicals, refractories, cement) and energy economy and role of mineral extraction
Download or read book The Rare Metals War written by Guillaume Pitron and published by . This book was released on 2024-02-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The resources race is on. Powering our digital lives and green technologies are some of the Earth's most precious metals -- but they are running out. And what will happen when they do? The green-tech revolution has been lauded as the silver bullet to a new world. One that is at last free of oil, pollution, shortages, and cross-border tensions. Now updated after several years of research across a dozen countries, this book cuts across conventional green thinking to probe the hidden, dark side of green technology. By breaking free of fossil fuels, we are in fact setting ourselves up for a new dependence -- on rare metals such as cobalt, gold, and palladium. They are essential to electric vehicles, wind turbines, solar panels, our smartphones, computers, tablets, and other everyday connected objects. China has captured the lion's share of the rare metals industry, but consumers know very little about how they are mined and traded, or their environmental, economic, and geopolitical costs. The Rare Metals Waris a vital exposé of the ticking time-bomb that lies beneath our new technological order. It uncovers the reality of our lavish and ambitious environmental quest that involves risks as formidable as those it seeks to resolve.
Download or read book Sustainability in the Mineral and Energy Sectors written by Sheila Devasahayam and published by CRC Press. This book was released on 2016-09-15 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable practices within the mining and energy sectors are assuming greater significance due to uncertainty and change within the global economy and safety, security, and health concerns. This book examines sustainability issues facing the mining and energy sectors by addressing six major themes: Mining and Mineral Processing; Metallurgy and Recycling; Environment; Energy; Socioeconomic and Regulatory; and Sustainable Materials and Fleets. Emphasizing an integrated transdisciplinary approach, it deliberates on optimizing mining productivity and energy efficiency and discusses integrated waste management practices. It discusses risk management, cost cutting, and integration of sustainable practices for long-term business value. It gives a comprehensive outlook for sustainable mineral futures from academic and industry perspectives covering mine to mill optimization, waste, risk and water management, improved efficiencies in mining tools and equipment, and performance indicators for sustainable developments. It covers how innovation and research underpin management of natural resources including sustainable carbon management. •Focuses on mining and mineral processing, metallurgy and recycling, the environment, energy, socioeconomic and regulatory issues, and sustainable materials and fleets. •Describes metallurgy and recycling and uses economic, environmental and social parameter analyses to identify areas for improvement in iron, steel, aluminium, lead, zinc, copper, and gold production. •Discusses current research on mining, performance indicators for sustainable development, sustainability in mining equipment, risk and safety management, and renewable energy resources •Covers alternative and conventional energy sources for the mineral sector as well water treatment and remediation and energy sustainability in mining. •Provides an overview of sustainable carbon management. •Offers an interdisciplinary approach with international focus.
Download or read book Encyclopedia of Renewable Energy Sustainability and the Environment written by and published by Elsevier. This book was released on 2024-08-09 with total page 4061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable Energy, Sustainability and the Environment, Four Volume Set comprehensively covers all renewable energy resources, including wind, solar, hydro, biomass, geothermal energy, and nuclear power, to name a few. In addition to covering the breadth of renewable energy resources at a fundamental level, this encyclopedia delves into the utilization and ideal applications of each resource and assesses them from environmental, economic, and policy standpoints. This book will serve as an ideal introduction to any renewable energy source for students, while also allowing them to learn about a topic in more depth and explore related topics, all in a single resource.Instructors, researchers, and industry professionals will also benefit from this comprehensive reference. - Covers all renewable energy technologies in one comprehensive resource - Details renewable energies' processes, from production to utilization in a single encyclopedia - Organizes topics into concise, consistently formatted chapters, perfect for readers who are new to the field - Assesses economic challenges faced to implement each type of renewable energy - Addresses the challenges of replacing fossil fuels with renewables and covers the environmental impacts of each renewable energy
Download or read book Renewable Energy written by Tolga Taner and published by BoD – Books on Demand. This book was released on 2021-02 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses renewable energy resources and systems as well as energy efficiency. It contains twenty-three chapters over six sections that address a multitude of renewable energy types, including solar and photovoltaic, biomass, hydroelectric, and geothermal. The information presented herein is a scientific contribution to energy and environmental regulations, quality and efficiency of energy services, energy supply security, energy market-based approaches, government interventions, and the spread of technological innovation.
Download or read book Renewable Energy Technologies written by Nayan Kumar and published by John Wiley & Sons. This book was released on 2022-08-23 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: RENEWABLE ENERGY TECHNOLOGIES With the goal of accelerating the growth of green energy utilization for the sustainability of life on earth, this volume, written and edited by a global team of experts, goes into the practical applications that can be utilized across multiple disciplines and industries, for both the engineer and the student. Green energy resources are gaining more attention in academia and industry as one of the preferred choices for sustainable energy conversion. Due to the energy demand, environmental impacts, economic needs, and social issues, green energy resources are being researched, developed, and funded more than ever before. Researchers are facing numerous challenges, but there are new opportunities waiting for green energy resource utilization within the context of environmental and economic sustainability. Efficient energy conversion from solar, wind, biomass, fuel cells, and others are paramount to this overall mission and the success of these efforts. Written and edited by a global team of experts, this groundbreaking new volume from Scrivener Publishing presents recent advances in the study of green energy across a variety of fields and sources. Various applications of green energy resources, modeling and performance analysis, and grid integration aspects of green energy resources are considered. Not only laying out the concepts in an easy-to-understand way, but this team offers the engineer, scientist, student, or other professional practical solutions to everyday problems in their daily applications. Valuable as a learning tool for beginners in this area as well as a daily reference for engineers and scientists working in these areas, this is a must-have for any library.
Download or read book Renewable Energy Technologies for Energy Efficient Sustainable Development written by Arindam Sinharoy and published by Springer Nature. This book was released on 2022-01-03 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The depletion of fossil fuel reserves and concerns for environmental degradation due to the fossil fuel burning have led the scientific community to look for alternative renewable energy sources. Among the available renewable energy sources, bioenergy derived from biomass and waste resources have great potential to not only prevent environmental pollution but also be a carbon neutral energy source. In addition, adaptation of this technology could streamline new green products, alternative energy sources into real-world applications and promote a circular economy towards zero-waste approach. This book tries to bridge the existing knowledge gap in the area of bioenergy resources. The first two chapters provide introduction to the anaerobic digestion (AD) technologies and direct interspecies electron transfer in AD. The next three chapters are on biomass pretreatment technologies for process improvement. The sixth to eighth chapter discuses biogas and other by-product production from specific wastes such from dairy, food and agricultural solid waste. The following two chapters focuses on the downstream processing of anaerobic digestate and on biochar production. Integration of AD in biorefineries using bioelectrochemical systems, syngas fermentation and electricity production are discussed in the next three chapters. The final two chapters elaborates on life cycle assessment of AD based technologies.
Download or read book Renewable Energy Technologies written by Jean-Claude Sabonnadière and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the emerging generation of renewable energy technologies, covering solar energy (photovoltaic, thermal and thermodynamic energy conversion), wind energy, marine energy, small hydropower, geothermal energy, biofuels, biogas and the use of wood as a substitute for fossil fuels.
Download or read book Green Energy written by M. A. Parvez Mahmud and published by Academic Press. This book was released on 2023-01-11 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Energy: A Sustainable Future looks at life cycle assessment theory, practice, and methodologies applied in renewable energy power plants. The state-of-the-art life cycle assessment methodologies applied in power generation units are discussed following LCA analysis and key findings from energy production processes. Providing fundamental knowledge of how to measure sustainability metrics using life cycle assessment in renewable power plants, this title outlines state-of-the-art research about LCA methodologies related to low-carbon energy systems, their outcome, and how to relate the sustainable power concept with a circular economy. With theoretical concepts of LCA applied in low-carbon power generation systems, outlining environmental impacts based on comprehensive examples and case studies in solar PV, solar thermal, hydropower plants and micro-grids, this book is of great interest to engineers, policy makers, researchers and academics in the area of electric power engineering. - Consists of extensive and comprehensive life-cycle assessment examples and case studies for various renewable energy plants - Enables power engineers to evaluate the sustainability index through environmental impact assessment in renewable power plants and micro-grids - Includes assessment results showing future pathways for sustainability enhancement
Download or read book New and Renewable Energy Technologies for Sustainable Development written by Naim Afgan and published by CRC Press. This book was released on 2020-12-18 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on New and Renewable Energy Technologies for Sustainable Development held in Ponta Delgada, Azores (2002), Portugal, has provided technology specialists and hardware developers with the opportunity to discuss, review and demonstrate the research directions, the design methodologies, and the production techniques leading to cost- effective energy technologies for sustainable development. This dialog provides the context for more detailed technical presentations and panel discussions on energy systems, renewable resource exploitation, and the engineering design and optimisation for minimum resource consumption. The papers included in this volume are selected from those presented at the conference reflecting to present the state-of-the-art developments in the field. The selection of papers presented in this volume has enlightened various fields of scientific and economic development which should merge efforts in the understanding of the sustainable development concept and technological implications. The book will be of particular interest to engineering practitioners, product developers, researchers, and also economists, political scientists and government administrators exploring the multifaceted relationship between renewable energy technologies and sustainable development. Keynote lectures frame the technical and policy issues confronting the sustainable development movement and enrich the dialog between various segments of the community.
Download or read book Renewable Energy and Sustainable Technologies for Building and Environmental Applications written by Mardiana Idayu Ahmad and published by Springer. This book was released on 2016-04-20 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: This diverse resource on renewable energy and sustainable technologies highlights the status, state of the art, challenges, advancements and options in areas such as energy recovery systems, turbine ventilators, green composites, biofuels and bio-resources for energy production, wind energy, integrated energy-efficient systems, thermal energy storage, natural ventilation & day-lighting systems, and low carbon technologies for building and environmental applications. It is designed to serve as a reference book for students, researchers, manufacturers and professionals working in these fields. The editors have gathered articles from world-leading experts that clearly illustrate key areas in renewable energy and sustainability. The distinct role of these technologies in future endeavors is stressed by taking into account the opportunities to contribute with new approaches, methods and directions for building and environmental applications. The in-depth discussion presented in this book will give readers a clear understanding of every important aspect of each technology’s applications, optimum configuration, modifications, limitations and their possible improvements.
Download or read book Handbook on Renewable Energy and Green Technology written by S. Pugalendhi and published by CRC Press. This book was released on 2024-02-20 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection and compilation of various principles of renewable energy technologies and explores how we can use the sun, wind, biomass, geothermal, tidal and water resources to generate energy in a more sustainable form. Each chapter begins with the fundamental theory behind each technology illustrated with clear figures to understand the principle and applications. It also explains the fundamentals of energy, including the transfer of energy, as well as the limitations of natural resources. Starting with solar and wind energy, the text illustrates how energy from the sun, wind and water is transferred and converted into electricity. Other chapters cover methods of energy conversion, biomass energy, biofuel production and other new and renewable sources of energy such as geothermal, hydro, tidal, and ocean energy.
Download or read book The Rare Metals War written by GUILLAME. PITRON and published by . This book was released on 2020-09-10 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The resources race is on. Powering our digital lives and green technologies are some of the Earth's most precious metals -- but they are running out. And what will happen when they do? The green-tech revolution has been lauded as the silver bullet to a new world. One that is at last free of oil, pollution, shortages, and cross-border tensions. Drawing on six years of research across a dozen countries, this book cuts across conventional green thinking to probe the hidden, dark side of green technology. By breaking free of fossil fuels, we are in fact setting ourselves up for a new dependence -- on rare metals such as cobalt, gold, and palladium. They are essential to electric vehicles, wind turbines, solar panels, our smartphones, computers, tablets, and other everyday connected objects. China has captured the lion's share of the rare metals industry, but consumers know very little about how they are mined and traded, or their environmental, economic, and geopolitical costs. The Rare Metals Waris a vital exposé of the ticking time-bomb that lies beneath our new technological order. It uncovers the reality of our lavish and ambitious environmental quest that involves risks as formidable as those it seeks to resolve.
Download or read book Metallurgy written by Cyrus Xavier and published by Publifye AS. This book was released on 2024-10-03 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: ""Metallurgy: The Forging of Human Progress"" explores the pivotal role of metalworking in shaping human civilization from the Bronze Age to the Space Age. This comprehensive book argues that metallurgy has been a primary driver of technological advancement, acting as both catalyst and foundation for major leaps in human progress. Through a chronological journey, readers discover how the manipulation of metals has consistently preceded and enabled significant developments in tools, weapons, construction, and even spacecraft. The book seamlessly blends historical narratives with scientific explanations, making complex concepts accessible to a general audience interested in science and technology. It covers essential topics such as the discovery of smelting, the advent of steel production, and the creation of superalloys, while also delving into the interplay between metallurgical advancements and economic systems. What sets this work apart is its holistic approach, combining technical details with cultural insights and featuring unique perspectives from leading metallurgists and materials scientists. As the narrative progresses, readers gain a deeper understanding of how metallurgy has influenced various aspects of human society, from warfare to architecture. The book culminates in an exploration of cutting-edge research, addressing ongoing debates in the field and encouraging critical thinking about the future of metallurgy in addressing global challenges. This multifaceted perspective offers readers a comprehensive view of how the art and science of metalworking has truly forged human progress throughout history.
