Download or read book Removal of Toxic Metals from Metal Finishing Wastewater by Solvent Extraction written by Curtis W. McDonald and published by . This book was released on 1978 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Removal of Toxic Metals from Metal Finishing Wastewater by Solvent Extraction written by Curtis W. McDonald and published by . This book was released on 1978 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Techniques for Treatment of Toxic Metals from Wastewater written by Akil Ahmad and published by Elsevier. This book was released on 2022-08-27 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Techniques for Treatment of Toxic Metals from Wastewater explores the different physical and chemical methods that can be used to remove toxins from wastewater, including adsorption, solvent extraction, ion exchange, precipitation, filtration and photocatalytic degradation. Bringing together contributions from leading experts in the field, the book covers each of the different techniques in detail, combining emergent research outcomes with fundamental theoretical concepts to provide a clear appraisal of the different techniques available, along with their applications. It is an essential recourse for researchers, industrialists and students concerned with the remediation of toxic metals from water and wastewater. Covers the various techniques for metal removal and their applications in a single source Addresses emerging technologies; chemical, physical, and biological including nanotechnology Brings together novel techniques and their applications for enhancing large scale industrial production signposting opportunities for significant enhancements
Download or read book New Trends in Removal of Heavy Metals from Industrial Wastewater written by Maulin P. Shah and published by Elsevier. This book was released on 2021-04-23 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Trends in Removal of Heavy Metals from Industrial Wastewater covers the applicable technologies relating to the removal of heavy metals from wastewater and new and emerging trends in the field, both at the laboratory and industrial scale. Sections explore new environmentally friendly technologies, the principles of sustainable development, the main factors contributing to heavy metal removal from wastewater, methods and procedures, materials (especially low-cost materials originated from industrial and agricultural waste), management of wastewater containing heavy metals and wastewater valorization, recycling, environmental impact, and wastewater policies for post heavy metal removal. This book is an advanced and updated vision of existing heavy metal removal technologies with their limitations and challenges and their potential application to remove heavy metals/environmental pollutants through advancements in bioremediation. Finally, sections also cover new trends and advances in environmental bioremediation with recent developments in this field by an application of chemical/biochemical and environmental biotechnology. Outlines the fate and occurrence of heavy metals in Wastewater Treatment Plants (WWTPs) and potential approaches for their removal Describes the techniques currently available for removing heavy metals from wastewater Discusses the emerging technologies in heavy metal removal Covers biological treatments to remove heavy metals Includes the valorization of heavy metal containing wastewater
Download or read book Control and Treatment Technology for the Metal Finishing Industry written by and published by . This book was released on 1980 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hazardous Waste Reducation in the Metal Finishing Industry written by PRC Environmental Management, Inc and published by William Andrew. This book was released on 1989-12-31 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: "From the Foreword: " This book presents the results of a waste audit study for the metal finishing industry. The study, carried out for the State of California but applicable for metal finishers elsewhere, identifies opportunities for waste reduction available to the metal finishing industry and develops procedures that can be used by metal finishers to assess their own waste reduction opportunities. The study emphasizes technologies available to small- and medium-sized metal finishing plants. Typically, these shops operate a variety of physical, chemical, and electrochemical processes. Chemical processes include degreasing, cleaning, pickling, etching, coating, and electroless plating. Electrochemical processes include plating and anodizing. The tasks included in the study were: (1) selecting metal finishing plants to include in the study, (2) performing a waste audit at each selected plant, (3) developing recommendations for implementing waste reduction technologies at each audited plant, (4) discussing with facility representatives the feasibility of implementing the waste reduction recommendations, and (5) developing this waste audit study report and methodology. The study identifies three categories of waste reduction technologies that are available to metal finishers: (1) source reduction, (2) recycling and resource recovery, and (3) alternative treatment. The costs associated with implementing these technologies range from a few hundred dollars for making simple improvements in housekeepiing and minor process modifications to tens of thousands of dollars for installing recovery or treatment units. The benefits realized from implementing such improvements include reductions inmaterial purchase and waste disposal costs, as well as reduction in the liability
Download or read book Control and Treatment Technology for the Metal Finishing Industry written by and published by . This book was released on 1981 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selective Removal of Chromium Copper Nickel and Zinc from Waste Streams written by Mark Alan Fletcher and published by . This book was released on 1991 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sustainable Metal Extraction from Waste Streams written by Garima Chauhan and published by John Wiley & Sons. This book was released on 2020-02-27 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive overview on developing sustainable practices for waste minimization via green metal extraction from waste streams This book introduces readers to sustainable management and defines the challenges as well as the opportunities in waste stream management. It starts by covering conventional technologies for metal extraction then focuses on emerging tools and techniques such as green adsorption, bioleaching, and chelation. It also discusses the scale-up and process intensification of metal extraction from waste streams from process design to pilot plan. Sustainable Metal Extraction from Waste Streams begins by covering sustainability-related constructs and illustrates the pre-requisites for sustainable management of waste streams. It then introduces the basics of solid waste handling, ranging from an analysis of the relevance, categories of wastes, consequences of untreated waste disposal into the environment, government initiatives, management strategies, and unit operations for pre-treatment of wastes. The book also looks at widely accepted, conventional metal extraction technologies like hydro and pyro metallurgical methods; discusses the possibility of sustainable green processes for metal extraction; and introduces the recently deployed coiled flow inverter process. -Provides a comprehensive collection of the conventional, emerging, and future technologies for metal extraction from industrial waste and electrical & electronic equipment in a sustainable way -Demonstrates trans-disciplinary research as an executable direction to achieve the sustainable governance of natural resources and solid waste management -Presents a dedicated section on scale-up and process intensification of metallurgical processes -Summarizes various aspects of novel processes ranging from basic concepts, benchmark performance of technologies on lab scale, and recent research trends in metal extraction Covering a variety of interdisciplinary topics on resource optimization and waste minimization, Sustainable Metal Extraction from Waste Streams is an excellent resource for engineers, science students, entrepreneurs, and organizations who are working in the field of waste management and wish to gain information on upcoming sustainable processes.
Download or read book Metal Recovery from Industrial Waste written by Clyde S. Brooks and published by CRC Press. This book was released on 2018-01-18 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is offered as a practical primer on the hydrometallurgy of nonferrous metal reclamation from industrial wastes, as well as a brief discussion of pyrometallurgy, biological, and other separation processes. The objectives are to acquaint nontechnical readers with the subject as well as providing a detailed survey of current research and industrial practice to technical readers concerned with the management of industrial waste.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternative Treatment of Organic Solvents and Sludges from Metal Finishing Operations written by and published by . This book was released on 1983 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electroplating written by Darwin Sebayang and published by BoD – Books on Demand. This book was released on 2012-04-11 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book emphasizes on new applications of electroplating with consideration for environmental aspect and experimental design. Written by experienced expert from various countries, the authors come from academia and electroplating industrial players. Here, a very detailed explanation to the new application of the electroplating is followed by a solution of the environmental issue caused by the electroplating process and concluded by experimental design for optimization of electro deposition processes. Coverage included: 1) Preparation NiO catalyst on FeCrAl Subtrate Using Various Technique at Higher Oxidation Process 2) Electrochemical properties of carbon- supported metal nanoparticle prepared by electroplating methods 3) Fabrication of InGaN-Based Vertical Light Emitting Diodes Using Electroplating 4) Integration Of Electrografted Layers for the Metallization of Deep Through Silicon Vias 5) Biomass adsorbent for removal of toxic metal ions from electroplating industry wastewater 6) Resistant fungal biodiversity of electroplating effluent and their metal tolerance index 7) Experimental design and response surface analysis as available tools for statistical modeling and optimization of electrodeposition processes
Download or read book Publications a Quarterly Guide written by and published by . This book was released on 1978 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Indexes written by United States. Environmental Protection Agency and published by . This book was released on 1983 with total page 1760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to the Economic Removal of Metals from Aqueous Solutions written by Yogesh C. Sharma and published by John Wiley & Sons. This book was released on 2012-01-10 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides public health, sanitary and water engineers baseline data for designing plants for the treatment of industrial effluents rich in the metallic species in general and that of nickel and chromium in particular. DescriptionWater pollution is a topic of immense and common concern throughout the world. With a rapidly escalating global population and increased industrial development in a growing number of countries, the world's freshwater resources have become stressed. One way to get more out of less is 'treatment and reuse'. Nickel and chromium are toxic metals and they are used extensively in numerous industries such as textiles, beverages, steel, pulp and paper, and electroplating. Their industrial effluent contains large measures of non-biodegradable traces that are harmful to flora, fauna, and human beings. Although there are a number of methodologies used for treatment of metal-containing industrial effluents and waste water, there is not one up to now that offers a high capacity removal rate at an economical cost. This book presents the results and data from research and adsorption experiments carried out on the removal of nickel and chromium (as well as other metals) from aqueous solutions using modified silica sand. The data resulting from detailed kinetic, equilibrium and thermodynamic studies, show that the removal capacity is increased so the treated water has a higher quality or purity. It also demonstrates that the extraction of metals is achieved at a significant lower cost because the treated water adsorption is a simple process with less maintenance, and because silica is a nontoxic natural material widely available in all parts of the world.
Download or read book Treatability Manual Summary written by and published by . This book was released on 1981 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
